Review of primer-enamel for rust 3 in 1 Novbythim: advantages and disadvantages, cost, user opinions

foto22018-1Domestic primer-enamel for rust “3 in 1” Novbythim occupies a worthy place in the line of modern anti-corrosion and decorative coatings.

The experimentally tested chemical composition, clearly developed instructions for use, and many positive characteristics explain the high popularity of the product on the paint and varnish market.

Comparison with analogues, as well as user reviews presented in this article, allow us to evaluate the feasibility of choosing Novbytkhim 3 in 1 rust enamel primer.

Paint Features

The manufacturer of the product is JSC “New Household Chemicals”, known by the abbreviated name “Novbytkhim”. The company was founded in St. Petersburg in 1994.

The main direction of the company is the production of household and construction chemicals. The product range includes more than 60 items.

This number includes:

  • foto22018-2primers,
  • varnishes,
  • enamel,
  • adhesives,
  • stains,
  • putties,
  • sealants,
  • dyes.

The quality of the supplied products complies with GOST standards, which is confirmed by the Certificate of Conformity received by the company in 2013.

Primer-enamel “3 in 1” Novbythim against rust is one of the innovative developments of the St. Petersburg company. The emulsion performs three functions simultaneously:

  1. Blocks the corrosion process.
  2. Primes the surface.
  3. Creates a decorative coating.
Since primer enamel replaces three products at the same time, it is possible to reduce surface treatment time, reduce the labor intensity of the process, and at the same time obtain a presentable appearance of the product.

The manufacturer gives the emulsion the following characteristics:

  • weatherproof;
  • quick-drying;
  • waterproof;
  • elastic;
  • heat resistant;
  • economical.

Application area

Multicomponent primer-enamel Novbytkhim is allowed to be used for metal objects located indoors or outdoors. They can be either painted or unpainted. The product is ideal for application to rusty surfaces if the corrosion layer does not exceed 100 microns.

foto22018-3The scope of Novbythim is quite wide. It can be painted:

  • fences,
  • gratings,
  • pipes,
  • factory and warehouse equipment,
  • metal structures of bridges and pipelines,
  • car parts and body.

Primer enamel should not be used to cover heated surfaces indoors. If this rule is ignored, a specific unpleasant odor may appear. Objects previously painted with nitro enamel (NC) also fall under the taboo. The nitro paint coated on top with an anti-corrosion primer swells and peels off.

Composition of the product

The primer-enamel formula was developed in Novbythima's own chemical laboratory. The final composition includes several artificial components:

  • synthetic resins;
  • plasticizer;
  • corrosion blockers;
  • healthy supplements;
  • solvents.

Solvents of organic origin are used in paint emulsions. This can be toluene, acetone or xylene. Corrosion inhibitors contain pigments that determine the color of the primer.

The multicomponent composition determines the long shelf life of the packaged primer-enamel. It is 36 months from the date of production.

Product line

The range of Novbytkhim paints and varnishes, which combine the “3 in 1” function, includes 11 shades. In addition to the classic white and black colors, the palette includes:

  • grey,
  • dark grey,
  • brown,
  • brown-red,
  • red,
  • ocher,
  • yellow,
  • dark green,
  • blue.

Colored, black and white primer enamels give a matte effect after drying.

foto22018-4

In addition to the universal primer-enamel “Novbythim” for rust “3 in 1”, the manufacturer offers several similar products that differ in composition and application. The catalog includes “3 in 1” primer-enamel latex “Chief Technologist”, as well as anti-corrosion enamel for metal “Chief Technologist”.

foto22018-5
foto22018-6

Instructions for use

To obtain a high-quality result, it is important to adhere to the technology recommended by the developer. If you deviate from it, problems with coating adhesion and corrosion protection may occur.

The surface treatment algorithm includes several points:

  1. The product is washed from dirt, dust, and grease stains.
  2. Rusty deposits are removed mechanically.
  3. Clean off all the old peeling paint.
  4. Clean the previous layer of paint until it is matte.
  5. Degrease the surface to be treated.
  6. Dilute the primer-enamel to the desired consistency.
  7. Apply Novbytkhim to the prepared area.
  8. The fresh coat is left to dry for one hour.
  9. Apply primer enamel a second time.
  10. Leave for two hours to dry completely.
You can paint products using a brush, foam roller or paint sprayer. In the latter case, the primer-enamel must be made more liquid. This will help create an even, thin layer.

For efficient and economical application the consumption rate should be taken into account, it is 80-120 g/sq. meter with a single layer coating.

To dilute Novbytkhim enamel, use a proprietary xylene-based product, Thinner No. 1, or solvents R-4, R-5. These liquids can also be used to wash soiled objects, brushes, rollers and other tools.

All work with Novbytkhim primer-enamel must be carried out at a temperature not lower than -10 and not higher than +30 degrees.

If the metal was previously painted with an NC composition, then the paint must first be completely cleaned off. If there are doubts about the quality of primer-enamel adhesion, it is recommended to conduct a test before completely painting the entire product. To do this, apply the product to a small locus, wait until it dries completely and check the quality of the coating.

If swollen bubbles are observed, it means that the old paint must be stripped to zero. If necessary, it is allowed to apply other paint emulsions on top of the dried Novbytkhim primer-enamel.

It can be:

  • oil,
  • water-dispersed,
  • PF, HV paints and enamels.

Where and at what price to buy?

Enamel primer from Novbythim is sold on the company’s official website, in the centers of partner companies, hardware and construction stores, and online stores. JSC "New Household Chemicals" distributes its products throughout all regions of Russia and neighboring countries.

foto22018-7Primer-enamel goes on sale in different packaging:

  • cans 0.4 l.
  • 1 liter jars
  • cans 3 l.
  • Euro bucket 20 l.
  • barrels 200 l.

By agreement with the customer, Novbytkhim meets the wishes and packages paint and varnish products in other convenient containers.

The price of the product depends on the volume of the container, the cost of anti-corrosion agents and the financial policies of distributors. It is 300-400 rubles for a liter jar, 900-1100 rubles for a three-liter jar.For larger containers and for bulk purchases, a reduction factor applies.

Top 3 analogues

Products that combine a rust converter, primer and decorative enamel are produced by many foreign and domestic manufacturers.

An alternative to Novbythim can be no less effective and high-quality anti-corrosion paints:

  1. Prestige. A Russian-made product produced by the Prestige company. Primer enamel has a longer final drying time compared to Novbytkhim (6 hours) and a slightly higher consumption (125-180 g/sq.m.). But Prestige wins due to its lower cost: a two-liter jar costs about 400 rubles, a five-liter jar costs 1,400 rubles.
  2. Dali. The developer and supplier of primer enamel is LLC NPP Rogneda. Before use, the painted product is dried for 7 hours. The advantages of the product include economical consumption - up to 100 g/sq.m. and a wide color range in the line of smooth and hammer enamels. The downside of Dali is the price: a 2-liter jar costs 1200-1400 rubles, a 10-liter container costs 5800-6600 rubles.
  3. Lakra. Primer enamel from the Lakra-Sintez company is characterized by a long drying period (10 hours). However, other indicators coincide with Novbytkhim. Thus, the consumption is within the limit of 80-120 g/sq.m., and the price for a 0.8-liter jar is on average 400 rubles.

Reviews

foto22018-8Different products produced by Novbytkhim deserve different ratings from users. In general, the products are characterized as high quality, effective and meeting the stated requirements.

Users evaluate the “3 in 1” primer enamel differently, only 45% of them believe that it is worthy of a recommendation for purchase and use.

The positive aspects include price, paint quality, durability, efficiency, durability and good rust paintability even without thorough cleaning. The disadvantages of enamel include a strong pungent odor, which indicates its toxicity.

Consumers who gave negative reviews report a very unpleasant odor that can be felt even when working outside. The product exhibits poor adhesion to surfaces, low washability of brushes from paint residues.

You will find all the most important and interesting things about 3-in-1 rust-resistant primers in this section.

Conclusion

Novbytkhim primer enamel has numerous positive features regarding ease of use, storage, and operation of painted products.

The product values:

  • triple action,
  • variety of colors,
  • possibility of applying over old paint,
  • efficiency and budget.

But before choosing this paint and varnish product, it is recommended to compare it with analogues and read the reviews.

Discussions

How to remove odor

Scratches

Yellow spots