Methods and recipes for descaling a thermopot at home

foto18977-1The thermopot successfully combines the functions of an electric kettle and a thermos. The water in it boils quickly and remains hot for a long time.

In order for the device to function properly, limescale must be removed from it regularly.

Read the article about how to descale a thermopot at home using household chemicals and proven folk recipes.

How to remove using folk remedies?

To get rid of scale, you don’t have to immediately go to the department with household chemicals. You can cope with salt deposits using folk recipes.

Lemon acid

Citric acid is a universal solvent for salt deposits, allowing you to remove even a thick layer of scale.

Procedure:

  1. foto18977-2Pour citric acid into the device and add water at the rate of 10 g per 1 liter of liquid.
  2. Bring the solution to a boil.
  3. Leave for half an hour to take effect.
  4. Drain the solution and walk along the inner surface of the thermosweat with a foam sponge.
  5. Rinse the device, fill it with clean water, boil and drain. After this, you can use it as usual.

If it was not possible to deal with a thick layer of plaque the first time, the procedure can be repeated again. The preservative is harmless to the thermopot, so it is used without fear of damaging the device.



The video will show you how to clean a thermopot from scale with citric acid:

Vinegar

“Grandma’s recipe” for fighting scale involves using table vinegar.Although the method is ancient, it eliminates scale from modern thermopots 100%.

Procedure:

  • water is poured into the device so that it covers the entire layer of scale;
  • pour vinegar into it at the rate of 50 ml per 1 liter of water;
  • bring the product to a boil;
  • turn off the device, leave the composition for 2 hours with the lid open;
  • drain the product, rinse the thermopot and boil clean water in it.
Vinegar emits a pungent odor when heated. Therefore, the procedure must be carried out in a room with good ventilation. Also, do not bend low over the device and inhale acid fumes.

Ascorbic acid

Vitamin C helps get rid of scale. Like any other product containing acid, ascorbic acid loosens salt deposits, so they can be easily removed. The method cannot be called 100% effective, but you can deal with a small layer of scale using this recipe.

Procedure:

  1. foto18977-3Grind the tablets into powder. For 1 liter of water you will need 1 tablespoon of crushed ascorbic acid.
  2. Pour the powder into the device, fill it with water and bring to a boil.
  3. Leave for 30 minutes.
  4. Pour out the solution and rinse the thermopot with clean water.

The tablets can be used as often as necessary, as they are not capable of damaging the device. However, this method is more suitable for preventing plaque formation.

Soda

Carbonated water containing phosphoric acid will help get rid of scale. It could be:

  • Sprite,
  • Fanta,
  • Coca Cola.

In terms of efficiency, they are not inferior to professional cleaners, so they help cope with even the most difficult stains.

Procedure:

  • pour the drink into the thermopot;
  • leave for half an hour to release gases;
  • bring the product to a boil (do not close the lid so that the soda does not overflow);
  • leave until cool;
  • drain the drink and rinse the device with clean water.
If the thermopot is made of plastic, it is recommended to use Sprite. Using Cola or Fanta may stain the device and require repeated cleaning.

Brine

All opponents of household chemicals can use cucumber pickle to clean the kettle. Its composition is absolutely harmless, and its effectiveness is not inferior to professional cleaners. This is not surprising, because it contains 3 active ingredients: lactic acid from cucumbers, vinegar and salt.

foto18977-4Method of using brine:

  1. Pour the product into the thermopot until it covers the scale completely. If it is not enough, you can add a small amount of water acidified with vinegar.
  2. Turn on the device and bring the mixture to a boil.
  3. Leave for 15-30 minutes, drain the liquid.
  4. Clean the walls of the thermopot with a sponge.
  5. Rinse the device several times with clean warm water.

This method is safe and effective. Its only drawback is its distinct specific smell. Therefore, cleaning should be done in a room with good ventilation.

For descaling You can use not only cucumber, but also tomato brine. To prevent spices or other ingredients from getting into the thermopot, the brine is filtered before use.

How to remove with household chemicals?

You can deal with scale using professional cleaners, which are sold in household chemical stores and online markets. The most effective formulations:

  1. Topper for kettles and water heating devices. For 1 liter of water you will need 100-120 ml of solution. The liquid is heated to 50 degrees, left for half an hour and drained. The container is boiled with clean water.The product is non-toxic and is gentle on device parts. The cost of 250 ml of solution is 145 rubles.
  2. Filtero tablets descaling for teapots and thermopots. The device is filled 3/4 with water and brought to a boil. Place the tablet inside and leave for 20 minutes. If the plaque layer is thick, use 2 pieces. The solution is drained and the thermopot is rinsed with clean water. The cost of 6 tablets is 110 rubles.
  3. Mellerud for quick descaling. Pour 0.5 liters of water into the device and add 120 ml of solution. Bring the mixture to a boil, leave for 15 minutes, and drain. Rinse the device with plenty of clean water. The cost of 500 ml of solution is 282 rubles.
It is unacceptable to violate the manufacturer's instructions. Professional household chemicals contain acids, which can damage the walls of the thermopot during prolonged contact.

Prevention of lime deposits

In order for scale to form more slowly in the thermopot, you need to adhere to the following recommendations:

  • do not leave water in the device overnight;
  • do not boil water again;
  • Do not fill the device from the tap; it is better to use filtered or bottled water;
  • Once every 3 days, wipe the inside surface of the device with the back of a foam sponge.

Helpful information

Tips that will be useful to all thermopot owners:

  1. foto18977-5When processing the device, do not use metal sponges or sharp objects. They can damage the inner surface of the device.
  2. Preventive cleaning is carried out at least once a month. Folk remedies are used for this purpose.
  3. In order to remove a thick layer of scale, they resort to the help of professional household chemicals.
  4. If cleaning liquid has been poured into the device, household members must be informed about this in order to avoid accidental poisoning.
  5. After completing cleaning, it is better not to just rinse the device, but to boil it. The first water is not used for drinking, it is drained.

You can learn about descaling from various household appliances Here.

Conclusion

Regular removal of limescale allows you to extend the service life of the thermopot. To care for the device, you can use both folk remedies and professional household chemicals. There are compositions on sale for every budget.

Discussions

How to remove odor

Scratches

Yellow spots