How to iron a men's shirt with long and short sleeves without creases?

A carefully ironed shirt gives its owner a neat, respectable appearance.

It is especially important to be careful in dressing for people who want to impress others.

Carelessly ironed wardrobe items cause unpleasant associations; their owner may appear in an unfavorable light.

This article will be about how to properly iron shirt sleeves without arrows.

How to iron a long sleeve shirt with a regular iron?

So, how to properly iron a man's long sleeve shirt without the formation of arrows on them? When ironing shirts, it is more convenient to start with small parts and paired elements.

1. The collar is placed on the ironing board with the wrong side facing up.
2. The sole of the iron must be moved from the corners to the middle - this will prevent the formation of wrinkles.
3. The loop and areas around the buttons are carefully processed.
4. Then turn the piece over to iron the other side.

Time to move on to the cuffs and sleeves:

• The cuffs are laid out inside out and ironed from the corners to the middle.
• The reverse side does not have an additional layer of fabric to add density, so it wrinkles a little. To avoid unnecessary folds, you need to iron it closer to the center.
• Repeat processing on the front side, being careful not to touch the buttons.

• Then you need to lay out the sleeve so that the seam is at the top.When ironing, stretch the fabric little by little, first on one side, then on the other, so that arrows do not form along the edges.
• The bottom of the sleeve is ironed so that it is a few centimeters short of the cuff.
• When turning the sleeve, it must be held by the cuff and collar. The center of the part is carefully ironed. If there are folds on the sleeve, they should be ironed with the tip of the iron.
• The sleeve is turned over again, the button should be on top. Here you need to use a sleeve - a special small board.
• Place the sleeve on it with the cuff forward, then iron the adjacent fabric. The sleeve is slightly stretched from the armhole side, the fold is ironed a couple of centimeters from the cuff.
• Then you need to iron the fastener bar on both sides, fasten the button and run the iron along the junction of the bars.
• Repeat steps 1-5 for the second sleeve.

1. Place it on the narrowed end of the board so that the collar points towards the wide one.
2. Straighten the fabric and iron the yoke and shoulders, placing the iron parallel to the collar. The stitches are processed with the nose.

The next step is ironing the shelves:

• Holding the shelf by one of the edges and the collar, it is placed on the board with the shoulder towards the narrow part.
• First, it is better to iron the shelf on which the buttons are sewn. The space between them is ironed with the nose of the iron.

• The shirt is then moved so that the side seam of the armhole is on the board. It must be ironed, after which, gradually moving, process the side seam, then the back.
• The seams of the yoke and armhole can be pulled a little - this helps them smooth out better.

After all the details are ironed, the shirt should be hung on hangers.The top button on it is fastened - this way it is possible to avoid the formation of wrinkles.

How to iron a short sleeve?

Ironing short-sleeved shirts follows approximately the same pattern. Step-by-step instruction:

1. The collar, straightened on the board, is ironed with the end of the iron. If you want the fold of the collar to look natural, you should not iron it.
2. Sleeves. Carefully lay it on the board, seam side up, first iron the seams, then the sleeves. For convenience, you can pull it on an armband or on a roller made from a folded towel.
3. Shelves. Iron without creating creases near pockets and buttons.
4. Back. Move the shirt along the board to iron the back from one side seam to the other.

Alternative ironing methods and techniques

Recently, more and more devices have appeared that perform the same functions as an iron. In addition to irons, for ironing shirts You can use steamers and steam generators.

A steam generator, unlike a simple iron, has more power. It easily smooths out wrinkles that an iron cannot handle. A device called a steam generator is capable of producing only dry steam.

A steamer, unlike a steam generator, produces hot steam. But he is not able to replace the iron - his used to refresh things and eliminate caked folds, reduce unpleasant odors.

If it is not possible to use special devices, you can give a shirt made of synthetics, chiffon or silk a pleasant appearance without them.

Adviсe

Easiest to iron shirts, which have just dried after washing. You don’t have to wait for final drying - the process will be easier.

Be sure to study the label sewn to the shirt - it indicates the composition of the fabric and recommendations for caring for it. Please note the recommended iron temperature.

If there is no label on the shirt, and the composition of the fabric cannot be determined, set the iron to minimum heat.

Iron, gradually increasing the temperature. Do this until the fabric begins to smooth out. If the iron suddenly begins to glide worse, the temperature must be reduced, so that its sole cools down a little.

Video on the topic

Video instructions for ironing a long sleeve shirt:

Conclusion

Carefully ironed clothes provide a pleasant appearance to their owner. A person's neatness is always highly valued - both in the workplace and in everyday life.