Always at hand, or how to remove rust from a toilet at home using folk remedies

foto21200-1Keeping your toilet bowl clean is only possible with regular cleaning.

To prevent rusty streaks, you can use not only store-bought medications, but also available home remedies.

In this article we will tell you how to remove rust from a toilet using folk remedies at home.

Where do rust stains come from?

foto21200-2Traces of rust on ceramics are the result of metal oxidation. The source may be a main pipeline that is in poor condition.

In this case, corrosive particles from non-galvanized water pipes enter the toilet, leaving noticeable reddish marks when the water is regularly drained.

Water with a high iron content and rusted fasteners inside the tank also contribute to the appearance of rusty streaks. Without proper care, traces of rust become not only noticeable, but also difficult to remove.

What makes the situation worse, in terms of maintaining cleanliness, is the quality of the plumbing itself:

  • unevenness on the ceramic surface;
  • microcracks.


Damage may occur as a result of:
  • non-compliance with manufacturing technology;
  • when exposed to contrasting temperatures during operation, as well as improper care.
On rough, uneven surfaces, particles of rust and lime are more likely to linger, which over time form a persistent coating.The smoother and more uniform the surface, the easier it will be to clean.

How to clean the surface?

When starting the cleaning process, it is necessary to carry out preparatory measures:

  • take care of protective equipment,
  • prepare the brushes,
  • washcloths,
  • rags.

Please note that not all home remedies are equally effective and safe.

Lemon acid

Citric acid is one of the most accessible ways to remove rust. Its disadvantage is its insufficiently high performance. If there is a lot of rust and the marks are old, then it is better to use another recipe.

foto21200-3Instructions:

  1. Pour the powder onto a rag moistened with water.
  2. Rub the areas with rust.
  3. Leave for 1.5-2 hours.
  4. Rinse off with a brush.

You should not replace citric acid with lemon juice, as the effect of such a procedure will be even lower. Read more about how to use citric acid in the fight against rust. Here.

Vinegar and lemon

The result of using citric acid can be enhanced if you combine it with vinegar in equal proportions.

Using this composition is not difficult:

  • using a rag you need to apply the prepared product to the earthenware;
  • leave to act for a couple of hours;
  • rub;
  • wash off.
Vinegar can also be used as a stand-alone cleaning product. If the source of rust is a tank, then you can pour 1 glass of essence into it overnight.

You can learn more about using vinegar to remove rust. here.

Ammonia

foto21200-4Ammonia can be used to clean rust in its pure form, or diluted with hydrogen peroxide. In the latter case, take 5 parts of ammonia for 1 part of peroxide.

Work algorithm:

  1. The active substance is applied to the drips.
  2. Leave for half an hour to an hour.
  3. Clean with a brush.
  4. Wash it off.

Soda

Baking soda is one of the harmless products that can be used to clean the toilet. It disinfects and cleans due to its abrasiveness.

Use soda by diluting it with water (or hydrogen peroxide) to a paste.. It is recommended to apply the resulting product to stained areas. After the composition dries, it is washed off with water, and the stains are rubbed with a brush.

Electrolyte

Battery electrolyte is another product that is suitable for washing away rust marks.

Procedure:

  1. Apply the drug to the area that requires cleaning.
  2. Wait a quarter of an hour.
  3. Rinse.

Working with electrolyte requires increased attention and compliance with all requirements for protection from a toxic drug.

Do not allow liquid to come into contact with unprotected skin or plastic objects. This method is not suitable for plastic pipes.

Oxalic acid

The acid is available in powder form. For the drug to work, It is recommended to work according to the following algorithm:

  • foto21200-5moisten the rag with water;
  • apply oxalic acid to a rag;
  • wipe areas with streaks of rust, if possible, leave a rag on the affected area;
  • stand for 10 minutes;
  • wipe with a cloth again;
  • remove the rags;
  • wash off.

Toothpaste

To treat traces of rust, a paste with a bleaching effect is better suited. It has a mild abrasive effect on stains. It is applied by rubbing into the rust and left for at least half an hour. After this, the paste is washed off with water, helping yourself with a brush.

White

Chlorine bleach not only cleans, but also disinfects the toilet. Work should only be carried out with good ventilation (exhaust hood turned on or a draft).

To achieve the effect, white is poured into the toilet so that it gets on the traces of rust. You can leave this solution to act for several hours, even overnight.

Cola

Using Coca-Cola to remove rust is one of the common home recipes. Its effectiveness is based on the inclusion of orthophosphoric acid in the drink.

foto21200-6Procedure:

  • pour at least 1 liter of drink into the toilet;
  • If particularly dirty areas are located under the rim, you can soak a rag in cola and place it directly on top of the stains;
  • leave for an hour or longer;
  • remove the rag;
  • rinse off using a brush.

It is not advisable to replace Coca-Cola with another carbonated drink, as the effect may be reduced. Most sodas contain not phosphoric acid, but citric acid, and in a very low concentration. Read more about the method of cleaning rust using Coca-Cola in this article.

Advantages and disadvantages of improvised means

Folk cleaning products have many advantages. These include:

  • low cost;
  • availability of purchase;
  • easy to use;
  • some of them are environmentally friendly and safe (soda, citric acid, etc.).

Disadvantages of use home recipes:

  • not always highly effective, especially in advanced cases;
  • the procedure may need to be repeated many times, which increases the cost of the process;
  • It is required to use personal protective equipment when using certain products (electrolyte, oxalic acid, etc.).

Prevention of plaque

In order to avoid the stress associated with cleaning a dirty toilet with old stains of rust, it is necessary to put into practice preventive measures.

These points include:

  1. foto21200-7Timely elimination of water leakage from the tank.
  2. Installation of a purification system (filter) for incoming water if its quality at the inlet is not satisfactory.
  3. Carry out regular toilet cleaning. For this, chlorine bleach or a special product can be used.
  4. The use of special tablets for rust and lime, which are placed in the tank or attached under the rim of the toilet. They have a fairly long-lasting effect - up to several weeks.
  5. Mandatory flushing of water after using the toilet will prevent the formation of limescale and urinary stone, which complicate the care of plumbing, forming persistent stains involving rust.
The more neglected the condition of the toilet before cleaning, the more difficult it will be to deal with the contamination.

10 recommendations

The following tips will help you clean your plumbing:

  1. All work must be carried out wearing protective equipment. Minimum - wear rubber gloves. This will protect your hands from the drugs used during processing. It is also advisable to use a waterproof apron to protect clothing.
  2. Any cleaning work must be carried out in conditions of good ventilation.
  3. If you plan to replace the toilet, then porcelain plumbing has the best performance qualities. It has a smoother and less porous surface compared to earthenware.
  4. foto21200-8Don't ignore preventive measures. In their absence, the appearance of plaque is a matter of time.
  5. For old rusty stains, the cleaning process with any product may not help the first time, and will have to be repeated several times.
  6. You should not use several products from different recipes at once. Not all of them are compatible with each other.
  7. For cleaning, you can use not only a brush, but also a sponge with a hard side, as well as brushes. Rags are less effective as a cleaning tool.
  8. You should not try to scratch the plaque, use blows or other excessively active actions, as the use of force can lead to cracks in the ceramic object.
  9. If water is leaking from the tank and the breakdown has not yet been repaired, then for the cleaning period it is advisable to turn off the water supply and drain the water that is already in the tank. This will prevent cleaning products from washing away.
  10. The application of any of the products should be generous, completely covering areas with rusty spots.

You will find all the most important information about methods and means for cleaning a toilet from rust. Here.

Video on the topic of the article

How to remove rust from a toilet, video tip:

Conclusion

It is quite possible to remove rust from a toilet even using folk recipes. The choice of method should take into account the neglect of the situation, since some mild preparations are not able to eliminate serious long-standing contamination.

Discussions

How to remove odor

Scratches

Yellow spots