With or without arrows: how to iron a men's long-sleeve shirt

An elegant long sleeve shirt is often part of the wardrobe of both men and women. High-quality washing and ironing gives the product an attractive appearance.

There are certain rules exactly how to iron a shirt with long sleeve. By adhering to them, it will be easy to look like a neat and neatly dressed person.

Let's take a closer look at how to properly iron a men's long-sleeved shirt so that arrows do not form on them.

Preparing for ironing

Before proceeding directly to ironing, you need to prepare the product itself and all the necessary accessories.

To make ironing convenient, you need to properly organize your workplace.

It is important to first study the product labelon which the manufacturer's care recommendations are indicated. As a rule, the recommended ironing temperature is mentioned on it.

The temperature setting is schematically indicated on the label by dots. The appropriate mode will need to be set on the iron prepared for ironing the shirt.

If you don't have an ironing board, you can use a regular table, but first you will have to cover it with a thick, non-fading fabric.

How to do it right: step-by-step instructions with photos

Ironing a man's shirt correctly is more difficult than it seems at first glance. The shirt must be washed and dried properly.

It is necessary to inspect the shirt itself and perform such actions:

1. If there are special plastic parts in the corners of the collar that help it keep its shape, they need to be pulled out. But it’s better to do this before washing.
2. Unfasten the buttons.
3. Make sure that the item does not require repair - all buttons are present and there is no damage.

If the shirt is completely dry, or even dry, you can evenly spray it with water from a spray bottle and leave it in a plastic bag for a quarter of an hour.

Features of collar processing

The collar is laid out with the wrong side up. It is ironed by moving the iron from the edges to the middle.

Handle with care:

• space along the placket and around the top button;
• loop for the top button.

After this, the item is turned over and the collar is ironed from the front side. For materials that are difficult to iron, you can use the steam function.

If the shirt has fasteners in the corners of the collar, they are inserted and carefully smoothed. The fold of the collar should not be smoothed.

Cuffs

After the collar is ironed, move on to the cuffs:

1. They are laid out wrong side up on the ironing board.
2. Iron in the direction from the corners to the central part.
3. Turn the part over to the front side.
4. Iron with force from the corners.
5. For cuffs designed for cufflinks, combine both loops and iron them together.

Sleeves

After processing the cuffs, iron the rest of the sleeve. To do this, first process one sleeve of the shirt, and then the second:

1. The part is turned with the seam up.Iron, stretching and straightening the material so that arrows or creases do not form.

   In this case, the iron should no longer touch the cuffs, not reaching them one or two centimeters. They also leave the seams on the armhole side for later.

2. Turn the sleeve over and iron the central part. Turn the part over again and put it on the sleeve, starting with the cuff.
3. Ironing begins by retreating 20 mm from the cuff.
4. Smooth the bar on one side and then on the other side.
5. Buttons on the cuffs are fastened.
6. Iron the bar with the fastener.

An alternative option is towels tightly rolled into a roll shape.. In the same way, a duvet cover or other material can be replaced by a neatly folded and then rolled up blanket.

Shoulder part and yoke

After the collar and sleeves are ironed, the shirt is put on the ironing board from the narrower end so that it is convenient to iron the shoulder part.

Next they move on to ironing the junction of the collar with the shirt, and the seams on the armholes. When ironing shoulder seams, the collar should not fall under the iron again.

Shelf

Begin processing the shelves with the one on which the buttons are located.. The front of the shirt is laid out lengthwise on the ironing board so that the shoulder part is on the narrowed side of the ironing board.

Shelf processing:

• straighten the fabric;
• near the buttons, the iron should be moved carefully, trying not to touch them;
• the iron is moved from bottom to top;
• after the part of the shelf near the collar is ironed with the tip of the iron, the device is moved to the lower edge of the product;
• repeat the processing on the second shelf.

If the strip is hard and multi-layered, it is recommended to first iron this part first from the inside and then from the face.

Back: “finish straight”

The back and side seams are much easier to iron. To do this, the product is placed on the ironing board so that the shoulder seam is on the narrow end of the ironing board, and the bottom cut is on the wide end. It is recommended to slightly stretch the side seam during the ironing process.

The step-by-step process of ironing a men's shirt is presented in the video:

How to iron without an iron?

Sometimes situations arise when it is not possible to fully iron a shirt with sleeves. Universal ways how to iron a shirt without an iron, no, but There are easy methods to get a fairly good result:

1. One option to do without an iron is to turn off the “spin” mode when washing in the washing machine. In this case, the wet product is taken out, hung on hangers over a bathtub or other container, and the water is allowed to drain.
2. Lightly spray the wrinkled shirt with water from a spray bottle. Before it has time to dry, they put it on the body. As the fabric dries directly on the person, it straightens out.

Steamer and steam generator

At home, you can iron a shirt not only using an iron, but also other equipment: a steamer and a steam generator. Before using a particular device, it is recommended to study the instructions for it.

To popular shirt ironing machines include the following:

• Steam generator. At its core, this device resembles the operation of an iron. The principle of operation is to steam the item with a powerful jet of steam.

  At the same time, dry steam can cope even with a heavily wrinkled shirt with sleeves.

• Steamer. It is especially effective for loose fabrics. The shirt is exposed to hot steam, straightening out even complex creases and folds.
• Steam manken. This device is an inflatable mannequin that resembles a human torso. This is a professional device that helps deal not only with wrinkled shirts, but also with other items of clothing. The steam mannequin is not used in everyday life.

6 recommendations on how not to spoil something in the process

Iron a shirt with sleeves well simple tips will help:

1. Before you start processing the product, you need to study the label.
2. If there is no label indicating the ironing mode and the composition of the fabric is unknown, the iron must be set to the minimum temperature setting. If necessary, the temperature can be carefully increased.
3. It is necessary to carefully iron the fabric near the buttons, since upon contact with a heated surface, the plastic can melt, deform and even damage the product itself.
4. It is recommended to immediately hang the ironed item on hangers to prevent it from getting wrinkled.
5. If the shirt has a print, you need to iron it from the wrong side or through a special fabric.

Conclusion

A well-ironed long-sleeved shirt is a universal item of clothing that emphasizes your image. Once the ironing process is mastered, it will go faster than the first time.