Nagar

The main work surfaces of the kitchen are constantly in contact with food and high temperatures. As a result, a layer of soot appears on them, which cannot be cleaned with ordinary detergents.

To cope with it and not damage kitchen utensils, use improvised means and special chemicals. Read the article about how to quickly and safely remove carbon deposits.

Traditional methods for use at home

To get rid of a layer of burning, it is not necessary to purchase expensive or caustic chemical compounds. You can use available tools that are found in every housewife’s kitchen.

Mode of application:

1. Remove large debris from the surface. If some of the carbon deposits flake off before applying the cleaning agent, then sweep it away with a brush.
2. Wet the area that needs treatment with vinegar at a concentration of 9% or 6%. It is most convenient to apply it using a sprayer.
3. Soda is poured on top of the liquid.
4. 20 minutes after completion of the reaction, the surface is rinsed with clean water.

If necessary, repeat the procedure again.Most often this is required when the soot layer is old and thick.

Another effective recipe is a soap-soda solution. Mode of application:

• grind laundry soap;
• mix it in equal proportions with soda, add water - the result should be a creamy mass;
• the mixture is applied to the surface that needs cleaning, left for an hour - if it dries out, it is moistened with a spray bottle;
• clean the surface with a soft brush and rinse with clean water;
• This gentle and effective carbon remover can be used several times in a row.

Regular table salt dissolves old carbon deposits well, but it will take time to get results. Mode of application:

1. Dissolve 4 tablespoons of table salt in two glasses of clean water. In order for it to disperse better, the water must be hot.
2. Wet the surface generously with saline solution. If possible, the product is completely immersed in it.
3. Leave to soak overnight.
4. In 12 hours, the carbon deposits will soften and can be easily removed with a brush.

These recipes are universal. They can be used on any surface.

How to remove with special preparations?

There are compositions on sale that are designed to remove carbon deposits from various products. You can purchase care products for:

• behind the slabs,
• dishes,
• grill and more.

The main thing is to use them for their intended purpose. Top 3 compositions for combating carbon deposits:

Forte Plus Sano

Active foam is easy to apply using a sprayer. The composition acts quickly and effectively, thanks to the high concentration of cleaning substances. The product is suitable for caring for:

• microwave oven,
• kitchen stoves,
• grills,
• ovens.

Price – 600 rubles.

Stop-burn + Anti-nagar

The composition for cleaning stoves and grills can be used to remove smoke from metal and enamel surfaces. It effectively copes even with old stains. Price – 200 rubles.

Kenolux Grill CID Lines

Concentrated liquid to combat carbon deposits and old fat. The composition is suitable for processing stoves, ovens and grills. Price – 800 rubles.

You need to choose a product that is marked “from carbon deposits”. Universal broad-spectrum formulations may be ineffective.

How can you clean various surfaces?

Carbon deposits appear not only on dishes, but also on kitchen appliances. It can often be found on baking sheets, on various elements of gas and electric stoves, on microwaves and more. Depending on the type of surface, the methods for removing it will differ.

Baking tray

There are several ways to remove carbon deposits from a baking sheet. The most effective means include:

1. Coca-Cola or other carbonated water containing phosphoric acid. Pour it into the dishes and leave for 3-6 hours. You can speed up the process by heating the liquid.
2. Soda with hydrogen peroxide. First, the baking sheet is generously moistened with peroxide, then sprinkled with soda and left for an hour.
3. Soaking in a solution of laundry soap. To prepare it, you can use liquid soap or grind the bar into shavings. Soak the baking sheet in the solution for 2-3 hours.

Gas and electric stove

You can clean your gas stove from carbon deposits using baking soda and dish soap. The main thing is to prevent liquid from getting on the burners.

Procedure:

• moisten the surface with a soap solution prepared on the basis of water and liquid dishwashing detergent;
• sprinkle the stove with soda;
• leave for 30-40 minutes;
• remove softened soot with a sponge;
• Wash with clean water and wipe dry with a cloth.

Carbon deposits from an electric stove are cleaned with an alcohol-based product. You can use glass cleaner. If the carbon deposits are not removed the first time, the liquid is left to act for 30-40 minutes, periodically moistening the surface. After washing, wipe the stove dry.

For the care of gas and electric stoves Do not use hard brushes or sponges, as they will leave behind scratches.

Lattices

You can remove carbon deposits from the grate of a gas stove using ammonia. It, in the amount of 2 tablespoons, is poured into a bag, in which a wire rack is placed and left overnight. In the morning, all that remains is to rinse it with clean water and clean it with a brush.

You can resort to thermal treatment. To do this, heat the grate in the oven and remove the soot with a wire brush. After this treatment, all that remains is to rinse it with clean water and put it back in place. Will tell you more details this article.

Oven

You can quickly get rid of oven deposits using citric acid. Lemon in an amount of 10 g is diluted with warm water, which is poured into a baking tray. The oven must be preheated to 200 degrees, place the solution inside, close the lid and leave for 40 minutes. Then the gas is turned off, the baking sheet is removed, and the cooled oven is washed with any cleaning agent.

Read more here.

Dishes

You can remove carbon deposits from dishes using baking soda and salt. They are used in the following way:

1. Warm water is filled into the burnt container.
2. Pour 1-2 tablespoons of soda and salt into it.
3. Place the container on the gas stove and let the water boil.
4. After half an hour, the liquid is drained and the carbon deposits are removed with a brush.

You can also use acids: acetic or citric. They are used like soda and salt, but without heating. It is enough to keep the acid in a burnt container for an hour. After which you need to wash it in the usual way.

From the pan

You can clean a burnt pan using hydrogen peroxide and ammonia. Procedure:

• prepare a cleaning solution: for 1 liter of water you will need 50 ammonia and the same amount of peroxide;
• the liquid is boiled for half an hour, left to cool;
• drain the solution and clean the walls of the pan with a brush.

You can find out how to remove carbon deposits from a pan here, with enameled - Here.

How to remove smoke in the microwave?

You can get rid of burning in the microwave using regular steam. Procedure:

1. Pour clean water into a deep bowl. To add a pleasant aroma, you can add lemon zest to it.
2. Place the container in the microwave and turn it on at full power.
3. Leave the water to boil for 10 minutes.
4. Allow the device to cool, remove the bowl and wash the walls with a damp soft cloth.

This method is effective against not only soot, but also fat deposits.

From the frying pan

You can remove carbon deposits from a frying pan mechanically. To do this, use regular sand..

The surface of the product is sprinkled with it and rubbed with a brush.When the main layer of burning has been removed, the dishes are washed using soda.

Cast iron frying pans are easy to clean using the baking method.. The dishes are baked in the oven at high temperature. When exposed to heat, the soot will fall off on its own.

Read about cleaning a frying pan from carbon deposits here, cast iron utensils - Here.

What should you not do?

Prohibitions that must not be violated when removing burning from various surfaces:

1. It is not recommended to treat stainless steel products with salt. They may darken.
2. Do not use acids or abrasives to clean enamel kitchen utensils.
3. Cast iron products cannot be kept in water for a long time to prevent them from rusting.
4. Aluminum surfaces are not treated with soda and alkaline compounds.
5. Teflon cookware does not tolerate contact with powders, hard brushes and sponges.

Helpful information

Tips to help remove carbon deposits from dishes and stoves:

1. Kitchen utensils should be cleaned immediately. If you continue to cook on such surfaces, the layer of soot will become thicker and will be more difficult to deal with.
2. After using any chemicals, the dishes should be rinsed several times with clean water, or better yet, boiled.
3. To make your dishes smell nice after removing the deposits, you can boil a few coffee beans in them.

Conclusion

Removing carbon deposits from the stove, dishes and oven is not difficult if you choose the right product. You can deal with soot using improvised means and household chemicals. The main thing is to use compounds that are not capable of harming the product.