Rating of the best rust converters, their cost, consumer reviews

To combat corrosion on metal, special products are used - rust converters.

They contain active components that interact with iron oxides, turning them into a protective layer, thanks to which the process of corrosion will be stopped.

Read the article about which rust converter to choose and which one is the best and most effective.

Which one is the best?

You can find several dozen types of rust converters on sale. However, there are some products that are in high demand among consumers because they work better than others. The TOP best are presented below:

Runway

Runway is a professional product that works within minutes. The product instantly penetrates into microscopic cracks and pores of the metal, stopping the further spread of corrosion.

Pros:

• speed of action;
• Possibility of use for any metal surfaces, except galvanized ones;
• ease of use both at home and in industrial conditions;
• can be applied to paint, enamel, varnishes (with the exception of water-based varnishes), epoxy compounds;
• affordable price.

The disadvantages include a strong chemical smell, due to which work must be carried out in a well-ventilated area.

Before applying the composition to the surface, it must be cleaned of dirt., from old peeling paint and rust flakes. It is recommended to rinse the metal with water, and when it dries, degrease it with a solvent.

The product is available in a volume of 30 ml, its cost is 91 rubles. You can also purchase a 120 ml composition at a price of 229 rubles.

Armasil

Armasil is an acid-free rust converter for processing ferrous metals. It is used to modify corrosion before concreting or painting the product.

The composition of the product is complex, it is presented:

• plant titans,
• corrosion inhibitors and stabilizers,
• functional additives.

Pros:

1. The product is non-flammable, does not contain acids or toxic substances.
2. It is possible to apply the composition even to a thick layer of rust.
3. Armasil can be used even in a cool room, but the air temperature should not be lower than +4 degrees.
4. Economical consumption, which is 0.1-0.15 kg per 1 sq. m.
5. After treatment, the product does not need to be washed with water.

Minuses:

1. Armasil can only be used for processing ferrous metals. It is used primarily for construction reinforcement.
2. The product is not available in spray form, so you must use a roller or brush to apply it.
3. The processing procedure takes at least 3 hours.

Before using the composition, it must be mixed thoroughly. The cost of the converter is 270 rubles.

Kudo

Kudo is a gel-like rust converter that adheres well to surfaces and does not smear. The product can be used both to remove rust and to prevent it. The composition is used to process new parts in order to protect them.

Pros:

• high adhesion;
• convenient use;
• affordable price;
• possibility of use for prophylactic purposes;
• quick effect - the second layer is applied 10 minutes after the initial treatment; to achieve the optimal effect, the product is left for 30-40 minutes.

A converter with a 15 ml brush costs 105 rubles.

Eltrans

Eltrans rust converter contains zinc, which provides additional metal protection. The composition is suitable for processing steel and cast iron products if the rust thickness on them does not exceed 80 microns.

Advantages:

1. High efficiency.
2. Economical consumption.
3. Fast drying.
4. Possibility of use at home.
5. Does not require rinsing.

Minuses:

1. Before application, high-quality cleaning of the metal surface is required, with its obligatory degreasing.
2. Do not apply the product to rust whose thickness exceeds 80 microns.
3. The air temperature when working with the composition should not be below +10 degrees.

Price per package – 311 rubles.

Yashim

Yaschim is a highly effective rust converter, which contains:

• an aqueous solution of several acids,
• inhibitors,
• phosphates,
• vegetable tannins,
• technical alcohol.

The product is used:

• in industry,
• at home,
• in construction,
• for removing rust from cars.

Pros:

1. Deep penetration into pores and cracks of metal.
2. High efficiency. Yashim copes even with a thick layer of rust.
3. Fast drying.
4. Affordable price.
5. Economical consumption.
6. Easy to apply.

The price for 0.5 liters of the composition is 33 rubles.

Permatex

Permatex is a liquid rust converter. After its use, a protective rubber-latex polymer film remains on the surface, which protects the product from the spread of corrosion.

Pros:

1. The product is non-flammable and non-toxic.
2. It can be used at temperatures from +10 to +32 degrees.
3. Ease of application.
4. Speed ​​of impact.
5. High adhesion to the surface.

The main disadvantage of the Permatex converter is its high cost, which starts at 680 rubles for 236 ml.

Tsinkar

Tsinkar is a well-known rust converter that has been produced since 1993.

It contains orthophosphoric acid, manganese and zinc salts. The composition can be used to treat any metal surfaces. After its application, a durable and reliable protective layer is formed on the metal.

The price of 1 liter of solution is 200 rubles. Will tell you more about the converter this article.

Laurel

The Laurel converter is a domestic product. It is universal, but most often it is used for car body processing.. The product is based on a mixture of organic and inorganic acids. The formula is enhanced with nonionic surfactants and phosphonates.

The price of a 310 ml converter is 115 rubles. Will tell you more about the converter this article.

Sonax

Sonax is used to treat small surfacesdamaged by rust. It can be applied to painted metal without first removing the paint.

The main disadvantage of the composition is its high cost with a small packaging volume. For 125 g of solution you will have to pay about 600 rubles. The costs will be especially noticeable when a large area needs to be treated. Read more about the converter in this article.

Hi-Gear

Hi-Gear is a highly effective rust converter that successfully copes with even extensive corrosion. It is convenient to use the product, as it is bottled with a sprayer. After processing is completed, a polymer film remains on the surface, preventing further oxidation of the metal.

The main disadvantage of the Hi-Gear converter is its high cost. Besides, the product requires mandatory rinsing. To do this, you need to use not ordinary water, but alcohol-based compounds. The average price of 1 bottle is 700 rubles.

Wurth

Wurth rust converter is a product from a German manufacturer. It contains oliphatic hydrocarbons, isobutane, propane and phenol.

The product cannot be called budget. A 300 ml bottle costs 430 rubles. Will tell you more about the tool this article.

Chemist

Chemist – rust converter from a domestic manufacturer. The product was developed taking into account Russian realities, which increases its effectiveness. The composition is suitable for treating any metal surfaces, modifying rust into a protective layer. The main active ingredient is orthophosphoric acid.

Its main advantages:

• affordable price,
• high efficiency,
• ease of use.

Minuses:

• pungent acrid smell,
• high toxicity of the converter.

The product in the form of an aerosol with a volume of 1 liter costs about 165 rubles. Read more about the tool here.

Astrohim

Astrochem is a Russian product produced by the company of the same name. On sale you can find several converters at once, which differ in their composition:

• with phosphates,
• with zinc,
• with crystalline hydrates and tannins.

However, the main active ingredient in them is phosphoric acid.

This is an inexpensive and effective remedy to fight rust. The average cost of the composition is 150 rubles per 500 ml. You can find out more about the converter Here.

Hairdryer

Rust converter Phenom contains:

• orthophosphoric acid,
• corrosion inhibitors,
• antioxidants and phosphates.

The product is applied to the metal surface only after preliminary cleaning and degreasing. The reaction starts instantly; after its completion, a protective film remains on the surface that does not require rinsing off.

The cost of the composition is 150 rubles. Read more about the tool Here.

Features of choice

When choosing a rust converter, The following recommendations should be taken into account:

1. To care for car parts and bodywork, it is better to use aerosol formulations. They are convenient to apply, especially when hard-to-reach areas need to be treated. Preference is given to the following compositions: Kudo, Wurth, Khimik.
2. If rust needs to be removed from a large area, use liquid products that are applied with a roller or brush, for example, Yashim.
3. To prevent liquid from draining from the surface, use gel-like products (Kudo).
4. For processing reinforcement or other ferrous metals, the Armasil converter is used.
5. If gentle rust removal is required, choose acid-free formulations, such as Wurth.
6. If the product is located in a hard-to-reach place, it is better to purchase a product that does not require rinsing. Such converters act as a primer on which paint can be applied (Sonax, Runway, Eltrans).

Find out everything you need to know about rust converters in this section.

Conclusion

Rust converters are modern means of combating corrosion. Their use makes it easier to care for metal products.

The main advantage of such compositions is that they not only remove corrosion, but modify it, due to which the oxides are transformed into a protective layer.