Step-by-step guide on how to wash plastic windows correctly and without streaks

Plastic windows do not require special care. They do not need to be painted or insulated for the winter. Durable material is easy to clean, but not all products are suitable for this.

To ensure that the structure shines clean and the coating does not have a shortened service life, you need to listen to the recommendations of the manufacturers and the tips of experienced housewives.

We will tell you in this article how to properly wash plastic windows (slopes, frames) from the outside, how to remove the remains of polyurethane foam and old adhesive tape.

Wash according to instructions without special tools

Experienced housewives know that washing a window does not mean polishing the glass until it shines; all parts of the structure deserve attention. You should start with preparation: remove curtains, nets, clear the window sill. Then proceed to the main part.

Step-by-step instruction:

1. Cleaning frames with soapy water. In case of severe contamination, it is necessary to use professional liquids.
2. Removing dirt and stains from double-glazed windows. You can use a sponge with a special product, moving from top to bottom (repeat twice).
3. Processing of glass and profile joints. The greatest amount of dirt accumulates there. Do not allow alcohol-based solution to come into contact with the seal.
4. Rubbing glass.To avoid the formation of streaks on the glass, you must use a dry cloth or microfiber cloth.
5. The final stage is the window sill. Even stubborn stains should not be removed with household chemicals with an aggressive composition.

How to keep the outside clean?

You can do without a magnetic brush and a mop with a telescopic handle if:

• You need to wash the windows in a private house; you can use a stepladder and do it from the street side;
• the doors open inward - in this case, the process must begin with them.

In other cases, without risking the life and health of the owner, it is possible to clean the glass from the outside only with the use of special assistants.

Folk remedies

To safely clean plastic windows, you can use budget funds:

1. Soap. It must be grated (preferably a household grater), dissolved in water, applied with a sponge to the surface, rinsed with clean water and wiped dry.
2. Vinegar. Eliminates stains and repels insects. 50 g of the substance must be mixed with 200 g of warm water. Apply to the glass surface using a spray bottle and wipe dry.
3. Glycerol. Use a solution (60 ml added to 40 ml water) to wipe the glass. Suitable for preventing contamination; to combat stains, add 2-3 drops of ammonia to the liquid.
4. Ammonia. Effective in the fight against nicotine plaque, cleans and disinfects the surface. You need to mix 2 tbsp. l of ammonia and 400 ml of water, apply to the surface and wipe with a dry, lint-free cloth.
5. Lemon juice. Ammonia and vinegar have a pungent odor that not everyone likes. In this case, you can prepare a solution of lemon juice (50 ml) and water (200 ml). The processing principle is the same.

When cleaning glass with a solution of vinegar and ammonia, it is necessary to avoid getting the liquid on the rubber seal and profile; the aggressive composition of the substances can damage them.

Household chemicals

Manufacturers of plastic windows recommend using products specifically designed for them. The most popular:

1. Spray Clin “Windows and Mirrors” – an alcohol-based product will clean and form a water-repellent film on the glass surface. Convenient to use, economical, does not require polishing, does not leave streaks. Price - from 120 rubles.
2. Muscle liquid solution with ammonia Conveniently applied to glass surfaces thanks to a dispersion sprayer. Does not leave streaks and copes with stubborn stains (oil, soot). Price - from 120 rubles.
3. Cif – alcohol based liquid, effectively fights greasy stains and stubborn dirt, cleans glass effortlessly. Easy to use and economical thanks to the spray nozzle. Price - from 100 rubles.

Useful devices

Helpers who make life easier for housewives and save them from the need to risk their lives are not a luxury, but a necessity in every home.

Mop with telescopic handle

An indispensable assistant in hard-to-reach places. The set includes a handle and two nozzles: with a sponge for cleaning glass and a rubber one for removing water.

The advantages of the device are light weight and adjustable handle length. You may not be able to clean the window flawlessly the first time; certain skills are required. You need to work with smooth movements from top to bottom.

The main criterion for selection is the length of the handle, it should be more than 2 m. The optimal height is the double-glazed window plus 50 cm.

Magnetic brush

The device consists of two identical parts covered with a sponge and a magnet, which allows you to hold the two halves in the same position.

Principle of operation:

• dip the sponges into the prepared soap solution;
• put the cord of the device on your hand to hold the brush in case of a fall;
• place one part on the outside of the glass, the second on the inside;
• start moving the inner half from the edge of the glass to the center, the outer one will exactly repeat the movements.

Scraper (rubber tie)

Another name for a brush is water brush.. A rubber nozzle 20-60 cm wide fits tightly to the glass and forces moisture to escape in the direction of movement. The recommended direction is from top to bottom; the scraper is ineffective if the movement is chaotic.

When choosing, they are guided by the width of the nozzle, which depends on the width of the windows that will be processed with it.

Steam cleaner

A universal device with a working principle similar to an iron. Water is poured into the device, brought to a boil, and an air stream saturated with steam comes out under pressure.

Guarantees deep cleansing of all types of contaminants. The powerful air flow and temperature will clean not only windows, but any surface.

The window must first be prepared: clean the frame, remove excess moisture. After this, moving from top to bottom, the glass is treated with steam. The advantage is 100% cleansing results even in hard-to-reach places.

When choosing, you need to pay attention to weight and size, the device should be comfortable to hold in your hands. It is better to trust well-known manufacturers.

Do not fill the device with ordinary water. Boiled and filtered is required. The best option is distilled.

Cleaning individual parts

It is important not only to clean the profile, but also to pay attention to individual parts of the structure.

Drainage holes must be cleared of dirt and dust; their clogging can lead to glass freezing in winter. Wipe locks and hinges with a damp cloth and remove moisture with a napkin. Events are held twice a year.

Mosquito net

It is better to wash the structure in the bathroom:

1. The mesh should be rinsed with a shower head to remove the main dirt.
2. Prepare a solution of ammonia and water (1:3).
3. Treat the surface with it using a medium-hard brush.
4. Shake off excess liquid.
5. Remove residues with a dry, lint-free cloth.

To clean small everyday dirt on the mosquito net (dust, various particles), you can use a sticky roller to clean clothes.

This video will show you how to wash a mosquito net:

Slopes

Plastic slopes are treated like a profile. If there is no special detergent, You can use a soap solution combined with microfiber cloths.

No mechanical influences, abrasives or aggressive substances. To prevent the formation of condensation, it is necessary to treat the surface with a solution of glycerin and alcohol in a ratio of 1:20.

Windowsill

The window sill is more likely to be heavily soiled and spots of various origins. If the stains are fresh, a soap solution will help.

To enhance the effect, soap can be replaced with a few drops of dishwashing detergent. Adding alcohol and vinegar gives good results.

Industrial plastic cleaners in spray form work well., but require compliance with safety measures in operation. The right choice of rags is also important - soft sponges and microfiber cloths are ideal.

The dirtiest places on the window sill are the cracks under the frame. You can clean them with a toothbrush.

Complex contaminants

Sometimes specific contaminants form on the profile and glass that a regular solution cannot cope with. How to deal with each of them is described in the table:

During repairs, it is advisable to cover the window with film to avoid contact with building solutions.It is not recommended to clean complex stains on plastic with a melamine sponge. It is effective, but creates microdamages on the surface.

Price of service in cleaning companies

Professionals offer step-by-step window cleaning, which includes washing:

• frame;
• slopes;
• window sills;
• glass

Prices for services are calculated based on:

1. Surface areas.
2. Type of cleaning.
3. Use of special equipment.
4. Cost of consumables.
5. Deadline for completing work.
6. Additional services.

Advice from professionals

Durable PVC profile is not afraid of temperature changes and any weather conditions. But an incorrectly selected product can cause irreparable damage to the surface.

To avoid mechanical damage and dissolution of stabilizer substances, the profile surface You cannot use products that contain:

• abrasive particles;
• acids;
• solvent;
• petrol;
• chlorine.

In addition, hard brushes, metal jaws and scrapers can damage the surface of the profile.

Taking care of surfaces Don't forget about your own safety:

1. Protect the skin of your hands with rubber gloves.
2. Respiratory tract with a respirator (especially when working with ammonia-based solutions).
3. Do not stand on the windowsill; it is better to use a stable stool or stepladder.

You will find a lot of important and useful information about fast and effective window cleaning in this section.

Video on the topic of the article

The video will show you how to wash plastic windows and remove yellow stains from them:

Conclusion

The shining cleanliness of plastic windows can only be guaranteed by following the manufacturer’s recommendations for care and use.The use of gentle detergents, soft wipes and sponges, and preventive measures are what will extend the life of the structure and keep it in perfect condition.