Good advice on how to remove scratches from sunglasses at home

During wear, sunglasses may develop scratches and abrasions, which significantly impair visibility.

To avoid having to waste time and money on purchasing a new product, you can try to restore the glass to its former transparency.

Read this article to learn how to remove scratches from sunglasses.

Can scuff marks be removed?

You can remove scratches from sunglasses if they are shallow.. It's easy to check.

Simply run your fingernail over the defect. If he falls into damage, then the probability of success is low. During processing, the glass may simply burst.

Unlike deep defects, surface scratches can be easily repaired. For this purpose, various polishes with abrasive substances are used.

Before buying new glasses, you need to try to revive the old model. It is possible that the result will be positive and the item will last for some time.

Sun protection for glass lenses

You can remove scratches from sunglasses using improvised means and special compounds. The main thing is to follow the instructions and not use substances that can damage the glass.

Even if the glass looks visually clean, microscopic dust particles can get into the scratches and negatively affect the result.

Paste GOI

You can deal with scratches on sunglasses using GOI paste. It is used for polishing products made of:

• gold,
• crystal,
• glass and more.

It is produced in small volumes. The price is about 100 rubles per 0.1 kg.

How to use GOI paste:

1. A small amount of paste is applied to the flannel material.
2. Polish the scratched lens.
3. Lubricate it with vegetable oil.
4. Wipe with a dry cotton pad until shiny.

To process lenses, use paste number 2 or 3. It contains abrasive particles and auxiliary components that carefully polish the surface, fill and smooth out irregularities. If you purchase paste under other numbers, there is a risk of damaging the glass.

Toothpaste

You can use toothpaste to remove scratches from glasses. Any composition will do. The only exception is tooth powder.

Procedure:

• apply the paste to the glass;
• spread it over the scratch with soft felt material, and then polish it in a circular motion;
• remove any remaining product with a damp cloth;
• Rub the surface until shiny with a piece of suede.

Polish

Polishes are based on soft wax (not to be confused with a hard wax candle), so they are able to mask small abrasions without harming the glass.

Mode of application:

1. Apply polish to the lens.
2. Rub with a soft cloth.
3. Lubricate the lens with Vaseline on top.
4. Remove any remaining product with a cotton pad.

When treating sunglasses, it is recommended to use polishes intended for glass and not for other surfaces.

Soda

It is not recommended to use baking soda in its pure form for glass processing. It will lead to new scratches. Before use, it is diluted in warm water to a pasty state.

Procedure:

• apply the prepared soda solution to soft matter;
• polish the surface with it;
• wash the lenses with warm water;
• wipe with a dry, clean cloth.

Special preparations

There are products on sale designed for glass processing. They are able to cope with minor damage, restore transparency and protect glasses from the appearance of new defects. Top 3 best lineups:

Hi-Gear

The product is suitable for processing:

• cars,
• mirrors,
• points.

The polish has a water-repellent effect. Price – 400 rubles.

Liquid Zeiss Lens cleaning spray

Spray removes stubborn stains and minor abrasions. The kit includes a glass cloth. Price – 500 rubles.

Ruseff Anti Scrath paste

The polish restores the damaged structure. Available in the form of a cream, it contains a mineral abrasive, so it must be used with caution. Price – 130 rubles.

When choosing a composition, you need to carefully study the label. The product must be suitable specifically for treating glass surfaces.If it is intended for a car body, then it cannot be used for glasses. It’s good if the kit comes with additional accessories, for example, polishing cloths.

What is suitable for plastic sunglasses?

You can remove scratches from plastic glasses using available means, including:

• wax,
• varnish,
• disc spray.

Plastic is not as brittle as glass, so it will be easier to polish.

Wax

You can use car wax to smooth the lens. It is better to choose a product that is suitable for caring for interior plastic.

Mode of application:

1. Rub the polish into the surface of the lens.
2. Achieve complete smoothing of defects.
3. Remove any remaining product with a dry paper towel.

Clear varnish

Only light-colored glasses with clear lenses can be treated with varnish. It is not used for dark lenses.

Procedure:

• Using a toothpick, apply transparent varnish to the damage;
• excess product is immediately removed with a dry cloth;
• When the varnish hardens, the lenses are polished to a shine.

The varnish must be applied precisely to fill the defect and not get on the surrounding surface.

Spray for CDs

The spray is available in convenient cans and is sprayed like an aerosol. It's very easy to use:

1. The can is shaken.
2. Apply the composition to the lens.
3. Rub with a soft felt cloth.

If there are a lot of scratches, then the procedure can be repeated.

Can I wear the accessory after removing scratches?

There is an opinion that wearing glasses after removing scratches from them is unsafe. This is due to two reasons:

1. The thickness of the lens coating is only 0.001 mm.During processing, it will be partially or completely removed, which will affect the change in the protective properties of the product.
2. When smoothing out scratches, the geometry of the lenses changes, which causes distortion of the optics. As a result, a person will see through such glass even worse than before.

Moreover, the listed defects are valid for expensive glass glasses. Cheap products have initially low protective properties.

Helpful information

Tips for removing scratches from glasses:

1. For processing, you can only use a soft cloth that does not leave lint behind.

   It can be suede, felt, flannel, or a cotton pad. It’s good if you have special wipes on hand for cleaning your optics.

2. The use of abrasive compounds is prohibited.
3. If there is any doubt about what result will be obtained after treatment, first you need to try the product on another product made of a similar material.
4. During polishing, only the outer side of the glasses is processed. After completion, wipe them with a clean cloth so that any remaining product does not get into the eyes and cause irritation.

If you are interested in how to remove small and deep scratches from various surfaces and objects, take a look at this chapter.

Conclusion

Both improvised and special products will help cope with minor surface scratches. When choosing a composition, you need to consider what material the glasses are made of.: made of plastic or glass.

It is necessary to work with precision, trying not to touch undamaged areas, so as not to harm the protective coating.