Secrets of experienced mothers: how can you wipe a hand off a doll?

Marks from a ballpoint pen can be wiped off the doll’s face and body using folk remedies and household chemicals.

Suitable for cleaning are bleach, vinegar, potassium permanganate, all types of dishwashing detergents, glass cleaners and match heads.

It may take 30 minutes to deal with fresh marks, but old stains will dissolve in about 2 days.

How to wipe off pen marks from a doll (rubber, plastic, Barbie, etc.) and remove ingrained ink, we will tell you in this article.

How to remove marks at home?

Ballpoint pen ink contains oils that can penetrate deeply into soft plastic, vinyl, or foam rubber. To quickly and effectively clean your favorite doll at home, you can use available products.

Lemon juice

From dolls made of rubber or vinyl, fresh ink stains can be removed with a small slice of lemon or a pinch of citric acid.

The exposure method is suitable for fresh dirt, for the most exclusive toys, since the juice will not lighten the rubber.

Do I need to take 1 piece of lemon or? tsp acids. Rubbing process:

• remove the outfit from the toy so as not to spoil the material;
• wipe the doll with a dry cloth;
• walk over the spot with a fresh cut of a juicy lemon or citric acid diluted in water.

To protect the toy from damage, it is better to first wipe the area behind the doll’s ear, at the back of the hairline, or in any other inconspicuous place.

Melamine sponge

The melamine sponge looks like a piece of white foam rubber and feels like glass or sandpaper. When wet, the sponge becomes pliable and soft. The surface is covered with small tendrils, which enhance the grip on dirt.

Stain removal process from the handle with a melamine sponge:

1. If the contamination is small, you need to cut off a small part from a whole piece of sponge with scissors.
2. Soak the sponge in water and squeeze to remove as much moisture as possible.
3. Wipe away ink marks with the tip of a sponge.
4. Rinse off the residue and repeat the procedure if necessary. For small marks, the tip of the sponge can be sharpened with scissors.

Do not apply any household chemicals to the surface of the sponge, as this may provoke a dangerous chemical reaction.

An effective solution of bleach with vinegar

The combination of vinegar and bleach has a powerful cleansing effect. The method is suitable for cleaning a doll’s body or face without factory makeup. The smell of the product is quite pungent, so it is better to carry out the manipulation outside or in a ventilated room.

Required:

• 2 tbsp. l. table vinegar 9%;
• 2 tbsp. l. whiteness.

Removal step by step:

1. Mix vinegar and bleach in a non-metallic container. It is important not to inhale fumes from the chemical compound during the cooking process.
2. Dip a cotton pad or small ball of cotton wool into the mixture.
3. Apply to the problem area.
4. Wrap in cling film or plastic bag.
5. Leave the toy for at least 15 minutes for fresh stains, for 2 hours for old stains.
6. For greater efficiency, place the toy on a hot battery.
7. If there is a large area of ​​contamination, make a bath in equal parts and immerse the doll completely in it.

The video will show you how to wash the pen off the doll’s face:

Stain removers: Domestos, Vanish

Stain removers are most effective for removing gel pen from the rubber parts of the doll. For cleaning you will need 3 tbsp. l. stain remover and 1 liter of warm, but not hot water.

Ink washing method:

1. Stir stain remover in heated water. It is important that the water is not hot, since when it comes into contact with boiling water, the rubber is deformed.
2. Immerse the doll in the bath until it is completely covered with liquid.
3. Leave to act for 20 minutes, then wipe the areas with ink with a sponge.

If there is a lot of paste, it is recommended to repeat the procedure.

Remove with vegetable oil

Vegetable oil softens the rubber texture and allows cleaning agents to penetrate deeper into the dirt.

Required:

• 1/2 bar of alkaline laundry soap 72-80%;
• 3 tbsp. l. oils;
• ? l drinking water.

Cleaning process:

1. Grind a bar of laundry soap with a grater, mix with oil and add water.
2. Heat the solution until hot, stirring until the soap dissolves.
3. Immerse the doll without a wig in a warm bath and leave for 20-40 minutes.

Wipe contaminated areas with a toothbrush and rinse with warm water.

Acetone or nail polish remover

Acetone-free nail polish remover is an all-purpose cleaner that can easily remove ink from fabric, leather, and rubber.

Removing traces:

1. Dip a cotton swab into nail polish remover and squeeze out a little.
2. Apply the liquid in a thin strip exactly to the stained area.
3. Repeat the manipulation 3-4 times, since with each treatment the color of the spots will become duller.

Potassium permanganate, vinegar, hydrogen peroxide

A mixture of potassium permanganate with hydrogen peroxide and vinegar is suitable for old stains. The components of the composition complement each other's effectiveness and enhance the effect.

Required:

• 1 glass of table vinegar;
• ? tsp potassium permanganate;
• 1 tsp. hydrogen peroxide.

Process in stages:

1. Potassium permanganate dissolves only 6%, so when combined with vinegar, the solution acquires a rich purple hue.
2. Heat the solution until warm, remove from the stove.
3. Dip a cotton swab into the mixture and apply to the stain.
4. Leave the product on for 15-20 minutes, check for traces of the rod.
5. The area from the handle will turn out intensely brown.
6. Dip a cotton swab or pad into peroxide and wipe the desired area.

If a mark remains, repeat the procedure.

Toothpaste

If the toy is made of white rubber, you can carefully remove ink marks with tooth powder or toothpaste. Ingredients: 1 tbsp. l. powder or 1 tbsp. l. menthol paste without dye.

Process:

• squeeze out the paste or apply powder to the brush;
• wipe away dirt;
• leave the mixture for an hour to act.

Thoroughly clean the material with a brush and rinse with clean water.

Dish detergent

Dish soap removes fresh stains from vinyl and rubber doll bases.

Procedure:

• Slightly dilute the dishwashing detergent with water to a paste;
• place the doll in the solution;
• leave the toy for 30 minutes, wipe with a brush until the stain disappears;
• Rinse the product with clean water.

Laundry soap

The alkali of laundry soap allows you to penetrate deep into the texture of the material and remove dirt without harming the toy.

Cleaning process:

1. Rub the traces of the paste with a bar of laundry soap.
2. You can use a toothbrush.
3. Rinse off any remaining soap with water.

Gasoline or turpentine

It is better to work with turpentine or gasoline while wearing gloves and a respirator.

Required:

• 2 tbsp. l. gasoline or turpentine;
• 2 tbsp. l. ammonia.

Cleaning:

1. It is necessary to use only purified gasoline (Nefras).
2. Mix turpentine or gasoline with ammonia in equal proportions.
3. Treat the ink on the doll with a gasoline mixture.

Finally, wash the toy with warm soapy water.

Box of matches

Sulfur makes stains easier to remove.

Impact process:

• moisten the sulfur head of a match with water;
• scratch the ink mark with sulfur;
• if necessary, wet and use a second match.

Remove any remaining wax with a clean, soft cloth.

Baziron AS

“Baziron AS” is an ointment for facial acne based on benzoyl peroxide. The product is especially effective at removing old ink stains.

Removing traces from a ballpoint pen:

1. Lubricate the mark from the pen on the doll’s head with “Baziron AS”, without protruding beyond the limits of the contamination.
2. It is important not to get the product on the eyes, eyelashes or hair of the toy, as they will lose pigment.
3. Place the doll on a flat surface.
4. Place a lamp or table lamp nearby at a distance of 10 cm and direct the light onto the spot.
5. Leave in this position for 2 hours.

The cost of Baziron AS is about 600-700 rubles, so it can be replaced with more affordable drugs Oxygel or Ugresol.

Flucinar

Flucinar ointment is suitable for removing ballpoint pen ink. The cost of the product is about 20 rubles per 15 g.

Removal:

• apply ointment to problem areas of the toy;
• place the doll in the sun;
• The product is very greasy, so it will start to flow under the rays; you should not apply a large amount.

After an hour, wash off any remaining product with soapy water.

Hair fixation spray

Hairspray can quickly remove only fresh ballpoint marks.

Cleaning process:

1. Spray varnish onto the contaminated area.
2. Leave the toy for 5-7 seconds.
3. Blot the area with a napkin, do not rub.

Repeat the procedure 3-4 times until the stain disappears.

How to remove Barbie from your face without washing off your makeup?

Removing marks from a ballpoint pen with aggressive means can damage the factory make-up of the toy. In order not to wash off your makeup, you need to choose gentle products:

1. Toothpaste Will clean stains but won't damage factory makeup paint.
2. "Baziron" or "Ugresol" – preparations that lighten ink marks. The products will scrub off the paste, but the colors will remain if the doll is made of high-quality material.
3. Strong hold varnish will allow you to wipe off the ink in a gentle manner.

It is important to remember that if the toy is made of low-quality materials, the makeup may smudge or fade.

How can you not wash off ink and gel?

If the doll is exposed to the wrong chemicals, the material may deteriorate. Common mistakes:

1. Colored dolls such as Monster High, Winx or Lol lose their paint when in contact with white. Lilac colors will turn grey, pinks will turn dirty grey, reds will become splotchy.
2. Exposure to vinegar will cause the white vinyl to turn yellow.
3. The hair and eyelashes of toys should not be covered with cleaning products, as their texture will weaken. After 1-2 days they may break at the base.

Final table

You will find many useful tips and recommendations on removing pen ink from various surfaces and objects. here.

Conclusion

It is better to remove marks from a ballpoint pen immediately after application, since the ink does not have time to penetrate deep into the pores of the material. Rubber cleans best, while vinyl requires a more gentle treatment.

Aggressive household chemicals can harm the material and factory makeup of the toy., so it’s better to do the first test on an inconspicuous area of ​​the doll.