Useful tips on how and with what you can clean carbon deposits from an enamel pan inside and out

Enameled cookware is ideal for preparing soups and porridges, but if it burns, then its further use becomes impossible.

However, there is no need to rush to the store for new dishes; burnt kitchen utensils can be revived.

Read the article on how to clean carbon deposits from an enamel pan inside and outside.

How to remove using folk remedies?

To clean the pan from carbon deposits, you can use improvised means. A composition based on:

• water,
• soda,
• salt,
• vinegar.

Mode of application:

1. Pour water into the container. It should completely cover the burnt areas.
2. Add soda, salt and vinegar at the rate of 1 tablespoon per 500 ml of water.
3. Turn on the gas and bring the liquid to a boil. When the water begins to boil, reduce the gas and leave the solution to simmer over low heat for half an hour. There is no need to cover the pan with a lid.
4. After 30 minutes, the water is drained and the pan is washed in the usual way. If necessary, I use dishwashing liquid.

If the dishes are burnt on the outside, you can remove carbon deposits in a similar way. The solution is prepared according to the proposed recipe, but it is poured into a large container in which the pan is placed and boiled.

Procedure:

• remove any leftover food from the dishes;
• pour carbonated water into the pan so that it completely covers the burnt areas;
• leave the drink for 12 hours;
• Drain the Coke and wash the dishes as usual.

The process of dissolving carbon deposits can be accelerated if the soda is heated.

1. Pour the whey into the pan.
2. Bring it to a boil.
3. Boil the milk drink for half an hour, cool and drain it.
4. Clean the dishes with a soft brush.
5. To enhance the effect, you can add several apple slices to the serum.

The fumes will be released due to the influence of fruit and lactic acid. This method is suitable for those who are against the use of household chemicals.

You can get rid of carbon deposits using hydrogen peroxide. If the layer is thick, then the recipe should be strengthened with soda.

Mode of application:

• hydrogen peroxide is mixed with soda - for processing you need a composition that will resemble thick sour cream in consistency;
• the finished product is applied to the walls and bottom of the pan;
• leave the peroxide to act for an hour - to enhance the effect, you can put the dishes in a bag and tie it tightly;
• When the peroxide takes effect, wash it off with clean water.

If, after removing the carbon deposits, the dishes still smell like burning, you can boil a few slices of lemon in it. This will eliminate the unpleasant odor and slightly whiten the inner surface of the pan.

Fresh soot can be dealt with with mustard. Mode of application:

1. Prepare a cleaning solution: for 1 liter of water you will need 2 tablespoons of mustard powder.
2. The product is poured into the burnt pan so that it completely covers the problem areas.If carbon deposits have formed not only inside, but also outside, then the entire dish is immersed in the basin.
3. Leave on kitchen utensils for 2 hours.
4. The softened carbon deposits are removed with a sponge and the dishes are washed with clean water.

Mustard copes not only with burning, but also with fat deposits.

If carbon deposits do not come off well, the exposure time is increased to 12 hours.. When the layer softens, it is removed with a soft brush, after which the dishes are washed in the usual way.

How to remove with special compounds?

If you don’t want to use homemade recipes, you can purchase special formulations designed to remove carbon deposits from dishes. Top 3 effective remedies:

Non-stick Floreal

The composition is available in the form of a spray, suitable for treating metal surfaces, and effectively copes with old grease and smoke. Price – 250 rubles.

Bright

The cleaner for enameled gas and electric stoves and surfaces is available in the form of a liquid, which is bottled in a convenient bottle equipped with a dispenser. The composition acts quickly, it is applied to the contaminated area, left for 2 minutes and washed off. Price – 160 rubles.

Dr. Beckmann

The release form of the detergent is gel. It contains surfactants, xanthan gum and sodium hydroxide. The product does not harm enameled surfaces and allows you to get rid of carbon deposits and old fat. Price – 345 rubles.

When purchasing, you need to pay attention to the following points:

1. Compound. The enamel is resistant to salts and acids, it can be washed with a surfactant-based product, soda and soap.
2. Scope of application. The product must be intended for the care of enamel surfaces.
3. Release form. You should not purchase powder formulations, as they contain abrasive particles. Preference is given to gels and liquids.
4. Price. The more natural and high-quality the composition, the higher the cost of the final product.

• It is most convenient to apply the product using a sprayer;
• The holding time of the cleaning agent should not be increased independently - violation of the manufacturer’s instructions can lead to damage to the enamel;
• When working with household chemicals, you need to take care of your safety; to do this, protect the skin of your hands with gloves;
• If the substance has a strong odor, then the cleaning process should be carried out in a well-ventilated area.

Detergents should be stored closed, out of the reach of children.

Prevention of darkening of enamel and yellowing

To prevent the enamel pan from turning yellow and becoming covered with a dark coating, The following recommendations must be followed:

1. Only liquid dishes can be cooked in such a container. It should not be used instead of a cauldron or frying pan.
2. For preventive purposes, once a month, boil the pan with dishwashing liquid or a soda solution.
3. Do not leave an empty pan on a hot stove.

What should you not do and why?

To avoid damaging the enamel pan during cleaning, follow the following recommendations:

• They are not cleaned with coarse bristle brushes, metal brushes, or even the back of a sponge, because... cracks and chips that appear on the surface will act as a gateway for harmful ions to penetrate food, which will negatively affect human health;
• Do not use abrasive compounds - they will damage the enamel layer, causing the dishes to constantly burn;
• enamel does not tolerate temperature changes, so it must be washed after it has cooled completely; you should not fill hot dishes with cold water.

Helpful information

Tips to help you remove carbon deposits efficiently and safely from an enamel pan:

1. You need to soak the pan immediately after food has burned in it. If you miss time, it will be problematic to cope with the layer of burning.
2. After using cleaning products, dishes should be rinsed thoroughly to completely remove any remaining chemicals.
3. Do not attempt to bleach a pan using bleach or bleach. These substances are hazardous to health.
4. When purchasing cleaning compounds, you need to pay attention to the label on the packaging. The product must be designed to combat carbon deposits. Universal formulations are not highly effective.
5. An enamel pan can be washed in the dishwasher, but it will not be possible to remove carbon deposits using technology. Manual processing will be required.
6. To soften the hardened layer of carbon deposits, you need to soak the dishes in hot water. The holding time should be at least 2-3 hours.

Methods and means for cleaning various surfaces from carbon deposits are presented in given section.

Video on the topic of the article

The video will show you how to remove yellowness from an enamel pan:

Conclusion

You can deal with carbon deposits on an enamel pan using improvised means and specialized household chemicals. In order to properly clean dishes that are burnt and covered with a yellow coating, you must follow the instructions and not violate the basic prohibitions.