Why does the LG washing machine not turn on, what should I do?
An LG washing machine may suddenly present a “surprise” and refuse to turn on. There are many reasons why the device does not start working.
It is better to start checking the condition of equipment with the most accessible and simple components, gradually moving on to more complex ones.
Why the LG washing machine does not turn on, how to find the problem and fix it, we will tell you further.
Content
Possible reasons for refusing to work
The very fact of a malfunction is determined very easily - the washing machine simply does not start working. The reasons for LG failure are not always related to the internal structure of the device. Very often they turn out to be external.
Reasons why the washing machine may not turn on:
No electricity supply to the device.- The washing machine power button is faulty.
- Control module failure.
- Damage to the electrical wiring inside the machine.
- Interference filter functionality is impaired.
- No door lock.
The simplest analysis and troubleshooting can be done independently. If the solution to the problem is not obvious, and there is no special knowledge on repairing electrical equipment, you may need the help of a specialist.
Where to begin?
If the LG washing machine did not turn on - it did not emit any signals, and the indicators and display did not light up, you should start checking from the simplest points.
First you need to make sure that there is electricity in the apartment.After this, you should inspect the cord itself and check how well the plug is inserted into the socket. The plug and cord should not be damaged, and the socket should not be scorched.
The cord should be smooth, without bends or creases. Strong bends can render it unusable. If the display on your LG washing machine lights up when you turn it on, you need to make sure that there is no error code on it. Very often the machine itself tells you what exactly the problem is.
If at first glance no defects are found, you should proceed to analysis and diagnostics of the internal structure washing machine.
Diagnostics and repair of LG washing machines
If the fault cannot be quickly identified, you will need to partially disassemble the LG washing machine in order to gain access to the components that may fail in this case.
Before opening the case or even partially disassembling the device, it should be disconnected from communications - electricity and water supply. For new equipment that is under warranty, this option is not suitable - you need to call a technician from the service center.
Interference filter malfunction
An interference filter is a device that serves to dampen electromagnetic waves that can interfere with the operation of devices in the house - a TV, radio, computer, etc.
In case of breakdown and failure, the FPS stops passing current through itself. As a result, the entire washing machine does not turn on.
You can check the condition of the interference filter using a multimeter.To do this you need to gain access to the part.
Procedure:
- remove the top cover from the washing machine;
- determine the location of the interference filter;
- check the external condition and functionality of the FPS.
A noise filter is an element of an electrical circuit. There are 3 wires going to its input, and 2 going out. In the case when there is voltage at the input, but there is none at the output, we can talk about a malfunction of the unit. The solution to the problem is to replace the part.
Power button failure
This type of breakdown is one of the easiest to fix.. To diagnose the condition of a part, you need to gain access to it. This is done with the panel removed.
To analyze the condition of the part, you should use a multimeter. Replacing the power button is quite simple and relatively inexpensive.
Problems with the control module
Diagnostics and repair of the LG control module, and even more so its replacement, is a complex task that only a specialist can handle. To carry out diagnostics and repairs, you need to call a specialist.
If this unit breaks down, almost any error codes may appear on the display or none at all. If a module needs to be replaced, it will be very expensive..
The video will tell you about repairing the control unit:
The door lock is broken
In the case when the washing machine seems to have turned on, but the work has not started, you should pay attention to the hatch door. The door lock is responsible for holding the hatch door closed during washing.
If there is a failure, the error code DE may appear on the display. When the door is locked, the corresponding icon lights up on the display during washing.
Wiring problems
If the electrical wiring is damaged, the LG washing machine will not function normally.
Depending on the breakdown, work may either be unstable or not even start. Due to poor power supply, the indicators may not light up or flash randomly when turned on.
To fix this problem, you should partially disassemble the washing machine and diagnose the entire electrical circuit.
If a problem area is detected, the wiring is replaced. In the process of analyzing the state of the electrical circuit, it is necessary to pay attention to the reliability of the contacts.
Call the master
In the event that it is not possible to get the washing machine working or there is no free time for it, you should call a specialist from a repair company washing machines. You can find a similar company on the Internet by narrowing your search terms to your city.
When choosing a company to contact, preference should be given to companies that have been operating on the market for a long time and have good reviews. A reliable reputation serves as protection from scammers and unskilled craftsmen.
Prices for services vary by region and locality. The average prices in the capital are as follows:
- replacement of the power button – from 1,300 rubles;
- replacement of the hatch locking device – from RUB 1,700;
- replacement of the control unit – from 2,600 rubles;
- replacement of electrical wiring harness – from RUB 2,000. etc.
Prevention measures
To maintain the performance of your LG washing machine, it is important to comply with all operating conditions. Preventive measures include the following:
A separate outlet must be provided to turn on the washing machine.- If there are power surges in the house, connecting the washing appliance can only be done through a stabilizer.
Otherwise, there is a possibility of damage to the wiring, burnout of the control module and other components.
- Do not allow water to get on the interference filter, control unit or other parts.
- The power button should not be pressed forcefully.
- Wiring should be kept away from pets and rodents.
- When storing laundry, you should check that foreign objects do not fall between the hatch door and the cuff, including in the area where the lock is located.
- The washing machine must be located in a place with good ventilation so that corrosive processes cannot harm the components of the device.
In case of unstable operation of the washing machine, it is necessary to carry out diagnostics without waiting for a serious breakdown.
Conclusion
If your LG washing machine does not turn on, there may be different reasons for the failure. You can deal with some problems on your own, and to eliminate serious damage you may need the help of a specialist.
