What to do if your LG washing machine shows an OE error?

Modern washing machines are equipped with artificial intelligence. He can not only monitor the operation of the device, but also notify the owner of the household appliance about problems that have occurred.

If there is a breakdown, a letter code appears on the screen, which makes it easier to find the fault.

The article will talk about how the OE error in an LG washing machine is deciphered, how to understand what caused it and how to eliminate it.

What does the code that the LG washing machine produces mean?

OE error in LG washing machine - what is it? Most often, the code appears some time after starting the wash. In this case, the drum stops rotating. It stops filled with water. The OE code may also appear on the display when the laundry is rinsing.

Cars without a display can also signal an OE error, but this manifests itself in a different way. Two possible options:

1. All rinse indicators flash and light up at the same time.
2. At the same time, the spin indicators 800 rpm, 500 rpm and “No spin” light up and flash.

Decoding

The OE code indicates that the washing machine is unable to drain water from the tank.

A certain amount of time is allocated for this task. It ranges from 5 to 8 minutes. This time varies for different models of washing machines.

If the fluid remains in the drum, then there has been a breakdown or some other problem that will be indicated by an OE code. It is necessary to understand the reasons and eliminate them.

Reasons, how to fix the problem?

There are several reasons why the OE code appears in a LV washing machine. Some of them are easy to fix on your own. For more labor-intensive repairs, the help of a specialist will be required..

Clogged drain hose or filter

After washing, the water will not drain if a blockage has formed in the pipe leading to the sewer system.

To solve the problem, you need to clean the drain system. Proceed as follows:

1. Clean the drain pump filter. It is located at the bottom of the device, closer to the left edge. The water supply must be shut off or forcibly drained. The filter can be seen under the false panel, behind the door. It is inserted into the pump chamber and looks like a large plug with a projection. It must be unscrewed, large debris removed by hand, and then rinsed under running water.
2. Clean the drain hose. To cope with this task, the hose will have to be disconnected. To do this, you will need to disassemble the back wall of the washing machine and disconnect the hose from the pump. When it is removed from the device, it is washed under running hot water.
3. Clean the siphon and the connection between the hose and it.

When all the elements are cleaned, you can try to put the washing machine back into operation.

The sewer system is clogged

Sometimes the washing machine cannot drain water due to a clog in the sewer system. The water flows through the hose and stops. This causes the OE error to appear.

It is not difficult to cope with the problem on your own. Proceed as follows:

• disconnect the hose from the drain - if there is a blockage in it, clean it too;
• pour a household pipe cleaner into the hole; alternatively, you can use folk remedies;
• if the blockage is hard and cannot be dissolved with chemicals, use a plumbing cable.

When the plug is removed, you need to insert the hose into place and continue to use the washing machine as usual.

Drain pump malfunction

The OE error code in an LG washing machine may appear due to a broken drain pump. In this case, the drain will not work at all while the wash starts. The pump must be checked for functionality and then repaired or replaced.

Procedure:

1. Drain excess water through the emergency hose.
2. Place the washing machine on its left side.
3. Twist the bottom.
4. Unscrew the screws and loosen the pump clamps, remove the pipes and wires leading to it.
5. When the pump is freed of everything unnecessary, it can be removed.

Damage to the water level sensor

If the cause of the OE error appears due to a broken pressure switch, the washing machine will stop while the program is running. After manually draining the water, it will not be possible to put the device back into operation. The machine simply will not take in liquid.

A breakdown of the pressure switch means that the control board does not receive a signal about how much water is in the drum. She cannot carry out further actions, which is why she sends the corresponding code to the screen. To cope with the problem, the water level sensor must be assessed for performance and, if faulty, replaced.

Procedure:

• remove the top cover from the washing machine;
• twist the pressure switch that is located under it;
• inspect its tube for blockages, and the lamellas for the presence of oxidized areas;
• blow out the hose leading to the pressure switch - if there is no click, the part is faulty.

A broken water pressure sensor cannot be repaired; it must be replaced with a new part.

Control module failure

If the control unit fails, the machine will display an OE error and will not drain water. In such a situation, there is a high probability that certain elements on the microcircuit that are responsible for controlling the drain have overheated.

Disassembling the washing machine, removing the control module and repairing it will help correct the situation. To cope with this task, you need to understand electronics, otherwise you can provoke the final breakdown of an expensive part.

Call the master

If you are unable to resolve the OE error yourself, you need to contact a specialist. You can find a specialist through advertisements posted on the Internet or in the newspaper. In addition to individuals, service centers offer their services. Provided that the washing machine is under warranty, it will be repaired free of charge.

The cost of repair depends on its complexity, as well as on the pricing policy of a particular employee. Approximate prices:

1. Cleaning the hose and filter – 1400 rubles.
2. Drain pump repair – from 2100 rubles.
3. Pressostat repair – from 2100 rubles.
4. Repair of the control module – from 2600 rubles.

To minimize the risk of encountering scammers, it is better to contact trusted professionals whose services have been used by relatives or friends.

Preventing the problem from recurring

To prevent the OE error from appearing in the future, The following recommendations must be followed:

• use the machine according to the instructions;
• avoid interruptions in the network;
• periodically clean the drain hose and filters;
• check pockets for small items;
• load items with tightly sewn buttons into the machine - they need to be fastened before washing.

Helpful information

Tips that will be useful To all owners of LG washing machines:

1. When screwing in the filter after cleaning, you need to make sure that the part fits straight. Shift along the threads will lead to leaks.
2. If the filter does not unscrew, you can use pliers, but be very careful.
3. When starting to check details, you need to adhere to the principle from simple to complex. First, check the filter, then the hose, then the pump and pressure switch. Lastly, the control board is inspected.
4. The drain pump does not always need to be thrown away. Sometimes, to restore functionality, it is enough to clean it from dirt and replace the gasket, as well as lubricate the bearings.
5. You can tell that the machine is not draining water if the device is too quiet. If the pump is faulty, it will not make any sounds characteristic of pumping water.

You will find a lot of important and useful information about error codes for LG washing machines in this section.

Video on the topic of the article

What does the OE error on an LG washing machine mean and how to fix it, video instructions:

Conclusion

The OE error does not always indicate a serious breakdown. Perhaps the problem lies in a normal blockage that you can clear yourself. It is better to entrust complex repairs to a specialist.