General rules and principles for ironing curtains made of various materials
Curtains are a beautiful, but very delicate element of the interior. As a rule, they are sewn from thin, light and delicate fabrics that require careful and competent care.
It is important for every housewife that the curtains are clean and perfectly straight without creases. But maintaining a presentable appearance is not easy.
Difficulties in care are associated with compliance with a special washing, spinning and labor-intensive ironing process.
To iron products and not spoil the material, you need to know a few important rules and simple tricks. Read the article on how to quickly iron curtains.
Content
Ironing
Whatever the curtains are: small or large, this does not really affect the care. Of course, it’s easier to handle small canvases, but there won’t be any particular difficulties with long ones either.
Process Features ironing curtains:
- To process products, you first need to prepare a workplace.
- There should be enough free space around the ironing board (or table). This will allow you to move freely without stepping on the fabric.
- In front of the ironing board, you can place several chairs or a table on which the ironed fabrics will be laid.
- First of all, you need to smooth out the frills and edging.
- If there is embroidery or embossing, it should be slightly moistened and ironed from the wrong side, pressing the iron well to the surface.
- You need to start ironing the curtain from its top, carefully and consistently moving down.
- You should not hold the iron in one place for a long time to avoid overheating of the material and possible unpleasant consequences: stains, scorches, melting of fabric fibers.
When ironing curtains you need to know the type of fabric, what temperature conditions are recommended for it, whether steam treatment is acceptable or not. After all, if the material is damaged in a small area, the entire product will become unusable.
Material | Temperature | Peculiarities |
Cotton, linen | 140 – 180 °C | For a high-quality result, it is recommended to moisten the fabric (spray from a spray bottle) and create strong steam. The iron is pressed against the surface with force. |
Silk | 80°С – 100°С | The fabric is ironed through a thin cloth (not gauze) or from the wrong side. Silk cannot be moistened or steamed. |
Chiffon, organza | 60°С – 80°С | Iron through damp gauze or cloth, without steam or moisture, at minimum temperatures. The soleplate of the iron must be perfectly clean. |
Polyester, nylon | 60°С | Iron very carefully, without iron pressure. Humidification or steam formation is excluded. |
Nylon | minimum | Most often, ironing is not required after washing. Treat with steam if necessary. In extreme cases, it can be easily ironed at a minimum temperature. |
This video will show you how to quickly iron curtains:
Steamer - quick and easy
To make ironing curtains much easier use a vertical steamer or a regular iron with a steam function.
After washing and drying, the fabrics are hung in place and in a vertical position, suspended, and treated with steam using one of the devices.
However, this method is not suitable for all fabrics. ironing. Ironing with a steamer is not suitable for items made from:
- chiffon;
- organza;
- polyester;
- nylon.
Using steam in these cases may cause stains and deformation of the material.
How to do without electrical appliances?
Lightweight curtains made of polyester, nylon and nylon can be given a perfectly smooth look without the use of any household appliances.
They will have to be changed or wrung out periodically. But these small efforts will be rewarded with an impeccable result. Under the weight of its mass, the curtain will ideally straighten and level out.
Smooth out wrinkles without removing the fabric
Owners of steam generators or hand-held steamers can use these household appliances to care for curtains.
Steam treatment is carried out without removing the canvas. The material is cleaned of dust, straightened, and the curtains take on a fresh, well-groomed appearance. The treatment is carried out from top to bottom, the fabric is carefully pulled back and straightened.
Not all curtains can be ironed without removing them. This method of care is unacceptable for very thin and delicate tulle. Therefore, you must first make sure whether the steam generator can be used for this fabric.
Video on how to clean curtains without removing them:
How to wash without ironing?
Probably every housewife thinks about this. It turns out that you can wash your curtains and avoid the ironing process altogether by using some tricks.
In order not to iron curtains, you must adhere to the following rules:
- Products should be washed by hand in warm water with a small amount of detergent.
- Fold the long sheet so that its size matches the size of the bathtub, and carefully place it on the bottom.
- Wash gently, gently stroking your hands, then turn the fabric over and repeat the procedure.
- After washing and rinsing, under no circumstances should you wring it out!
- Hang the curtains and let the water drain, then dry them flat.
- Do not allow it to dry completely; hang the cloth back in place while it is still damp. It will straighten out under its weight and the surface will become smooth.
Tips and prohibitions
Some useful tips:
- When purchasing curtains, you should check for a label with information about proper care. If it is not available, it is better to consult with the seller what fabric they are made of and whether the product can be washed and ironed, and at what temperatures.
- If you have doubts about the name and properties of the fabric, it is recommended to contact a dry cleaner for the first wash.
Specialists will perform high-quality cleaning of curtains and give recommendations for further independent care.
- Only freshly washed curtains need to be ironed. Otherwise, stains and streaks may appear on the fabric, especially when treated with steam.
- Before ironing, you must clean the soleplate of the iron (using a special pencil or spray).
Even a small lint, invisible to the eye, can melt and stick to the fabric when heated.
- Curtains made of silk, nylon, polyester, organza and chiffon are ironed without steam, so as not to cause deformation of the fabrics.
- Products with embroidery, beads or rhinestones are ironed from the reverse side.When in contact with a hot surface, decorative elements may melt and stick to the soleplate, damaging both the iron and the curtain.
- For the front side of the canvases, gauze or fabric linings are used.
Conclusion
Curtains should be washed when they become dirty. For each fabric, you should select the correct washing mode, ironing method and temperature indicators.
Then the products will create comfort in your home for many years. In addition, they will always look neat and well-groomed.