Proven ways to easily remove paint from kitchen walls

Removing paint from kitchen walls is difficult. However, if you make some efforts and put into practice the advice of experts, then a person without any experience in repair work will be able to cope with this problem.

Both classic tools in the form of a spatula or chisel, as well as unusual devices, such as an iron and foil, can help in the fight against paint.

Read more about how to remove paint from walls in the kitchen, we’ll tell you in the article.

How to remove old paint?

There are several ways to remove kitchen wall paints:

1. Mechanical cleaning using special tools, for example, a spatula or a hammer drill.
2. Chemical paint removal using removers.
3. Thermal method, which is implemented by heating the wall with a hair dryer, iron or blowtorch.

Each method has its own advantages and disadvantages, which you need to familiarize yourself with before starting work.

Spatula

The spatula works well with paint that has already begun to peel and fall off. If it fits tightly to the wall, then getting rid of it using this tool will be problematic.

Advantages of using a spatula:

• no dust is generated during operation;
• it is possible to remove paint even in the most difficult to reach places, for example, in corners or near sockets;
• the walls will be thoroughly cleaned.

The disadvantages of the method include:

• labor intensity;
• the need for physical force;
• slow speed of work.

If you have a large wall to clean, the spatula may become dull. Sandpaper helps make it sharper.

You can make removal easier by using notches. They are made all over the wall, after which it is moistened with water and left until completely absorbed.

Thanks to this treatment, the paint will clean faster. If you don’t have a spatula in the house, you can replace it with a chisel.

Using chemicals

To remove paint, you can use special solvents. They are sold in building supply stores and online.

To facilitate the work and better penetration of the composition into the paint, you can first clean the walls with sandpaper or a wire brush. Surfaces that do not require cleaning should be protected with polyethylene. You need to work carefully, avoiding contact of caustic compounds with the skin and mucous membranes.

Advantages of the chemical method:

1. Easy to use.
2. Quick paint removal.
3. High-quality cleaning of kitchen walls.

Disadvantages of using chemicals:

1. Appearance of a pungent odor.
2. The need for long-term ventilation of the room, which can be problematic in the cold season.
3. The need for proper disposal of chemical residues. Information about this should be indicated on the packaging.
4. Purchase expenses.

Reagents can be made from alkali, acid or organic substances. If old paint, then preference should be given to alkaline solutions.

The most popular means to remove paint from walls:

1. Liquid compositions: remover Fly-5, Antikras, Docker S4, V33,
2. Gels: Body 700, Prestige.
3. Aerosols: Paint Remover, Kudo wash.

The average cost of washing is 600-700 rubles.

With a hammer and an ax

An area of ​​heavily painted wall can be dealt with using an ax or a hammer and chisel. The chosen tool should not be too sharp or dull. You need to act carefullyto avoid injury.

Notches are made with an ax. They should be located at a distance of about 10 cm from each other. Cleaning is performed with the tip of the tool, holding it parallel to the wall surface.

Basic steps for removing paint with an ax:

• notching;
• wetting the wall with warm water - leave it on the wall surface for 5 minutes;
• removing paint.

Advantages of the method:

• no financial costs;
• ease of use.

To make it more convenient to work, you need to take a small ax that is light in weight.

• labor intensity;
• time costs;
• violation of the integrity of the wall.

Areas located near sockets must be cleaned with a chisel, which is gently tapped with a hammer.

Using a hammer drill

Removal instructions paint from the kitchen wall using a hammer drill:

1. Connect the tool to the network.
2. Bring it to the wall, holding it tangentially.
3. Set the appropriate combat speed. The blows should be superficial but strong.
4. Systematically remove paint from the wall.

You need to work with gloves and safety glasses.

Advantages of the method:

1. Rapidity.
2. High-quality work. Using a hammer drill you can easily get rid of several layers of paint.
3. Little physical effort.

The main disadvantages of working with a hammer drill:

1. Loud noise.
2. The appearance of a significant amount of dust and debris.
3. The need to find a tool, since not every home has a hammer drill.
4. Possibility of wall damage. It increases in the absence of experience with the tool.

Thermal methods

You can get rid of paint using high temperatures. For this purpose use:

1. Construction hair dryer. A stream of hot air is directed to the area being treated. When the paint begins to melt, remove it with a spatula or construction spatula.
2. Iron. The device is plugged in and heated. Then they pass it along the wall, through a sheet of foil. The softened paint is removed with a scraper.
3. Blowtorch. The flame is brought as close to the wall as possible. When the paint begins to melt, it is cleaned off. You need to work carefully to prevent fire.

The thermal method of removing paint is always accompanied by the appearance of a pungent odor. That's why The procedure can only be carried out in rooms that are well ventilated.

It is forbidden to heat those areas of the wall where wires or wooden elements are located.

How to remove different types of paint and varnish products?

Depending on the type of paint, recommendations for removing it vary:

1. Water-based dye. You can get rid of it using any of the listed methods. However, before carrying out the procedure, the wall must be thoroughly moistened, this will make it easier to get rid of the coating. Most often, it is possible to do without the use of heavy equipment in the form of a hammer drill or drill. The walls can be cleaned well with a spatula.
2. Acrylic dye. It is easily removed with acetone-based solvents.
3. Oily dye. It can be dealt with mechanically. This is especially true when the paint is applied to the wall in several layers.

If you are not sure what kind of paint is applied to the wall, it is recommended to choose a universal product for removing it.

It could be:

• Syntilor remover (1,700 rubles per 5 kg);
• Kudo (170 rubles for 520 ml);
• Docker (1900 rubles for 4.5 kg);
• other.

The most common mistakes

When trying to remove old paint from a wall, People most often make the following mistakes:

1. Too active use of the tool. This leads to damage to the wall, which will be very difficult to level in the future.
2. Incorrect selection of nozzles for the hammer drill. It is recommended to use a special nozzle to remove paint, otherwise the wall may be damaged.
3. Heating the wall near outlets or other flammable elements. This is a serious mistake that could cause a fire.
4. Using chemicals without using a respirator. If you do not protect your respiratory system, the likelihood of poisoning is extremely high.

The safest way to remove paint from kitchen walls is mechanical cleaning. During such treatment there is no risk of fire, and no harmful substances are released into the air.

This is especially true for the room in which food is stored and the cooking process takes place.

Adviсe

To remove paint from walls, It is recommended to use the following recommendations:

1. When cleaning mechanically, for example, using a spatula, protect the eyes with construction glasses or a mask.
2. When using chemicals, wear a respirator. Hands should be protected with gloves.
3. After using the wash, the room is thoroughly ventilated. Any sources of fire and heat should be kept away from the work site.
4. To make subsequent cleaning easier and not damage the floor covering, it is recommended to protect it with plastic film.

Video on the topic

The easiest and fastest way to remove paint from a wall in the video:

Conclusion

You can remove paint from walls using any of the following methods. The main thing is to follow the sequence of actions and protect yourself from injury..

Failure to comply with safety precautions when working with heating tools or chemicals can cause property damage, fire, and even serious health problems. Therefore, experts recommend using a mechanical cleaning method. It is labor-intensive, but the safest.