Useful tips on how to iron a leatherette jacket at home

If a leatherette jacket is stored folded for a long time, folds will form on it, which spoil the appearance of the product.

These folds are often smoothed out after hanging the jacket on hangers.

But sometimes, to get rid of them, you need to make an effort. About, how to iron a jacket from leatherette at home, read the article.

Features of preparing and ironing different types of artificial leather

The entire process of ironing leatherette clothing, including preparation, depends on the specific type of material.

The following can be used as leatherette for sewing a jacket:

1. Polyester - This is a very practical material. It can be tidied up by smoothing it with an iron (at temperatures up to 40 degrees).

   To understand whether it is possible iron a jacket made of a material such as polyester, you need to try this on a small sample of fabric sewn into one of the internal seams of the product.

   If there is no sample, you should carefully iron a small area of ​​fabric on the jacket, in an inconspicuous place.

2. Polyurethane is more capricious. It wrinkles more often and is recommended to be treated with hot steam or an iron. At the same time, polyurethane items are often smoothed out simply by hanging on hangers.

   If this does not happen, a gentle steam treatment method should be used.One such method is to hang your jacket on hangers over the bathtub, turn on the hot water and wait until the room is filled with steam.

   After this, you can close the bathroom doors and leave the jacket to hang in a steamy state.

3. Microfiber products Can be ironed, but only at minimum temperature. It is best to choose the “silk” mode. Steam treatment is strictly prohibited. Only completely dry items can be ironed.
   But the most important thing is to check at the preliminary stage using the icons on the tag whether the manufacturer allows the jacket fabric to be exposed to a warm iron.
4. Eco leather is a modern substitute for genuine leather, made from woven fabric and polymer. Eco leather jacket can be ironed.

   The temperature should be low. The steam function should be turned off. You need to iron from the wrong side, and preferably through gauze or chintz fabric folded in half.

How to iron?

If the material allows the use of an iron, and there is information about this on the tag, and the folds are very deep, it is worth using this option. It is more efficient and faster.

But its use requires care and caution. As already said, The iron temperature should be minimal (30-40 degrees).

Before you start ironing large parts of the product, you need to test ironing on an inconspicuous area of ​​the underside of the sleeve or back.

If, as a result of such a test, the material retains its original color and texture, and there are no melted or scorched spots left on it, you can begin ironing the entire jacket.

Before you start ironing your sleeves, you need to put a towel or piece of fabric inside. This is necessary so that during the heat treatment the leatherette parts do not come into contact. Otherwise, they may be soldered together and the product will be damaged.

The smoothed jacket should be hung on hangers, with bulky towels placed in the sleeves so that new folds do not form as the leatherette cools.

After ironing, the item should cool in natural conditions and at a uniform temperature.. At this time, it should not be exposed to direct sunlight or be near a heating device.

The video will show you how to smooth leatherette with an iron:

Exposure to steam

Exposure to steam is not allowed for all types of leatherette. If the manufacturer allows wet ironing, This can be done using an iron with a steam function or a steam generator.

First of all, the jacket is hung on hangers. All its details are carefully straightened out. After this, the steaming mode is turned on and the ironing procedure begins.

The iron or generator must be kept at a great distance from the product. If the leatherette is dense enough, a distance of 10-15 cm should be maintained. When working with thin leatherette, the distance should be increased to 20-25 cm.

The processing process should last until the folds are completely smoothed out. But you need to ensure that the material does not overheat. Once steaming is complete, leave the jacket until it cools and dries completely.

Traditional methods

Ironing using an iron and a steam generator is quite effective, but can be risky. Therefore, especially careful owners of leatherette products prefer safer traditional methods of smoothing out caked clothes.

One such method has already been described above, in which the effect of a steam bath in the bathroom is created for the jacket. But there are other folk methods.

Vinegar and laundry conditioner

To use this method, it is necessary to mix clean water, vinegar 9% and conditioner in equal proportions for regular machine wash.

The resulting solution is poured into a spray bottle and the jacket is generously sprayed with it. It must first be hung on hangers in the bathroom or on the balcony.

Next, the jacket is left to dry completely. After 30-40 minutes it becomes much smoother. The soap solution will leave whitish stains on it that need to be removed with a damp cloth.

Glycerol

You can try to smooth thin leatherette using glycerin. It is applied with a cloth or cotton pad to the wrinkled areas, which should smooth out as a result. If necessary, the procedure is repeated 2-3 times.

Rain

To make sure you don’t damage the item, you can smooth it out using your own body and rain.. In rainy weather, you need to wear a jacket and take a walk under an umbrella, lasting at least 2 hours.

As a result, the material may not be completely smoothed out, but it will take on a more presentable appearance.

Shoe polish

Transparent shoe cream allows you not only to smooth out small wrinkles, but also to make the jacket more durable:

1. It is applied in a thin layer to the entire product, treating creases and folds with special care.
2. Next, the jacket should hang a little (about an hour).
3. After that, you can put it on and go outside.

Removing creases and folds after purchase

When you bring a new jacket from the store, you should pay attention to smoothing it out to remove creases formed during transportation and storage of the item.

If after a few days the jacket has not smoothed out, you should turn it inside out and wet it more generously. You can make a water bath for her in the bathroom. It is not advisable to use an iron or hot steam for new things.

Tips and prohibitions

Before ironing or other care procedures for leatherette clothing, be sure to read the information on the tag. Some items can only be dry cleaned.

The thinner the material, the easier it is to damage.. This needs to be taken into account. For light, thin jackets, it is better to use gentle ironing methods or very careful treatment with a barely warm iron.

The surest way to eliminate small creases is to wear the item as often as possible in rainy or foggy weather.

And the folds formed on the leatherette during wear should not be smoothed out at all – they do not spoil the appearance of the thing, and besides, they will appear again and again.

Conclusion

A leatherette jacket is a comfortable, practical and always relevant thing.Good quality leatherette is not cheap, but it also looks very impressive.

You should treat such clothes with care, and then they will last for many years.. This means that, if necessary, ironing a leatherette jacket should be done with care and caution.