Simple instructions on how to wash mosquito nets on plastic windows

foto27103-1A mosquito net reliably protects your home from insects, but does not impede the flow of fresh air.

However, a dirty damper is a source of dust and allergens.

Read the article about how to remove the mesh on plastic windows and what products are best to wash it with.

How to remove it from the frame?

To wash the mosquito net, you need to remove it from the fastenings. It's easy to do:

  1. foto27103-2It is necessary to remove pots and other objects that may interfere with the windowsill.
  2. With your fingers you need to grab the ears that are on all mosquitoes.
  3. Holding them, the structure is lifted up so that it comes out of the lower grooves.
  4. The bottom of the canvas is directed towards the street, but you should not lean out of the window too much.
  5. Then you need to lower the mesh down so that it comes out of the upper brackets.
  6. All that remains is to turn the net upside down and bring it into the apartment.

If the grid is attached to flags, then to gain access to them you need to open a second window and turn them to the side. When fixing the product on plungers or hooks, you will need to loosen their fastening.



The video will show you how to remove a mosquito net:

Folk remedies

To get rid of accumulated dirt, it is not necessary to purchase expensive compounds. You can wash the mesh using folk remedies.

Ammonia

If the product is very dirty, it is recommended to use ammonia.

foto27103-3Procedure:

  • pour warm water into a basin;
  • add ammonia to it in a ratio of 1:3 and mix;
  • rinse the mesh under running water;
  • dip the brush into the prepared solution, clean the mosquito on both sides, pay special attention to stubborn dirt;
  • Rinse the product in clean water, let it drain, and wipe with a dry cloth.

Lemon juice

Lemon juice works well for stubborn stains. Moreover, it is absolutely harmless to the material from which the mesh is made. To prepare the solution you will need 1 liter of water and the juice of one lemon.

The procedure is as follows:

  1. Rinse the mesh under the shower.
  2. Pour the solution into a spray bottle.
  3. Moisten the surface to be treated.
  4. Leave to act for 10 minutes.
  5. Rub the mesh with a brush, rinse with clean water, and dry.

Baking soda solution

You can use a baking soda solution to remove dust and dirt. To prepare it, dissolve 1-2 tablespoons of soda in 1 liter of water.

Instructions for use:

  • moisten a brush with soft bristles in a soda solution;
  • with its help, apply the product to the surface that needs cleaning;
  • leave for 5-10 minutes;
  • wash off the composition with clean water, especially contaminated areas are additionally cleaned.
When brushing the surface, do not press too hard on it. Applying excessive force will cause the material to stretch and bumps will appear on it. They look unsightly and have a negative impact on air circulation.

Household chemicals

You can get rid of dirt on the mesh using household chemicals. Top 3 inexpensive and effective remedies:

  1. foto27103-4Dishwashing liquid. It needs to be diluted in warm water and whipped until foam forms. The mesh is placed vertically in the bath at a slight angle. The solution is applied to it with a brush, left for 15 minutes, after which they pass over the surface of the product again. Wash off dirt and foam with a shower.
  2. Liquid soap. It is used in a similar way to dishwashing detergent.
  3. Washing powder. Before use, it must be thoroughly dissolved so that no visible granules remain in the basin. It is best to use hand washing powder that does not contain bleach.

If the mesh has not been washed for several seasons and is very dirty, it needs to be soaked. To do this, take a full bath of water and immerse the product in it. To prevent it from floating, place a small weight on top, for example, a towel. After 15 minutes, wash the frame using the selected product.

When starting cleaning, you need to be prepared for the fact that After getting wet, the product will emit an unpleasant odor. Therefore, it is better for people suffering from allergies to ask their household for help.


How to clean a mosquito net, video instructions:

How often should you wash?

The mesh must be washed as it becomes dirty. If a person suffers from allergies, then rinse it at least once a week.

You should take care of the product with the same frequency if you live near highways or objects under construction. There is no need to use chemicals every time. It is enough to rinse the frame with running water.

If the windows overlook a park or other dust-free landscape, then you can wash the mesh once every 2-3 months.

However, if it comes into contact with visible contamination, such as bird excrement or insect excrement, cleaning should be carried out immediately. Such substances are very caustic, and therefore can lead to the destruction of fibers and their burnout.

Possible mistakes

If you wash the mesh incorrectly, it will quickly become unusable, but with the right approach, the product will last at least 8 years.

Mistakes to avoid:

  1. foto27103-5Aggressive compounds should not be used.They negatively affect the strength of the fibers, which will quickly collapse under the influence of the scorching sun and rain.
  2. It is not recommended to use vinegar. It is especially dangerous to use the essence.
  3. There is no need to wash the mesh with sponges or lint rags. Small particles will settle in the cells and prevent air flow from entering the room (more dust and allergens always settle on the fabric).
  4. When choosing a brush for cleaning mosquitoes, preference should be given to products with soft bristles. Metal brushes should not be used.
  5. The stream of water from the shower should be directed at an angle of 30-45 degrees. If you pour water directly, the mesh will stretch.

When using detergents, you need to take care of the safety of the skin of your hands by protecting them with rubber gloves.

Helpful information

Care Tips behind the mosquito net:

  • You need to remove the mesh in dry, windless weather, because... gusts of wind can tear it out of your hands and cause it to fall;
  • when removing the mesh, you should not lean on it - the structure will not be able to support the weight of a person;
  • You cannot put too much pressure on the mesh so as not to tear it.
If the product is not heavily soiled, you can clean it using the dry method. A vacuum cleaner is used for this, but only equipment whose power can be adjusted manually is suitable.

The choice is made in favor of a nozzle with a textile spout. The power should be set to minimum.

The frame is placed on a towel or other material of a suitable size and carefully passed over its surface with a vacuum cleaner. This cleaning will get rid of loose dirt.:

  • from dust,
  • cobwebs,
  • plant pollen.

It is recommended to vacuum the mesh on both sides.

You will find a lot of important and useful information about fast and effective window cleaning in this section.

Conclusion

The mesh on plastic windows needs to be washed regularly. This procedure does not take more than 10 minutes. No special compounds are required to care for the product. You can choose from both folk remedies and household chemicals, which are found in every home.

Discussions

How to remove odor

Scratches

Yellow spots