How to iron trousers with creases quickly and without unnecessary hassle?

Classic trousers with arrows are one of the basic items in the men's and women's wardrobe. Classics are always true to traditions, which require careful ironing of things and mandatory ironing of the arrows.

From quality ironing the whole image as a whole will depend, and what impression it will make of a person wearing trousers with arrows. Read our article about how to properly iron trousers with creases.

Preparing for ironing

Ironing trousers requires a responsible approach and compliance with phased work.

To start ironing, needs to be prepared:

• workplace, preferably an ironing board;
• a spray bottle containing clean water;
• a mesh (gauze or piece of fabric) through which the trousers will be ironed.

The temperature of exposure depends on the composition of the fabric. It is displayed in accordance with the manufacturer's recommendations, which are indicated on the label. It is usually attached to the side seam or waistband of the trousers on the inside.

Step-by-step instructions for ironing after washing with photos for beginners

Before ironing, trousers must be inspected, the contents of the pockets checked, and all foreign objects removed from them.If an item needs cleaning and repairs, they are carried out before ironing.

Men's, women's and children's classic trousers with arrows are ironed using the same technique.

How to smooth the top of men's and women's pants?

Ironing begins with inspecting the product and determining the condition of the item. The upper part of the trousers has a lot of details, seams and stitching. All this creates additional difficulties during processing.

The burlap of the pockets is smoothed out first.. In this case, the temperature setting on the iron must be adjusted taking into account the burlap fabric. Iron the pockets, first turning the pants inside out.

Smoothing direction: top to bottom. The trousers are straightened and put on the ironing board from the narrow edge. Pay attention to the pocket area and belt. It must be ironed on both sides through gauze. After this, iron the fly area and seams.

If the trousers cannot be placed on the ironing board, you can use additional devices that will allow you to separate the front and back of the trousers during the ironing process.

You can use a small shield for this.. Its size can be the same in length and width as a landscape sheet or a little larger. You can make such a shield using a dense base, for example, plywood. The top of such a shield is covered with thick fabric. You can also use a large format book wrapped in thick material.

Pants

The trouser legs themselves are ironed along the entire length. This should only be done through a specially designed mesh fabric, gauze or cotton. The material must be moistened.

You can do this in one of the following ways:

• using the steam function in the iron;
• spraying water from a spray bottle.

The trouser legs are ironed first on one side and then on the other. After this, they move on to ironing the inside of first one and then the second leg. At the same time, the second leg folds back so as not to interfere.

When ironing from the inside is completed, the trousers are turned right side out.. And, using additional fabric, iron along the trouser legs. The arrows are not yet smoothed at this stage.

Smoothing out the arrows

The transition to ironing the arrows is a crucial moment that does not tolerate fuss. Pants must be turned right side out.

In classic models, two darts are stitched at the back and front. The folds should be completely straight. And they should go from the darts to the very bottom.

When folding trouser legs, focus on the following points:

1. Matching seams (internal and side).
2. The arrows should be a continuation of the darts.

To prevent the fabric from moving when ironing, the trouser leg can be secured with invisible pins or paper clips. The standard method of ironing out wrinkles begins with fixing the correct position of the trouser legs. After that perform ironing, following the recommendations:

• ironing from the front side can only be done through additional fabric - gauze;
• It’s better to start from the knee area - approximately from the middle of the trouser legs;
• when ironing, it is desirable that the fabric be slightly stretched - this will make the arrows smoother and clearer;
• It is better to move the iron from zone to zone without slipping, moving it to a new place each time;
• if the fabric allows the use of steam, this must be done;
• they move on to the second leg only after the first arrow is completely ironed and the result is satisfactory;
• for standard classic models, the arrow is not smoothed down to the waist, leaving up to 10 cm.

How to iron trousers with arrows, step-by-step photos for beginners:

Is gauze necessary or can you do without it?

Suit fabric used for dress pants requires delicate handling. Direct contact of the material with the hot soleplate of the iron may result in:

• scorch marks;
• shiny places;
• deformation of the material and other difficult-to-remove or completely irremovable defects.

Any of the options serves these purposes:

• gauze;
• a piece of cotton fabric;
• special purchased mesh fabric for ironing.

Without using gauze, you can iron trouser legs only from the inside, and at the permissible heating temperature of the iron.

You should not iron creases or carry out other ironing work on the outside of trousers without it.

Advantages of using gauze for ironing:

• does not shed;
• protects the trouser fabric from deformation;
• due to its texture it promotes good steaming;
• prevents the appearance of shiny, unnaturally shiny areas;
• promotes clear smoothing of arrows.

Using gauze or other additional fabric will help extend the life of the trousers and avoid defects.

How to smooth it with a steamer?

Working with a steamer is different from ironing. The operating principle of the device allows steam to penetrate deeply into the fabric, even affecting pockets.

When working, you must adhere to the following sequence of actions:

1. The trousers are secured in a vertical position at the lower edge of the trousers. In this case, the heavier (upper) part of the trousers is at the bottom.
2. The steamer is turned on and adjusted to the required temperature.
3. Working with the nozzle in a vertical direction, smooth it out without holding it in one place.
4. The location of the arrows is fixed with special clamps that come with the steamer. The clip itself is put on the steamer nozzle, and the fabric of the trousers is attached to it in the place where the arrow should be.
5. Turn on the steam supply to fix the arrow.

Once you acquire the skill, the process of smoothing creases on trousers with a steamer will not be difficult.

How to create crisp folds without using an iron?

In addition to the usual method of ironing the arrows, you can use alternative options using improvised means.

Ironing can be done:

• applying pressure;
• using a hair straightener.

The press can be organized by the pressure of a load, for example, heavy books. Another option is to spread your pants under the mattress. But such methods will not give such clear arrows as those obtained when processing with an iron.

It is also advisable to use a heated device through additional fabric.. You need to act extremely carefully so as not to burn the material.

Work on mistakes

If the perfect folds are not obtained right away, and the work was carried out with errors and there are shortcomings, you will have to correct the situation. Without proper experience, false folds may appear when ironing. They spoil the image and require mandatory elimination.

For this you will need:

• water;
• table vinegar 9%;
• gauze.

Work order:

1. Prepare a solution from a liter of water and two tablespoons of vinegar.
2. Soak gauze in the solution.
3. Turn the trousers inside out.
4. Steam through damp gauze.
5. Repeat the entire process of smoothing the arrows from the very beginning.

Other options for eliminating false folds:

• washing with laundry soap;
• use of a spray bottle and subsequent ironing;
• ironing through a damp cloth.

How to secure the arrows so that they last for a long time?

When ironing classic trousers, everyone wants the creases to remain sharp for a long time. Additional processing will help to do this. It can be organized using vinegar, starch or soap.

Soap for the underside

Turning my trousers inside out, Dry a dry soap along each trouser leg along the fold line.. This method will help secure the fold. After this, the trousers are turned right side out and thoroughly ironed.

Do not use wet soap. This may cause a stain to appear on the front of the product.

Vinegar and starch

A simple technique using vinegar will help strengthen the fold and make it more durable.

To do this, prepare the following composition by mixing the components:

• water (1 l.);
• vinegar (1 tbsp);
• starch (1 tsp).

Work order:

1. The trousers are turned inside out.
2. Wet the trouser legs with a slightly prepared solution.
3. Turn it right side out.
4. Mark the folds.
5. Smooth out the arrows in the usual way.

Ammonia or vinegar

One of the simple ways to fix the arrows is ammonia or vinegar. These substances are used diluted in water.

1. Prepare a solution at the rate of 1 tsp. prepared preparation per liter of water.
2. The fabric through which the arrows will be ironed is moistened in this solution.
3. The fabric is wrung out.
4. Ironing is carried out in the usual way.

For each arrow, the supporting fabric is moistened separately, since the dried auxiliary fabric loses its function of fixing the arrows.

5 recommendations

Simple advice from experts will help iron classic trousers with creases and avoid mistakes:

1. If there is no label on the trousers indicating the composition of the material and the ironing temperature, then you need to start with the minimum temperature.
2. Only clean trousers should be ironed. If there are unwashed stains, then under the influence of the high temperature from the soleplate of the iron they will become more noticeable and literally stick to the fabric.
3. Pants with creases should be transported with extreme care.
4. Synthetic materials are ironed without steam function.
5. After ironing, the trousers are not put on immediately and are not hung in the closet. They need to be given time to cool and dry.

Conclusion

Beautiful creases on classic trousers emphasize style and image. This is always appropriate clothing for special occasions and the office, which can complement the fashionable image of not only men, but also women.