Useful life hacks on how to iron a wrinkled cap

A cap is a practical headdress, stylish and comfortable, but after washing or improper storage, an item made from fabric can easily become wrinkled.

How to iron a product that has a complex cut? We'll tell you in this article how to iron a wrinkled cap (including an army one) or a baseball cap after washing or improper storage.

Preparing for ironing

Before you start ironing, it is necessary to study the information on the label on the inside.

If washed incorrectly, the shape of the item can be so lost that it will be impossible to smooth out the cap. For example, after washing a product with a cardboard insert in the visor.

Restoring the shape of a baseball cap after washing

When the fabric of a baseball cap gets wet as a result of washing, it loses its original shape. To restore it, you need to do the following:

1. Moisten the fabric well.
2. Place the baseball cap on a suitable frame.
3. Straighten the matter as carefully as possible, as the result will depend on this.
4. Leave it in this position to dry.

The following can be used as a drying frame:

• a regular 3 liter glass jar;
• a balloon of a suitable size;
• a round salad bowl turned upside down;
• special forms for hats, etc.

How to straighten a baseball cap after washing, video tip:

Using an iron

Using an iron to straighten a crumpled cap is not an easy task. Fabrics that can be ironed It’s convenient to straighten using not the ironing board itself, but one of the available tools:

• arm sleeve;
• a tightly rolled hard roll of towels.

When using an iron, you must avoid:

• smoothing out folds;
• ironing folded items;
• deformation of the crown;
• ironing the visor.

Ironing from the front side is carried out only through gauze or other additional fabric.

Using a steamer

Using a steamer, it is even easier to iron a cap than with an iron.

In order for the item to straighten out, it is advisable to use a form: a baseball cap worn on it will straighten out and restore its shape under the influence of the steamer.

The temperature regime on the device must be adjusted taking into account the material of manufacture. For synthetics – minimal, for cotton – higher.

Before you start steaming, you should make sure that the product has no contraindications to this procedure.

How to wash without having to iron?

Products with a dense top and a hard visor are not machine washable., they are cleaned by hand.

The best cleaning effect is achieved when treating difficult areas with an old toothbrush. To prevent the product from losing its shape, it can be starched. In this case, you won’t have to iron the cap at all.

A special solution is used for starching. Preparation procedure:

1. Prepare a container, preferably a deep basin.
2. Add starch (100 grams).
3. Pour in cold water (120 grams).
4. Pour in hot water (0.9 l).
5. Stir until smooth.
6. Leave the starch solution to cool.
7. Moisten with solution. The most convenient way is to simply dip it into the prepared solution, holding it by the visor. It already has a seal and does not require additional starching.
8. Place the baseball cap on a frame that fits in size.
9. Straighten out very carefully.
10. Leave until completely dry.

How to straighten out the army (military)?

Ironing an army cap allows you to straighten the fabric, which will make the item look aesthetically pleasing and neat.

The soft fabric allows you to stretch it over the tapered edge of the ironing board. Turning it so as to iron the item from all sides, it is ironed using steam.

To prevent a freshly ironed item from becoming wrinkled, it is advisable to give it time to cool and only then put it on.

Another way to restore the shape of an army cap is in the video:

Recommendations

In order for the cap to be smoothed efficiently and without unpleasant surprises, It is recommended to adhere to the following tips:

1. Studying the product label is the first stage of high-quality ironing.
2. When ironing the product on the front side, it is recommended to add additional fabric.
3. If there are decorative elements and trims, care must be taken not to catch them with the soleplate of the iron. Such areas of the cap are ironed either from the inside out or through auxiliary fabric.
4. If the item is not too dirty, simply dry cleaning may be sufficient. In this case, the material will not deform.
5. A poorly washed baseball cap may become stained and stained as a result of ironing, which is very difficult to remove later.

Conclusion

Ironing a cap is a simple task that can be easily done at home if you follow all the rules.

Some types of creases cannot be smoothed out - the visor is wrinkled, broken, etc.. Only items that have been properly washed and dried can be ironed.