Review of methods and means that can be used to effectively wash acrylic paint
Acrylic paint contains polymers called polyacrylates. This is a water-dispersed substance that, after drying, forms a dense film.
In this regard, it is difficult to clean any surfaces from such a coloring substance. It is recommended to do this before the stain dries.
It is recommended to deal with old marks using solvents. There are nuances to removing acrylic paints from various surfaces.
In this article we will tell you how and how to remove acrylic paint from various surfaces.
Content
How to remove fresh traces?
So, how to remove acrylic paint? It is recommended to wipe off the dye stain as quickly as possible. To prevent paint from drying quickly, treat the surface with cold water.
Then you need to use the following available tools:
-
Sunflower oil with soap. You need to generously moisten the stain with oil and leave for 20 minutes.After this, it is necessary to brush the surface with a previously prepared warm soapy solution. After cleaning, rinse the product with clean water.
- Isopropyl alcohol. After treating the surface with cold water, you need to generously moisten the stain on it with isopropanol. You need to wait about 5-10 minutes, then wipe off the mark with a stiff brush. After cleaning, you need to wash the product with water.
- Window cleaner. After treating the product with cold water, it is necessary to sprinkle it generously with window cleaner. You need to wait about 5 minutes, then use a stiff brush to wipe off the trace of the dye. After treatment, the surface is thoroughly washed with warm water and soap.
Dirt must be wiped off with a sponge. If necessary, you can scrub it with a brush.
How to clean old stains?
You can fight stubborn stains with baking soda or vinegar.. Solvents that are more effective include acetone and turpentine. You can also use kerosene.
Soda
Baking soda is a product that has a good cleaning effect. The substance is safe for humans.
For cleaning products from acrylic paint you need to use soda powder:
- sprinkle it liberally on the trace of the dye;
- soak the sponge with water;
- vigorously begin to rub soda into the dirt, use a stiff brush to enhance the effect;
- wash off the baking soda from the surface with warm water.
A combination of baking soda, dish soap and lemon juice will make it easier to remove stubborn acrylic stains from items.
How to wipe with vinegar?
This product contains acetic acid - it is a good solvent.. You need to first rinse the surface with cold water and then soak the dirt on it with vinegar. You can warm up the solution a little.
Acetone
This substance is used to dissolve dyes and varnishes. It is recommended to use pure acetone to remove acrylic from various surfaces, and not the one that is included in nail polish removers.
It is necessary to thoroughly saturate the paint stain on the product. Then you need to wait 5 minutes for the acetone to begin to dissolve the old paint. It is necessary to wipe off the dirt with a sponge. You can use a brush.
How to remove stains with turpentine?
This substance dissolves well not only dyes, but also varnishes. Turpentine can be used to remove old paint.
It is necessary to moisten the acrylic stain on the product with it, allow the solvent to absorb well into it. After this, use a sponge or brush to thoroughly rub the turpentine into the stain.
After treatment, the surface should be washed with water. Turpentine must be kept away from sources of fire.
Kerosene
This hydrocarbon mixture can be used as a solvent for dyes. Kerosene does a good job of corroding old acrylic marks.
If the stain is stubborn, then you need to use a stiff brush. After treatment, you need to thoroughly rinse the surface with warm soapy water and then with clean water.
Special solvents
Both aerosol and combined products are suitable for removing marks on various products. The best option is solvents. But when choosing and using them, one condition must be taken into account.
Such products have a strong odor and are harmful to the skin.. Therefore, it is necessary to work with them only with gloves and a respirator.
Solvents can have an aggressive effect on some types of products. This is especially true for fabrics and wallpaper. For such products, it is recommended to select natural rather than chemical solvents.
Video review of remover for acrylic paints:
Top 3 best
Most often, there are 3 such effective means for purifying water from acrylic paint.
WD-40
One of the best products for removing acrylic from various surfaces is WD-40 aerosol. This is a universal remedy. Its base component is white spirit, which is considered the best solvent for dyes.
WD-40 should be used according to the following scheme:
- Use a spatula or scraper to remove some of the paint from the product.
- Treat the trace of the dye with an aerosol.
- Wait at least 20 minutes.
- Wipe the stain with a sponge.
- Scrape off any remaining dirt with a scraper.
- Wash the product with warm water and soapy water.
WD-40 is best suited for removing acrylic paint from plastic, metal, wood and rubber. The price of 100 ml of aerosol is 180-240 rubles.
Denatured alcohol
One of the best remedies is denatured alcohol. This is a three-component substance. It contains three solvents. This is kerosene, as well as methanol and ethanol. 500 ml of denatured alcohol costs about 250 rubles.
The product should be used according to the following scheme:
- Moisten the dye stain generously with liquid.
- Wait about 5-10 minutes.
- Wipe off dirt on the product with a sponge.
- Wash the surface with warm water.
Denatured alcohol is poisonous. When working with the product, you need to wear not only gloves, but also a respirator. Do not keep denatured alcohol near fire.
White Spirit
The third on the list of the best means for washing acrylic from products is white spirit. This is a gasoline solvent. The product dissolves oil and acrylic paints well, as well as enamels and varnishes. The price of 1 liter of white spirit is 100-110 rubles.
You can remove the coloring matter from the product according to the following scheme:
- Apply white spirit to the stain with a sponge.
- Wait 10 to 15 minutes.
- Wipe the stain with a foam sponge.
- Wash the surface with warm water.
Work with white spirit only in a ventilated area. The product must be kept away from sources of fire. Treating surfaces with white spirit should only be done while wearing gloves and a respirator.
How to remove it from ceilings, plastic, fabric and other surfaces?
For a specific type of surface, a specific product for removing paint stains is suitable.
| Surface type | Suitable product with brief instructions |
| Plastic | It is recommended to remove dirt with WD-40 aerosol. The plastic should be wiped with a soft sponge treated with this product. Hard brushes can damage the plastic. |
| Textile | Thick fabrics can be cleaned with white spirit, turpentine, vinegar or kerosene. Delicate fabrics should not be stained with solvents. It is better to limit yourself to a soap-soda solution. After processing the fabric, it should be washed thoroughly. |
| Skin of hands | Skin is sensitive to solvents. To remove traces of acrylic from the skin of your hands, you should use alcohol, scrubs, soda with dishwashing liquid, vinegar, and hydrogen peroxide. After treatment, you need to wash your skin with warm water and soap, and then treat it with a moisturizer. |
| Ceiling | It is washed off acrylic paint with a mixture of dishwashing liquid and soap solution. You can use hydrogen peroxide.The ceiling must be treated with a soft cloth. |
| Linoleum | Any solvent is suitable for cleaning. In the process of cleaning the surface, you can use spatulas and scrapers. |
| Tile | Any solvent can be used to clean the surface from dyes. When cleaning, scrapers, spatulas, and knives are used. |
| Glass | For processing, it is recommended to choose white spirit. Knives with sharp blades can be used to scrape off dirt. |
| Wallpaper | Chemical agents are not suitable for cleaning the surface. Natural solvents should be chosen. You can use dish soap and soap. When cleaning, use soft sponges. Do not clean wallpaper with scrapers or hard brushes. |
Common mistakes when cleaning products
Some people, when removing dyes from clothes, often rub the area where the stain appeared with a brush. Excessive rubbing causes the material to deteriorate.I wear out prematurely.
Such a mistake is fraught with deterioration in the color of the clothing and its complete loss of its qualities.
Often, when cleaning any product, circular movements are made.. Do not rub the dirt from the center to its edges. Movements should only be made back and forth.
This cleaning error leads to an increase in the size of the acrylic paint stain on the product.
A common mistake is treating the product with boiling water.. Before removing the dye, the surface should be moistened with cold rather than hot water. Boiling water may cause the product to lose its shape. This is especially true for clothing and wallpaper.
A common mistake is removing stains with solvents from surfaces that are sensitive to them without first checking their effects. After using chemicals, clothes and wallpaper may be completely damaged.
Adviсe
When washing various surfaces from dyes, the following is recommended:
- always check how the chemical behaves on an inconspicuous area of clothing, wallpaper, ceiling;
When working with solvents, always wear gloves and a respirator;- When using chemicals, constantly ventilate the room;
- do not use hard scrapers when cleaning plastic, wallpaper, clothing and ceilings;
- When washing the skin of your hands from acrylic paint, use only natural products and degreasers;
- Pre-wet old acrylic paint stains with cold water before removing;
- To clean windows from coloring substances, choose predominantly white spirit.
It is important to never delay removing dye.. It is recommended to do this within the first hour from the moment the stain was placed on the product. In this case, the contamination must immediately be thoroughly moistened with cold water.
Conclusion
Acrylic paint from various surfaces should be removed instantly without delay.
Old stains are best wiped off with solvents, including white spirit and denatured alcohol.. Acetone, turpentine and kerosene have also proven themselves. When choosing a product, it is important to consider the type of product that will be processed.
