What is car plasticine with a rust converter and how to use it?

The headache of all car owners is rust, which can appear even on a new vehicle.

On sale you can find various compounds designed not only to save, but also to protect metal from corrosion.

One of these products is car plasticine with a rust converter - read the article about what it is and how this product works.

What it is?

Automotive plasticine with a rust converter is a plastic product that looks like ordinary plates for children's creativity.

Its main feature is its unique composition, thanks to which the product is actively used by motorists.

Automotive plasticine is highly resistant to water, it is not afraid of high air humidity, so it is used in those places that need additional protection from rust.

Drivers call autoplasticine a seam sealant that has the ability to transform metal oxides into a protective film. This tool can rightfully be classified as one of the types of converters.

The composition is non-toxic. It has heat and frost resistance, and also has good adhesion to any surface. The product's shelf life is unlimited.

Principle of operation

The principle of operation of car plasticine with a rust converter is quite simple. Its application to a specific area of ​​the car allows you to reliably seal the metal surface.

Thanks to this protection, contact with:

• water,
• by air,
• dirt,
• dust,
• melted snow,
• salt,
• reagents and other substances that contribute to the appearance of rust.

Plasticine can be safely applied to those areas that are already covered with rust, but they must first be cleaned.

Scope of application

On sale you can find car plasticine for treating thresholds, for applying to the bottom of a vehicle or to the body, but They cannot cover the entire body part of a car with it..

Autoplasticine is applied pointwise. Its main application is sealing seams. Although this recommendation is general, therefore, before you start using autoclay, you need to read the instructions for its use.

Main areas of use:

• treatment of cracked areas;
• covering areas where the seal does not fit well;
• brake pipe lubrication;
• sealing cavities prone to the accumulation of dirt and dust;
• treatment of hard-to-reach rusting areas;
• protection of car fenders from corrosion.

Almost any surface prone to oxidation can be treated with autoplasticine.

Features of use

You need to use autoplasticine correctly. If you deviate from the instructions, there is a high probability that the product will be ineffective. It is its irrational use that explains the fact that some drivers consider it useless.

Procedure:

1. Before you take the sealant in your hands, you need to lubricate them with glycerin.Some car owners use regular water, but this should not be done. Water reduces the adhesive properties of plasticine.
2. The amount of plasticine that will need to be used in a particular case is separated from the total mass.
3. The composition is kneaded in the hands to increase its plasticity. When this can be achieved, it is smeared on the surface of the metal.
4. All gaps and cracks must be carefully sealed with plasticine so that water cannot get inside.
5. You should work quickly with the composition so that it does not dry out.
6. After completing the procedure, hands should be washed thoroughly with soap.

The video will tell you about the use of autoplasticine:

How to choose a product?

When choosing car plasticine for your vehicle, preference should be given to the sealant that contains a rust converter. This will get rid of existing corrosion and prevent its reappearance.

Where and for how much to buy?

It is not difficult to purchase car plasticine with a rust converter. It can be purchased at automotive stores. If funds are not available, the order is placed online.

The cost depends on the manufacturer, region and place of purchase. The average price of car plasticine is about 100 rubles.

Top 3 best

There are several varieties of car plasticine on sale from different companies. The top 3 best products are as follows:

1. Car plasticine with rust converter “Effect”. It is produced by the company PoliComPlast. The cost of a bar weighing 500 g is 75 rubles.
2. Automotive plasticine with a rust converter from the Khimprodukt company. The cost of a bar weighing 300 g is 65 rubles.
3. Autoplasticine from the company "Polikomplast". The price for a bar weighing 500 g is 105 rubles.

Helpful information

In order for the use of plasticine in practice to be effective and achieve the desired result, The following recommendations must be followed:

1. When using autoplasticine for the first time, you must carefully study the instructions.
2. Autoplasticine can only be applied to a clean surface. It should not only be washed, but also degreased. Do not spread the product over wet metal.
3. The maximum heating temperature of autoplasticine is 25 degrees. If this range is exceeded, the product loses its plasticity.
4. The composition should be applied to those areas that are not exposed to direct sunlight. Otherwise, the product will simply melt.
5. On sale you can find plasticine of light and dark colors. It is better to choose a sealant that is suitable for painting the car. Then it will be less noticeable on the metal surface.
6. If you need to remove the plasticine, simply heat it up. To do this, just direct a stream of warm air onto the putty.

You can learn about methods and techniques for removing rust from a car in this section.

Conclusion

Car plasticine with a rust converter helps prevent corrosion on the bottom of the car, on its wings and other parts.

This inexpensive product acts as a sealant, enhanced by the properties of the converter. In order to achieve maximum effect, the composition must be used in accordance with the instructions.