On the toilet

Rust on the surface of the toilet appears due to the ability of water to dissolve and transport particles.

Iron impurities obtained from the soil and corrosion products from the walls of non-galvanized pipes travel along with the liquid. As a result, rusty streaks appear on the perfectly clean surface of the plumbing fixtures.

Another reason is a malfunction of the tank and its leakage. Inorganic pollution must be combated immediately, using the experience of professionals and housewives.

We will tell you in this article how to clean a toilet from rust and get rid of urinary stones and limescale at home.

Folk remedies for cleaning rust stains

To clean a toilet bowl from rust, you don’t have to buy expensive industrial chemicals. The funds that are found in every home will give a positive result without a hit to the family budget.

Read about the use of folk remedies to get rid of rust on the toilet in this article.

How to remove rust with baking soda and vinegar?

The components found in every kitchen are universal. Often used to clean various surfaces due to their properties:

• baking soda (lye) is an effective bleach that absorbs foreign odors;
• vinegar (acid) – destroys limescale, removes rust, various deposits, neutralizes unpleasant odors, disinfects.

Step-by-step instructions for use:

1. Sprinkle a thick layer of baking soda onto the toilet bowl.
2. Treat areas with increased contamination with a dampened sponge.
3. Leave for 30-40 minutes.
4. Pour vinegar (100 g) into a spray bottle and spray on a surface covered with soda.
5. As soon as the reaction begins (excessive foaming with hissing), clean the toilet with a brush.

Vinegar and soda will not only quickly remove rust, they will return the whiteness of the earthenware surface and disinfect it.

How to get rid of streaks using ammonia and hydrogen peroxide?

Inexpensive components can be purchased at every pharmacy. To clean you need:

• prepare a solution of ammonia and peroxide in a ratio of 1 to 20;
• moisten a sponge in the resulting liquid and treat areas with rust;
• leave for several hours;
• clean the bowl with a brush;
• rinse with water.

For deep cleaning, it is better to apply the solution at night.

How to wash with White?

A liquid that contains chlorine and alkali easily removes rust, plaque, and disinfects the surface of the toilet, but is fundamentally not suitable for the flush cistern.

How to use:

1. Remove water from the toilet; the surface must be dry.
2. Using a spray bottle, spray the product onto the toilet bowl, paying attention to hard-to-reach areas.
3. Close the toilet lid and wait 20 minutes.
4. Treat the surface with a brush.
5. Flush the water several times.

Chlorine vapors are harmful to the respiratory tract.A respirator and good room ventilation will help avoid harmful effects.

How to clean with a corrosion neutralizer?

A budget product that is sold in hardware or paint stores. The main component is phosphoric acid, which easily removes rust, plaque and other types of contaminants.

Instructions for use:

• pour liquid into a spray bottle;
• spray on the toilet bowl, leave for 5 minutes;
• treat the surface with a brush;
• rinse thoroughly with water.

How to remove traces of Coca-Cola?

An effective way to combat metal corrosion products is a popular drink. It is enough to pour 1-1.5 liters of liquid into the toilet and tank for 1 hour and flush the water several times. There will be no trace of rust left. A packet of citric acid will help enhance the effectiveness of the product.

Industrial production assistants

Toilet bowl cleaners are available in the form of solutions, powders or gels. The last category is considered the most convenient due to its thick consistency and specially shaped bottle. It allows you to clean dirt in hard-to-reach places.

All products have almost the same composition, the effect of surfactants is enhanced by the presence of:

• acids that remove rust;
• alkali, which breaks down organic contaminants and fat;
• chlorine, which has an antimicrobial effect and the ability to neutralize odors.

The choice depends on the preferences of the housewife, the characteristics of surfaces and types of contamination. Read more about industrial products for cleaning toilet bowls from rust. Here.

Alkaline

Caustic soda (lye) removes all types of contaminants well. Cleaning is carried out without effort and damage to surfaces.

Recommended use:

1. Domestos – a gel that will deal with rust on the surface of the toilet in 10 minutes, refresh and disinfect. For old stains, it is recommended to leave the product overnight. Price from 180 to 240 rubles per 1 liter.
2. Lima Professional – whitening gel for the toilet, removes all types of dirt, destroys odors and microorganisms. Price from 120 to 180 rubles per 1 liter.
3. Chistin 3 in 1 for plumbing – an inexpensive gel for cleaning and disinfecting ceramics, effective in combating corrosion products, and has antibacterial properties. Price from 70 to 130 rubles per 750 g.

Abrasive

The category includes powders, pastes, suspensions that contain grinding particles and remove contaminants using mechanical action. Suitable for cleaning toilets:

1. Pemolux Soda – cleaning powder to combat stains with a refreshing effect. Price from 40 to 60 rubles per 480 g.
2. Chistin lemon – universal powder for cleaning surfaces with a refreshing scent. Price from 35 to 60 rubles per 400 g.
3. Comet – a powder containing chlorine with an antibacterial effect removes all types of contamination from the surface of plumbing fixtures. Price from 60 to 100 rubles per 475 g.

Abrasives act more slowly and require effort. Another disadvantage is that they can leave microcracks on the surface, in which deposits will accumulate more quickly.

Acid-containing

Acid-based household chemicals give good results, but require caution when working due to their aggressive composition. The most popular:

1. Cillit Bang – a thick gel based on hydrochloric acid in a convenient package with a thin spout. Successfully fights against any contamination of the toilet thanks to its aggressive composition. Price from 180 to 250 rubles per 750 ml.
2. Toilet duck 5 in 1 – a gel containing hydrochloric acid in a convenient bottle, with a child-proof cap. Removes rust from the surface, disinfects, refreshes. Price from 120 to 200 rubles per 0.5 liter.
3. Comet – caustic gel, the main active ingredient sulfuric acid copes with any contaminants. Economical and effective, retains results for a long time. Price from 100 to 180 rubles per 450 ml.

How can you clean the inside of the tank at home?

If a rusty streak appears on the surface of the toilet bowl, it is necessary to urgently clean the tank, otherwise repeated stains cannot be avoided. The above products are suitable for this, but preference should be given to a less aggressive composition so as not to damage parts made of less resistant materials.

Instructions:

• turn off the water;
• disassemble the tank;
• wash each part using a special product;
• assemble the structure and drain the water.

If the cleaning agent is not used correctly, the outlet valve, made of rubber, may begin to leak water after several cleanings. You can learn more about cleaning a toilet tank from rust. here.

Preventive measures

The appearance of rust can be prevented. To do this you need:

1. Check the operation of the tank and carry out repair work if necessary.
2. Use special tablets and cubes 2-3 times a week, which, when dissolved, give the water a pleasant color and smell, disinfect surfaces with each rinse and destroy plaque.
3. Avoid stagnation of liquid in the tank, use the drain button more often.
4. Install a general water filter to remove iron impurities.
5. If necessary, replace old pipes.
6. Use a brush regularly to remove organic residues and plaque.

Advice from professionals

In pursuit of perfect cleanliness, housewives should not forget about their own safety. The aggressive composition of household chemicals requires compliance with the following rules:

• before cleaning the toilet, you must wear rubber gloves that will protect the skin of your hands from contact with chemicals and microorganisms;
• use an oilcloth or plastic apron, a respirator to protect clothing and the respiratory tract;
• when working with products that have a strong odor, emit gas or chlorine, it is necessary to ensure an influx of fresh air into the room;
• you need to start by removing water from the tank; a ladle with a long handle is suitable for this - on a dry surface, components that destroy contaminants work better;
• If the cleaning solution comes into contact with the skin or mucous membranes, they should be washed immediately.

During this process, you should not bend low over the toilet bowl to avoid getting the solution in your face and eyes.

Conclusion

Keeping the toilet clean is an important mission for every housewife, which will preserve the health of the household. For a long service life and a white toilet, it is necessary to take preventive measures and regularly clean the surfaces and the tank.

When choosing products, avoid the abrasive group if possible, so as not to create microcracks, in which sediments and microorganisms will settle faster.Use chlorine-containing gels and liquids with caution so as not to harm your health.

If the stains cannot be removed, you should consider replacing the plumbing fixtures. Perhaps its service life has expired.