Proven means to remove liquid nails from plastic without damaging it

Liquid nails are used everywhere. No repair can be done without them.

If handled carelessly, they can end up on a surface where they shouldn't be.

Read the article about how you can remove liquid nails from plastic and how to do it without damaging it.

Preparation

Before you begin the process of removing liquid nails from plastic, You must ensure that you have the following tools:

• spatula, screwdriver or spatula for removing frozen mass;
• a bowl of clean water;
• rags or cotton pads;
• means for basic processing.

Before cleaning with the selected solvent, the stain must be lifted. This is done as follows:

1. Cut steel wire 1 m or less in size (depending on the area of ​​the spot).
2. They bring it under the frozen composition.
3. By making back-and-forth movements, the stain is removed.
4. If it is difficult to cut, use a screwdriver, lifting the liquid nails upward and bringing the wire deeper under them.

After the bulk has been removed, the final cleaning begins.

How to clean a plastic surface?

Let's look at the means by which you can remove liquid nails from plastic:

Dimexide

You can clean plastic from liquid nails using Dimexide. This product is sold in pharmacies in the form of a solution..

For medicinal purposes, it is used in diluted form as an anti-inflammatory drug.However, at a concentration of 99%, it acts as a powerful solvent with which you can easily remove liquid nails.

Procedure:

• clean off excess hardened foam so as not to damage the base;
• apply Dimexide to a rag or sponge;
• soak the stain, leave for 5 minutes;
• remove remaining nails with a scraper;
• Wash the treated area with clean water.

Dimexide should not be left on the surface of the plastic for longer than 5 minutes. This substance is quite caustic, so it can damage the product.

Solvents

You can quickly deal with liquid nails using a solvent. You can choose from acetone, white spirit, solvent 646 or gasoline.

Mode of application:

1. Cut off the protruding part using a spatula.
2. Moisten a clean cloth generously with solvent.
3. Wipe the stain with it. If it comes off with difficulty, you can leave the solvent on the plastic for 5-10 minutes, carefully monitoring its reaction.
4. Remove softened liquid nails with a hard object.
5. Wash the area with clean soapy water.

How to remove with vinegar?

If the stain is not old, then you can use table vinegar to combat it. It is used undiluted.

Procedure:

• moisten a clean white cloth generously with vinegar;
• apply it to the surface of the stain, leave for 30 minutes as a compress;
• Using a wooden scraper, remove the softened compound from the surface to be treated.

If small particles of the adhesive mass do not want to separate from the plastic, use a soap solution. It is applied for 20 minutes, after which the cleaning is completed.This two-stage treatment allows you to completely get rid of contamination.

Fats

You can remove the frozen mass using a fat-containing composition, for example, Vaseline or vegetable oil. These remedies will only be effective if the stain is fresh.

Mode of application:

1. A cotton pad or rag is soaked in oil.
2. Apply it as a compress to the stain.
3. Leave on the surface for half an hour.
4. Remove any remaining product with a soap solution and then with clean water.

Helpful information

Cleansing Tips plastic from liquid nails:

1. You can only work with chemicals wearing gloves. Contact of caustic components with skin or mucous membranes is unacceptable. If this happens, you need to rinse the area with clean water.
2. Before you begin full cleaning, you need to test the selected composition on an inconspicuous area. If the plastic reacts normally to the substance and does not change its original characteristics, processing can begin.
3. For work, you can only use a white cloth, clean cotton pads or a bandage folded in several layers. The use of dyed rags may cause the pigment from the fabric to transfer to the plastic product and be absorbed into its porous surface, which will require additional processing.
4. You can only scrub the stain from the edge to the center. Ignoring this rule will result in liquid nails transferring to the clean surface.
5. You need to start processing as soon as possible after liquid nails get on the plastic. This will allow you to deal with the problem without much effort.
6. It is unacceptable to use sharp objects that can leave deep scratches.If a spatula is used to remove the frozen mass, then it is recommended to give preference to plastic or wooden products. Nails are not removed with the angle of the tool.
7. Removal of the frozen mass is carried out layer by layer, without trying to remove it completely at one time. Otherwise, the base may be seriously damaged.

Conclusion

Liquid nails adhere strongly to the surface, so removing them will require some effort. For this purpose, both aggressive compounds in the form of Dimexide and acetone, and fat-containing liquids - vegetable oil and petroleum jelly - are used.

When using solvents, you must follow the instructionsso as not to damage the plastic base and harm your health.