What should I do if my LG washing machine vibrates strongly during the spin cycle?

foto36208-1 The strong vibration of the LG washing machine during the spin cycle is in most cases an abnormal situation.

Significant noise during operation of the washing machine and vigorous shaking of the device are not only annoying, but can also harm the components in the device itself.

To eliminate a defect, you can first analyze the situation and eliminate possible user errors.

Why does the LG washing machine vibrate during the spin cycle? We will tell you further whether and how this situation can be corrected.

Content

Should the washing machine vibrate? In what cases is this normal?
Causes of the problem and their solution
Call the master
Conclusion

Should the washing machine vibrate? In what cases is this normal?

If your LG machine suddenly begins to vibrate strongly during the spin cycle, you need to analyze the correct installation and make sure that user errors are not involved in the shaking.

A slight uniform vibration during the spin cycle with a high number of revolutions is a normal situation for belt-driven machines.

Transport bolts

If the LG machine is only installed after transportation, then there is a possibility that the transport bolts were not removed. The problem can be solved simply - the bolts are removed from the rear wall and kept just in case.

Smooth or uneven floor

A floor that is too smooth or glossy can cause vibration if the machine's feet slip and the machine moves freely on the floor.With this movement, the tank and drum receive an increased load. The solution to the problem is to place special pads under the legs of the LG or install a special mat.

If the floor is uneven, there will definitely be vibration. With this installation, the washing machine begins to vibrate strongly and even jump. The solution to the problem is leveling the floor or installing a podium under the washing machine, which will make it possible to position the machine on a level.

How to deal with vibration, if the problem is not a device failure, can be seen in the video:

Imbalance of things

If things get lumped together during washing, the LG washing machine is not always able to distribute them evenly. As a result, when spinning a wad of laundry hits the drum hard, and this causes vibration.

To prevent this situation, it is advisable to use special bags for washing clothes. And if there is already a clump of things, you should stop the washing machine and try to sort out the laundry.

Overload

If the LG machine is overloaded, wet heavy laundry during spinning creates a significant load on the components and mechanisms. A drum that accelerates to high speeds cannot distribute the entire large volume of laundry, which hits the walls and causes vibration.

Causes of the problem and their solution

If, upon inspection of the LG washing machine, no obvious causes of vibration are identified, you need to move on to analyzing the states of the components that can cause the body to shake during spinning.

Bearing failure

foto36208-2 Over time, especially when located in a damp room, and with frequent exposure to moisture, the bearings of the LG washing machine are destroyed.

The first signs of a defect in this unit may be a grinding noise., which accompanies spinning and then washing.At the same time, the shaft receives free lateral movement, which leads to vibration of the washing machine.

You should not use the LG washing machine if there is a suspicion that the bearings are worn out. If the failure worsens and the bearing falls apart, various components may be damaged, which will complicate the repair and make it even more expensive.

There can only be one solution to the problem - replacing the bearings. DIY guide for replacing the bearing in an LG washing machine - Here.

The counterweight mounts are loose

There is a counterweight on top of the tank. At its core, it is a heavy block that ensures the stability of the washing machine and also stabilizes the position of the tank relative to the body of the LG washing machine.

Over time, the counterweight may begin to deteriorate, and then it is replaced. But more often there is loosening of its fastening. During operation, a knocking noise may be heard and vibration increases. At the repair stage, the fasteners of the part are restored or replaced.

Physical wear of shock absorbers

According to statistics, it is dampers that have become unusable that most often become the cause of vibrations. Shock absorbers, which are located under the tank, are designed to dampen vibrations that occur at high speeds, characteristic of spinning.

The longer an LG washing machine lasts, the more the dampers wear out. Washing in violation of the rules further aggravates the situation and accelerates wear and tear - overloading the drum, setting the spin cycle when processing sports shoes, etc.

If the shock absorbers are not in order, the washing machine can signal a breakdown not only by vibration, but also by a knock during the spin phase - the drum hitting the body. Only replacing the dampers will solve the problem. Dampers are replaced only in pairs, both at the same time.

Instructions for replacing shock absorbers on an LG washing machine with your own hands - here.

The video will tell you what else you can do with the shock absorbers of a “jumping” car:

The springs holding the tank are worn out

Springs work in conjunction with dampers to stabilize the position of the tank during intense rotation. They are located above the tank and partially dampen its vibrations. With a long service life, especially if users frequently violate the operating rules of the equipment, the springs begin to lose their rigidity.

Deprived of the necessary elasticity, they cease to dampen the oscillatory movements of the tank during spinning, and vibration appears. Repair for such a breakdown - replacement of both springs.

The motor is broken

If the motor does not operate stably, jerkily, then vibration may be created. High-quality spinning does not occur under such conditions.

To restore normal operation of the washing machine, most often it is necessary to replace the motor. How to determine the malfunction of the LG washing machine motor and replace it, will tell you this article.

Stretched belt

During operation of an LG belt drive washing machine The drive belt may stretch. As a result, the rotation from the motor to the drum is transmitted unevenly - in jerks, which causes vibration and shaking of the entire body of the washing machine. For machines with direct drive, there cannot be such a reason for vibration.

Call the master

If you cannot find the reason for the vibration of the LG washing machine during the spin cycle on your own, you need to call a technician from a household appliance repair company. The easiest way to find such a company is on the Internet.

You should pay attention to whether there are positive reviews about the company’s workHow long has it been on the market? This thoughtful approach will help you avoid falling for scammers.

foto36208-3 The cost of repair work in different companies can vary significantly. The amount of payment depends not only on the region, but also on the pricing policy of the company itself, the complexity and labor intensity of the repair work.

On average in the capital, the price will start from the following amounts:

replacement of bearings - about 4,500 rubles;
replacement of shock absorbers - about 3,000 rubles;
replacement of an electric motor – from 2600 rubles, etc.

The cost of spare parts is paid separately by the client.

Conclusion

If your LG washing machine vibrates during the spin cycle, it may be a sign of a serious problem. This situation should not be ignored.

If the machine has been installed according to all the rules and is used carefully, you need to find the node that gives such a failure and carry out repairs. If you have specialized knowledge, you can do this on your own; in other cases, you will need the help of a specialist.