Simple instructions on how to clean the drain filter in an Electrolux washing machine

Caring for your washing machine includes mandatory periodic cleaning of the drain filter.

This part is designed to hold small debris that accidentally gets into the drum with laundry and prevent damage to the drain pump.

We will tell you below how to clean the filter in an Electrolux washing machine with vertical and horizontal loading.

Cleaning frequency: more often or less often?

The drain filter is an important part of the design of an Electrolux washing machine. It is designed to catch small debris and foreign objects that have fallen into the drum. If cleaning is not carried out on time, the part gradually becomes clogged with layers of debris and mucus, which leads to problems with the operation of the washing machine.

But there are situations when Electrolux cleaning has to be carried out unscheduled. These include:

1. Problem with draining (it is slow or water does not leave the tank at all).
2. Water leakage from the side of the housing where the drain is located.
3. Washing of items with a large number of pills or lint.
4. Unpleasant odor inside the drum.
5. After washing, it was discovered that the down jacket or pillow was torn and the filling got into the drum and tank, etc.

If cleaning is not carried out regularly, as prescribed by the equipment manufacturer's instructions, The following violations are possible:

• mold development;
• unpleasant odor from the drum and from already washed clothes;
• deterioration of water drainage, up to its complete blocking;
• damage to the pump and, as a result, more expensive repairs with replacement of parts.

If washing is done frequently, dirt will form faster. The following circumstances also contribute to blockage:

1. Washing items with lint and pellets.
2. Damaged items (dangling threads, torn lining, poorly sewn buttons, etc.).
3. Presence of pets with fur in the house.

Where is the part located in the Electrolux washing machine?

The drain filter in each Electrolux automatic washing machine can be located differently, depending on the model. In washing machines with horizontal loading, access to it is located below, on the front side behind the panel. In top-loading machines, access is through the drum.

Preparation for the process

In order to clean, preparation required:

• disconnecting the device from communications;
• freeing the drum from things;
• draining water from the tank.

If you cannot drain the water from a front-loading Electrolux washing machine by selecting the required mode, you can drain it through the filter itself. But in this case, the liquid will simply spill out onto the floor in front of the device. To prevent flooding, it is necessary to prepare rags and low containers in advance.

Work algorithm

Depending on the model of your washing machine, you can clean the filter yourself. The procedure is determined by the model of the washing machine.

Front loading

Once the preparatory steps have been completed, you can proceed to cleaning. You need to act according to the algorithm:

1. Move a low bowl under the location of the Electrolux filter and place some rags.
2. Open the hatch blocking access to the part.
3. Remove the part by carefully turning the handle. As you turn, water will begin to flow out. You need to take the part out slowly.
4. After the water has stopped flowing out, you can pull out the entire part.
5. Clean it from large fractions of debris using a sponge and brush.
6. Wash the part in warm water (not boiling water) using a small brush or sponge. Aggressive detergents should not be used.
7. Before installing the removed part back, you need to inspect the seat to make sure there is no debris there. If necessary, clean carefully using a cloth. Near the filter there is a pump, which is responsible for pumping water. If the impeller blades do not rotate freely, then the blockage is more serious and the pump also needs to be cleaned. It is more convenient to carry out such work when partially disassembling the washing machine.
8. If cleaning has been done, install the cleaned part in its original place so that the thread fits in easily, without distortion.

When tightening the plug, it is necessary to install it tightly, but without allowing the threads to twist. Schematic execution of work:

Upper

In Electrolux top-loading washing machines, the drain filter can be accessed through the drum. The part itself is different in appearance from those used in front-loading machines. Scheme of work:

System health check

After cleaning the Electrolux filter, you need to test the operation of the device to make sure there are no leaks.

1. Open the water supply tap.
2. Insert the plug into the socket.
3. Set a short operating cycle, monitoring the behavior of the washing machine for leaks.
4. If trickles of water appear from under the panel, it is necessary to reinstall it.

Possible problems and ways to solve them

When cleaning the Electrolux filter, you may encounter some problems. Depending on their complexity, it is possible to cope with them on your own, but sometimes they will require the help of a specialist.

What to choose: clean it yourself or call a professional?

Regular cleaning of the Electrolux filter, which is carried out on time, is usually not difficult and can be done on your own.

On average, in the capital, cleaning the drain filter will cost 1,000 rubles. If there are other faults that need to be fixed, the price will be higher.Also, the cost will be affected by the need to partially disassemble the device if the filter cannot be unscrewed.

Video on the topic of the article

You can watch the video to find out how to find the filter, clean it and install it in place:

Conclusion

It is quite possible to clean the drain filter in an Electrolux washing machine yourself. This action is a mandatory preventive measure that should not be neglected. If you cannot cope with the situation on your own, or the machine is malfunctioning, you will need the help of a professional.