Zelenka

Accidentally spilled greenery can cause a lot of problems. The bright green color of the solution can stain any surface, and it is not easy to wash off such contamination, especially when the stain has set and dried.

In most cases, it is possible to try to remove the green mark using special preparations and folk remedies.

We’ll tell you in this article how and what you can use to quickly wash brilliant green from various surfaces.

Quick response: where to start?

At its core, greenery is antiseptic intended for external use. Diamond green solution is obtained synthetically.

It has a distinct bright color, which upon contact quickly colors surfaces and adheres to them. This effect is due to the inclusion of aniline dyes.

The primary task when a difficult-to-remove contaminant gets in is to prevent the stain from growing and being absorbed into the material. To do this, try to wet the brilliant green thoroughly, collecting as much of the spilled liquid as possible. This should be done with blotting rather than rubbing movements.

You can use rags, napkins, paper towels for this.. Bulk products with good absorbency, such as starch or soda, are also suitable.

While the stain is fresh, there is every chance of dealing with it.But only with a quick response. At the initial stage, you should evaluate the type and type of soiled surface. Based on its characteristics, a method of further influence is selected.

How to remove stains using improvised means?

Simple recipes are very effective. They help remove stains efficiently and effortlessly, if the stain is not old.

Laundry soap

For a newly planted spot, even a simple washing away the mark using laundry soap. But this method is only suitable for non-porous surfaces and fresh stains.

Eraser

On a hard surface, an eraser can help remove the brilliant green stain.

Soda and vinegar

For processing, prepare a mixture of vinegar and soda. Both substances are taken in equal proportions, mixed and applied to the stain. Rub the stained area, then remove the remaining mixture and wash the treated area.

Hydrogen peroxide, acetone

Peroxide or acetone can be used to remove stains brilliant green. The liquid is applied so that it gets deep into the material and dissolves the brilliant green.

In difficult cases, you can leave a sponge soaked in acetone, peroxide or alcohol on the stain for a while.

This can only be done in cases where there is no likelihood that the solvent will damage or discolor the base.

Alcohol

For cleaning surfaces from brilliant green pharmaceutical alcohol can be used. Another alcohol-containing drink, preferably clear, will also work.If you use brightly colored alcohol-containing solutions to remove brilliant green, you can additionally get new stains on the surface.

Features of using household chemicals

Stain removers and cleaning products for various surfaces will help to cope with the situation. Their use must be in accordance with the instructions and take into account the type of soiled material. For textiles, one of the stain removers can be used - Antipyatin, Vanish and others.

Good results can be achieved by:

• Dr.Beckmann Office and hobby;
• Dr.Beckmann Handle.

For hard surfaces that allow the use of chlorine-containing compounds:

• White;
• Domestos, etc.

The product can be used on any surface, acts quickly and effectively. The exposure time is several seconds. After this, the material is cleaned and the remaining product is washed off with water. Price for 0.6 l – from 300 rubles.

The nuances of cleaning various surfaces

The selection of a remedy for brilliant green must take into account all the specifics of the material. Not all coatings react equally to solvents, as a result of which the material itself may lose its functional characteristics and visual appeal.

How to clean laminate flooring?

You can remove antiseptic from laminate flooring by using dishwashing detergent., citric acid solution, using antipyatin type products. If the listed drugs do not help, then you can try using vinegar, alcohol or acetone.

Plastic

You can tidy up the plastic surface using whiteness. Also suitable for fresh marks are washing powder, alkaline soap or purified gasoline (kerosene). After removing the brilliant green, the plastic must be thoroughly washed with an aqueous solution with the addition of vinegar.

Silicone case, rubber

It is not possible to remove brilliant green from silicone or rubber using every product. For processing, you can use only those recipes that will not react with the material of the item itself.

The following methods are suitable:

1. Scrubbing with toothpaste.
2. Use for washing soda.

Due to the texture of silicone and rubber, it is extremely difficult to remove brilliant green from them, and in some cases it is almost impossible.

Linoleum

A stain of diamond mortar on linoleum can spread very quickly. To prevent this, you need to blot it with a rag or napkin, preventing the green mark from expanding.

As a solvent and stain remover you can use one of the following methods:

• ammonia;
• acetone;
• nail polish remover.

Even when the stain is removed, there is a chance that over time the mark will still appear on the affected area. Read more Here.

Furniture

Green stain on upholstered and cabinet furniture You can try to remove it using the following substances:

1. A mixture of soda and vinegar.
2. Alcohol.
3. Hydrogen peroxide.

Moisten a napkin with the product and treat the stain until it completely disappears. If you leave it unwashed, then over time it will be much more difficult to wash off the brilliant green.

Read about how to remove brilliant green from furniture. here.

Leather

Soiled hands or traces of green paint on the body require removal. It is not advisable to use aggressive agents for this purpose.

For these purposes, you can use the following available tools:

• laundry soap;
• soda;
• toothpaste;
• wet wipes (especially those designed for cleaning office equipment);
• alcohol;
• vinegar;
• waterproof makeup removers;
• lemon and others.

Even if you don’t use any special method to remove brilliant green, it can leave the body on its own in 5-7 days. He will tell you how to remove brilliant green from skin this article.

Textile

It is very difficult to remove brilliant green from textiles, and it is almost impossible to do this with old stains. Therefore, you need to act very quickly. And even in this case, the result is not guaranteed.

Ways to deal with stains:

1. Table vinegar. Apply it undiluted to the stain and leave for 10 minutes. After this, apply soap foam to the stain and leave for the same time. Finally, the item is washed using laundry soap.
2. Salicylic acid. This pharmaceutical remedy is very effective, especially on fresh stains.
3. Hydrogen peroxide or acetone – used for washing off stains of brilliant green in undiluted form.
4. Bleach. This method is only suitable for white fabrics.

For delicate fabrics with unstable dyeing, brilliant green removal is not possible. Read more here.

Prohibitions when removing traces

When washing brilliant green It is necessary to take into account a number of prohibitions:

1. When removing stains, do not use sharp objects or tools with an abrasive surface, as this can lead to damage to the base, which must be washed.
2. You should not rub off the brilliant green with your bare hands, as there is a risk of getting dirty.

   In addition, some cleaning compounds are caustic and can cause skin irritation. It is recommended to wear rubber gloves before carrying out work.

3. You should not delay removing a brilliant green solution stain, regardless of the type of surface. The more time passes, the more persistent the mark becomes.
4. You shouldn’t use all the solvents you have on hand at once. When mixed, they can give an unpredictable result - even corroding the very basis of the material. This can also produce caustic fumes that are harmful to humans.

4 useful tips

When removing brilliant green from surfaces The following expert advice should be taken into account:

• a surface stained with brilliant green (especially fabric) may need to be removed not at once, but in several stages;
• if an item stained with brilliant green has been washed and ironed, the stain becomes permanent and will be almost impossible to remove;
• if there are doubts about the safety of a particular product for the surface, it must first be tested in an inconspicuous area;
• Some preparations used as solvents can discolor the shades of the base material; for surfaces with unstable colors, the use of such products should be very careful, with mandatory preliminary testing.

Conclusion

It is possible to quickly wash brilliant green from most surfaces. But in some cases it will not be possible to completely solve the problem. This is due to the durable color of the diamond solution and the chemical composition that quickly comes into contact with various materials.