Simple ways to remove glue from stickers from plastic

Children's stickers, store labels and stickers from product manufacturers often leave a sticky residue on things when removed from the surface.

How to remove glue from a sticker on plastic? Time-tested home recipes and special products aimed at removing labels and traces of glue will help remove remaining sticky stains.

How to remove marks from a label?

The choice of method for cleaning a plastic surface from any contaminants must take into account all the characteristics of the material.

Since there are a wide variety of types of plastic, before using even a seemingly safe cleaning method, it is necessary to test the surface reaction in an inconspicuous area.

Oil (fat)

Vegetable oil will allow you to cope with the remnants of labels and stickers due to its ability to soften the adhesive layer.

Application:

1. It is advisable to first remove the top paper layer of the label.
2. The oil is applied with a napkin or cotton swab to the affected area.
3. Leave to act for a quarter of an hour.
4. Clean off the softened glue with a scraper or other object without sharp edges.
5. Wash with a degreasing agent, such as dishwashing detergent.
6. Wipe dry with a rag.

When applying oil, it is necessary to control that it does not spread over a large area and does not flow into the joints between individual parts.

Soap solution

The volume of soap solution depends on the area to be cleaned. For a large area, take a bucket of warm water and dilute a package of liquid soap in it.

If there are unwashed areas left, the process is repeated. For small stained areas, simply pour a little detergent onto a wet sponge and rub the stains.

This method is one of the safest in terms of impact on plastic.

How to remove with kerosene (gasoline)?

One option for removing sticker marks is kerosene. Gasoline and lighter refill will also work.

Application procedure:

• moisten a napkin in the prepared product;
• apply the composition to the mark left by the tape or sticker;
• leave for a couple of minutes;
• rub with a rag;
• clean off with a spatula;
• wash with detergent.

Kerosene may react with some types of plastic, so preliminary testing is a must.

Acetone

Acetone will work best when the top layer of the label has already been removed.. Use a swab dipped in the preparation to thoroughly moisten the areas with remaining glue. After leaving for 10-15 minutes, remove the glue with a plastic spatula. At the end of cleaning, the surface of the plastic is washed.

Vinegar

Table vinegar can help remove glue residue quickly and easily. To do this, perform the following steps:

1. The sponge is soaked in vinegar.
2. Rubbing the dirty area.
3. Leave for a couple of minutes so that the acetic acid interacts with the adhesive base of the sticker.
4. If the stain cannot be removed with a scraper and washcloth, repeat moistening with vinegar.
5. The plastic is washed with water.
6. Wipe dry.

Acetic acid may cause some clear plastics to become cloudy.

Boiling water

For removing stickers, a suitable option is to apply high temperature to the adhesive base of the sticker. An example of such an application is boiling water.

In order for the adhesive base of the former sticker to soften, very hot water is poured onto it. This makes the adhesive layer viscous and pliable.. In this state it will be easy to clean.

Using high temperature is only possible with heat-resistant plastic.

Hairdryer

On a household hair dryer, set the regulator to the hot air supply mode. Direct the bell to the place with the glue stain. Under the influence of high temperature, the adhesive part will begin to melt, which makes it easy to remove without applying any effort.

Cleaning agent

Household cleaners (gels, sprays, etc.) can also be used to remove stickers. When choosing a product, keep in mind that some granular cleaning products have an abrasive composition that can cause scratches.

When choosing a household chemical for treatment, you must first study the instructions for it., paying attention to what surfaces it is intended for cleaning, and whether plastic is included in the list.

Soda

Baking soda can only be used on rough plastic surfaces.Otherwise, scratches may remain after cleaning.

Work order:

• pour into a prepared flat container? glasses of soda;
• add enough water to form a thick paste;
• pour in 1 tbsp. l. dishwashing detergents;
• stir the composition;
• apply in a circular motion onto the adhesive trace using a sponge;
• after rubbing the composition, it is left on the surface for several minutes;
• rub with a washcloth;
• wash off with water;
• wipe with a dry cloth.

Even with plastic that is resistant to mild mechanical stress, it is better to avoid intense friction with soda.

Stationery eraser

Before using the eraser, the adhesive mark must be moistened with water. and leave for 15 minutes to soften.

This method allows you to remove adhesive marks without damaging the surface.

How can I remove the residue and clean the plastic?

In addition to home remedies, special remedies can help. They come in a compact package that allows you to keep the sticker remover handy and are effective.

Since plastic is a demanding material when it comes to cleaning conditions, Before purchasing a new product, it is recommended to study the instructions and clarify whether the product can be used on plastic.

HG

The product is available in liquid form. Packaging volume – 0.3 l, cost about 500 rubles. Contains up to 15% nonionic surfactants.

Application procedure:

1. Apply to glue or sticker.
2. Leave for 5 minutes.
3. Rub with a brush.
4. If cleaning does not help once, repeat again.

Advantages of use:

• efficiency;
• Ease of use.

Flaw:

• persistent unpleasant odor;
• price.

Glutoclean

The product, made in Germany, is designed to remove stickers from various surfaces, including plastic. The price of 500 ml is about 600 rubles. The composition contains non-ionic surfactants (5%).

Application:

1. Dampen a cloth with Glutoclean.
2. Moisten the remaining sticker marks.
3. Leave for 1-2 minutes.
4. Rub with a brush.
5. Rinse.
6. Wipe off.

Advantages of use:

• careful attitude towards the surface being cleaned;
• high efficiency;
• ease of use.

Minuses:

• not low cost;
• Packaging is not convenient in all cases;
• repeated exposure may be necessary.

KUDO

The product is produced in Russia, has a 0.4 liter aerosol package, suitable for use on glass, plastic, ceramics and other surfaces.

The product has many advantages:

• good removal of traces of glue, including old ones;
• ease of use;
• economical consumption;
• affordable price.

8 useful tips

When cleaning plastic surfaces, the following points must be taken into account:

1. Plastic does not allow the use of sharp objects (knife, blade, scalpel) for cleaning, as they leave scratches.
2. If the plastic is painted with paint, then removing the sticker can also lead to the removal of the paint layer. In this regard, it is advisable to start cleaning with gentle methods.
3. The use of melamine sponges for cleaning surfaces that come into contact with food is prohibited.
4. It is recommended to work with solvent wearing protective gloves and in a ventilated area.
5. Exposure to high temperatures is only permissible for heat-resistant plastic.
6. It is necessary to try to collect and remove glue from the surface immediately, softened under the influence of any solvent, without allowing it to be spread over a large area.
7. Where home remedies have failed, you can try using special ones.
8. If after removing the sticker there is a sticky layer left, it is advisable to try to remove it immediately. Otherwise, dust and other contaminants will stick to it, which will be much more difficult to remove.

Useful information on removing adhesive traces from plastic surfaces - Here.

Video on the topic of the article

The video will show you how to remove glue residue from a sticker from plastic without using chemicals:

Conclusion

Using special products and simple home recipes, you can remove even old or poorly cleaned labels from plastic, leaving behind a sticky layer.

To make the result pleasing, you can use several recipes in turn.. At the same time, cleaning should not be accompanied by the application of force and involve exposure to sharp objects.