Several effective recipes for descaling a kettle with soda

Regardless of what material the kettle is made of, over time scale begins to appear on its walls.

This is nothing more than undissolved salts and other trace elements present in large quantities in tap water.

The problem of scale cannot be ignored, because it not only gives boiled water a specific taste, increases the boiling time, but also significantly reduces the service life of the household appliance.

About how you can descale the kettle soda, we’ll tell you in the article.

Is it possible to clean, the pros and cons of the procedure

The cleaning properties of baking soda have been known for a long time. Sodium bicarbonate (also known as sodium bicarbonate or simply soda), dissolving in hot water, destroys limescale, removes unpleasant odors and disinfects the walls of the kettle.

Pros of use soda for cleaning the kettle:

1. It not only cleans efficiently, but also disinfects the surface.
2. Absolutely safe for health, does not emit toxic substances upon contact with hot water.
3. Soda diluted with water can be used as a mild abrasive that does not leave scratches on the surface.

Among the negative characteristics, soda is insufficiently effective against old limescale deposits when used in its pure form. In order to enhance the cleaning properties, soda must be mixed with other ingredients (for example, salt or citric acid).

Instructions for cleaning at home

Algorithm of actions:

1. The kettle is half filled with water.
2. Add 2 tbsp. baking soda (per liter of water)
3. Bring the water to a boil, let the soda solution simmer for thirty minutes over low heat.
4. Afterwards, remove the kettle from the heat and leave it alone for two hours.
5. Remove softened layers of limescale (you can use a hard sponge).
6. Rinse dishes with clean water.

When using baking soda to clean an eclectic kettle, the boil setting must be turned on at least three times.

With vinegar

Descaling with vinegar and soda is an effective method, but not very suitable for plastic, metal or ceramic appliances. It is used in the most extreme cases, when other methods have not helped achieve the desired cleanliness result.

Algorithm of actions:

• the kettle is filled with water, table vinegar and soda are added (based on 2 liters of water - 100 ml of vinegar solution and 1 tablespoon of soda powder);
• The dishes are left to soak for at least six hours (preferably overnight);
• after that, the softened limescale deposits are removed with a sponge;
• Rinse the kettle thoroughly, changing the water several times.

With salt

At the same time, salt and soda will help get rid of limescale, both from the inside and the outside.

Algorithm of actions:

1. Prepare a cleaning solution. To do this, salt and soda are dissolved in water at the rate of 2 tbsp. dry ingredients per 1 liter of water.
2. The kettle is filled with the prepared solution, after which it is lowered into a wide basin so that the composition covers it on all sides.
3. The soda-salt solution is boiled for half an hour, after which the dishes are removed from the heat, cooled, and rinsed with cold water.

After cleaning with salt, the dishes must be thoroughly wiped with a dry towel. Otherwise, whitish stains will remain on the surface.

With citric acid

Citric acid and soda will help quickly remove limescale from the walls of electric and glass teapots.

It's simple:

• fill the dishes with water, add a bag of citric acid powder and baking soda (calculation: 1 tablespoon of dry ingredients per 1 liter of liquid);
• boil water with citric acid and soda for at least ten minutes, after which the kettle is left alone for at least one hour;
• water, along with dissolved particles of limescale, is poured into the sink.

With lemon and acetic acid

A solution of acetic acid in combination with slices of fresh lemon and soda is “heavy artillery” in the fight against old limescale deposits.

Algorithm of actions:

1. 4 tablespoons are diluted in a liter of water. vinegar and a few slices of fresh lemon, 2 tbsp. baking soda.
2. The prepared solution is poured into a kettle and boiled for thirty minutes
3. Softened layers of scale are removed with a soft sponge.

After the walls of the kettle are cleared of scale, clean water is additionally boiled in it (preferably twice).

How often should deposits be removed?

Regular cleaning will help prevent excessive limescale build-up.

The frequency of cleaning is affected by the quality of the water used.. By pouring bottled or well-filtered water into dishes, you can reduce the number of cleanings to a minimum.

Features depending on material

When choosing a descaling method, it is important to consider the material the kettle is made of.

Enameled surface

It is not recommended to clean enamel coatings with citric acid alone or in combination with vinegar.

The whole point is that acid wears away enamel coating, which leads to the very rapid appearance of pockets of rust and corrosion.

In addition, enamel surfaces are easily scratched by loose powders and other abrasive cleaning compounds.

The most suitable means of removing limescale from an enamel surface are:

• sparkling water,
• special cleaning tablets,
• peeling potatoes or apples.

To prevent the enamel kettle from changing color during cleaning with carbonated water, you must use only colorless drinks (for example, mineral water).

Electric

Particular care should be taken when using citric acid.. It's simple: an aggressive environment destroys rubber seals, thereby reducing the service life of a household appliance.

Stainless steel

Citric acid and carbonated drinks will help you quickly clean a stainless steel kettle from limescale (it is not necessary to choose soda without dyes).

Particular care should be taken when choosing abrasive detergents. Small particles perfectly remove limescale, but unfortunately they leave scratches on the gloss of stainless steel, which are impossible to get rid of.

Ceramics

The main rule for cleaning ceramic dishes is that all actions must be extremely careful. Ceramics cannot withstand impacts, strong friction, or sudden temperature changes.

The optimal choice of cleaning method for a ceramic teapot is to use citric acid, soda and household chemicals.

Glass

You can maintain the original appearance of a glass teapot only with regular cleaning. Vinegar water or special chemicals will help remove limescale deposits..

Alternative means to remove plaque

It's easy to descale your kettle. There are a huge number of folk remedies and special chemicals that help to clean quickly and efficiently.

Top 3 most popular folk remedies:

1. Sweet carbonated drinks. The composition of the soda contains citric acid, which corrodes any, even very dense layer of limescale. The kettle is filled with sweet carbonated water and brought to a boil.

   After the boiled soda has cooled, leave the dishes alone for thirty minutes. The last stage is to rinse the already cleaned surfaces thoroughly with cold running water.

2. Apple and potato peelings. The container is filled with vegetable and fruit peelings, then filled with water and placed on the fire to boil. After the cleaning has been boiled for five to ten minutes, the kettle is turned off and left alone for at least three hours. This time is enough for the scale to become soft and can be cleaned off with a sponge.
3. Aspirin tablets. It is enough to dissolve four aspirin tablets in 2 liters. water, pour the resulting liquid into the kettle. The solution with aspirin is boiled for at least thirty minutes, after which the walls are easily cleaned with a soft sponge.

Top 3 special anti-scale cleaners:

1. Top House Cleaner. A liquid consisting of 5% organic acid will carefully and quickly clean limescale deposits from the inner surface of a kettle and coffee machine. The liquid is odorless and does not cause allergic reactions upon contact with skin. Manufacturer Germany. The average cost is 260 rubles. (500 ml bottle).
2. Topperr 3031 — a concentrated product from a German manufacturer will clean surfaces from limescale the first time. Topperr 3031 will protect the walls of the kettle and coffee maker from the rapid formation of plaque. The cost of the concentrate is 140 rubles. (250 ml bottle).
3. Gel SANO Antikalk Kettle Descaler Effective for cleaning ceramic, glass, plastic teapots. Developed on the basis of phosphoric and sulfamic acid. Economical consumption and low cost make SANO Antikalk Kettle Descaler gel very popular among consumers. The average cost is 350 rubles. (700 ml bottle).

Adviсe

To make the descaling process quick and effective, Experts recommend using some tips:

1. The most effective cleaning products contain acid (citric acetic acid, fruit acid).
2. If the scale cannot be cleared the first time, it must be carefully rubbed with a scraper, and then the cleaning must be repeated.
3. After the limescale has been removed, the kettle is filled with clean water and boiled again. These simple steps will help remove any remaining cleaning products.

Experienced housewives also recommend using only filtered water for boiling. In this case, the scale problem will occur much less frequently.

Conclusion

Cleaning a kettle from limescale is a procedure, the regular implementation of which will help preserve the appearance and extend the life of the household appliance. Using baking soda correctly will help restore your kettle to sparkling cleanliness.