Methods and means to remove super glue from plastic

Superglue comes to the rescue when you need to quickly and firmly connect two parts together.

When carrying out work, there is always a risk that the adhesive substance may get onto a plastic surface that does not need gluing.

If you do not remove the stain immediately, it will dry out and become more difficult to deal with. Read the article about how and what to remove super glue from plastic.

How to remove “Moment” at home?

When choosing a glue remover, they are primarily guided by its composition. First you need to try to cope with the problem with non-aggressive substances, for example, soap solution or alcohol. If the stain does not react, resort to solvents. This can be acetone, Anti-glue, Dimexide.

Soap solution

If glue has recently got onto the surface of the plastic, you can try to remove it with a soap solution. To prepare, you will need ground laundry soap and hot water.

Mode of application:

1. Apply the soap solution to the stain.
2. Leave to act for 30 minutes.
3. Wipe the contaminated area with a rag.
4. Rinse with clean water.

If it was not possible to completely remove the glue the first time, repeat the procedure. This method is not suitable for dealing with old stains that are a day or more old.

Laundry soap can be replaced with toilet soap, but its effectiveness is several times lower.

How to clean dried stains with alcohol?

Alcohol has the ability to break down glue molecules without harming the structure and color of the plastic. Apply it as follows:

• apply alcohol to a cotton pad;
• treat the stain with it, wiping it several times;
• leave the disc in the form of a compress; if the glue layer is thick, start cleaning after 30 minutes;
• rub the sticky mass until it completely dissolves;
• Rinse the treated area with water.

Wiper

You can deal with glue stains using a household glass and mirror cleaner. Such products contain surfactants and alcohols (most often isopropyl and ammonia). Together, these components have good cleaning ability.

Mode of application:

1. Spray the solution onto the contaminated area.
2. Leave to act for 15 minutes. At this time, you need to ensure that the liquid does not evaporate and the stain remains moist. If necessary, soak the fabric in the cleaner and place it on top.
3. The softened glue is removed with a paper napkin until completely dry.

The first time it is possible to cope only with fresh stains. If they are old, you will need to repeat the procedure at least 2 times.

How to remove dirt with Dimexide?

One of the best solvents for Moment glue is the anti-inflammatory drug Dimexide. You can purchase the concentrate at any pharmacy.

Mode of application:

• soak a cotton pad or cloth with the composition;
• apply it to the plastic surface and leave for 5 minutes; if the stain is fresh, then there is no need to apply a lotion;
• remove the dissolved glue with a paper napkin;
• wipe the treated area with a damp cloth.

If there is already other damage on the plastic surface, then it is better to avoid using Dimexide so as not to aggravate the situation.

Dimexide can damage painted panels, causing light spots to appear on them.. Therefore, you need to test it in an inconspicuous area.

Acetone

Using acetone, you can quickly remove Super Glue from plastic, but you need to act carefully and quickly so as not to damage the surface.

Mode of application:

1. Apply the composition to a cotton pad.
2. Rub the stain several times until it disappears completely.
3. Clean the surface with a clean damp cloth.

Do not use acetone to clean varnished plastic surfaces. It will damage the glossy layer and ruin the product. If in doubt, test the solvent on an inconspicuous area.

A less aggressive composition is nail polish remover.. It can also dissolve superglue, but without the risk of damaging the plastic itself. You need to wear gloves when working with acetone.

Anticlean

When using anti-adhesive “Moment”, “Strength” or “Contact”, you need to remember that all these compounds can lead to damage to the product. There are no universal recommendations; it all depends on the type of plastic.

Instructions for use:

• unscrew the cap;
• squeeze the cleaner onto the glue stains;
• leave to act for 10 minutes;
• remove the dissolved composition with a napkin, rinse with water and dry.

If it was not possible to clean the glue the first time, repeat the procedure again, increasing the exposure time. While the gel is on the plastic, you need to monitor its reaction. In case of any changes, the composition is immediately removed.

Boiling water

If glue has recently appeared on the surface, you can try to remove it with hot water. The higher its temperature, the better the effect.

Mode of application:

1. Heat water to a boil and pour it into a basin.
2. Immerse a plastic object in the container and leave it to soak for 15 minutes. Remove softened glue.
3. If the item cannot be soaked, place it under running hot water.
4. Another option is to continually soak a rag in boiling water and apply it to the stain until it becomes soft. After this, it can be rolled using any hard object, for example, the back of a knife.

This method will not help deal with old stains.

Petrol

You can get rid of glue stains using gasoline. There is no need to search for aviation fuel. Gasoline is suitable for refilling lighters.

Apply it as follows:

• moisten a rag or cotton pad with gasoline;
• rub the surface until the stain completely disappears;
• Wipe the plastic with a paper towel and rinse with warm water.

What can't be deleted?

There are several prohibitions that should not be violated When trying to remove Superglue from plastic:

1. Solvent should not be used without ensuring that it will not harm the product.
2. Do not remove the adhesive with sharp objects, such as a knife or blade.
3. Do not use abrasive compounds. They will lead to scratches and cracks on the surface of the plastic.
4. It is prohibited to use heating devices to soften the adhesive base. This applies to any sources of open fire, blowtorch, iron, hair dryer.
5. Do not use sandpaper to remove glue.

Adviсe

To quickly and effectively remove Super Glue from plastic, you need to adhere to the following recommendations:

1. You need to start cleaning immediately. Even if the stains are invisible, over time they will turn yellow and become more difficult to remove.
2. Apply any solvent to the stain precisely, being careful not to get it on a clean surface.
3. When working with aggressive compounds, you need to take care of your own safety by protecting the skin of your hands with gloves. The room in which the glue removal process takes place must be well ventilated.
4. When working with solvents, use a light cloth, gauze folded in several layers or cotton pads. The pigment will be washed out from the dyed material and may be absorbed into the plastic.

You can find out how to remove glue from plastic Here.

Conclusion

You can remove superglue from plastic using hot water, alcohol or soap solution. These compounds will not harm the product.

If it is not possible to cope with their help, use solvents:

• acetone,
• Dimexide,
• Anti-glue.

They quickly and effectively dissolve glue, but they must be used strictly according to the instructions.