Moidodyr's advice on how and how to clean a bathtub from yellow deposits at home

An increased amount of mineral impurities in tap water contributes to the gradual formation of a yellow coating on the surface of the bath.

To remove it and return the plumbing to its former cleanliness, use home remedies and household chemicals. The choice of cleaner, as well as the operating technology, depends on the material of the bowl.

We'll tell you in this article how to clean a cast-iron, enameled, acrylic bathtub from yellow deposits at home.

How to remove yellowness using improvised means?

Traditional methods help to cope with yellowness no worse than store-bought bleaches.

Soda and peroxide

Sodium bicarbonate has good cleaning properties. To speed up and enhance cleaning, it is recommended to use hydrogen peroxide together with soda.

The algorithm for using this tool is simple:

1. Baking soda and peroxide are mixed in a 2:1 ratio.
2. Apply the paste to the yellow spots.
3. Leave the product on the walls for about an hour.
4. Rub all problem areas with a sponge.

If the yellow coating is old and thick, then repeat the cleaning with soda and peroxide.

Lemon acid

The crystalline powder, used in cooking, is also known as an effective anti-rust agent.Remove yellow and orange stains with this organic acid can be done as follows:

1. Dissolve 25 g of powder in a glass of water.
2. Apply the solution with a sponge to the stains.
3. Leave for half an hour.
4. Repeat acid treatment 4 more times.

Soda and laundry soap

This recipe helps to cope with a small light yellow coating. The removal procedure includes several steps:

• grate the laundry soap and pour in a little water;
• add baking soda to the dissolved soap mass;
• Rub the problem areas with soap and soda slurry with a sponge;
• leave the product for a while;
• Rub the stain again with a sponge.

Peroxide and ammonia

Both products are not in short supply and are easy to purchase at the pharmacy.

Discoloration of yellow spots is carried out in this order:

• hydrogen peroxide and ammonia are mixed in a ratio of 1:2;
• pour the prepared solution onto the yellow stains;
• wait about a quarter of an hour;
• wipe the bath with a sponge or cloth;
• If necessary, the treatment is repeated.

Acetic acid

To work, you need 9% table vinegar. If the contamination is weak, you can limit yourself to a weaker solution.

Cleaning is carried out as follows:

1. Soak a cloth selected according to the size of the stain in vinegar.
2. Apply a “compress” to the contaminated area.
3. Wait 1-2 hours until the yellowness is completely discolored.
4. To prevent the napkin from drying out, it is periodically moistened with vinegar.

If the entire bath is covered with yellowness, then warm water is poured into it, 1-2 liters of vinegar are added and left for 10-12 hours.

How to remove stains with special compounds?

The assortment of hardware stores offers many special gels, liquids, powders against rust or limescale.

Cleaners differ:

• composition,
• instructions,
• volume,
• at a price.

Unicum

The sanitary ware is intended for cleaning the bathroom. The spray is suitable for:

• ceramics,
• enamel,
• porcelain,
• become,
• plastic.

The formula of the product includes a mixture of organic acids, nonionic surfactants and fragrance.

Use the liquid according to the instructions:

1. Spray the spray onto the bath from a distance of 20-25 cm.
2. Maintain a full reaction time of 15-20 seconds.
3. Wipe the area with a soft brush or cloth.
4. Persistent stains are re-treated with exposure for up to 1 minute.

A 500 ml spray bottle costs an average of 500 rubles.

Mr. Chister

Acrylic bathtub cleaner helps remove:

• yellowness,
• rust,
• limescale,
• fungus.

Gives the surface shine, suitable for frequent washing:

• enameled,
• ceramic,
• acrylic,
• steel surfaces.

Includes:

• NSAS,
• lemon acid,
• antibacterial component,
• fragrance,
• preservative

Cleaning of plumbing equipment is carried out according to the following scheme:

1. The spray is sprayed onto the contaminated area.
2. Allow the product to react for 2-3 minutes.
3. With strong yellowness, the exposure time is increased.
4. Wipe the treated area with a sponge or rag.

The average price for a standard 500 ml bottle is 160 rubles.

Bagi Acrilan

A universal remedy for rust, lime and fungus. Foam spray whitens and disinfects the surface of plumbing fixtures from:

• enamel,
• acrylic,
• ceramics,
• chromium.

The active ingredients are nonionic surfactants, citric acid and solvents.

Instructions for use require compliance with the following rules:

1. Shake the bottle of foam well.
2. Moisten the surface to be treated with water.
3. Spray Acrylan evenly onto the stains.
4. Leave the product for 1-2 minutes.
5. Wipe with a damp cloth or rinse with water.

A bottle with a spray (400 ml) costs about 420 rubles in online and offline stores.

Cleaning features depending on the type of coating

Modern bathtubs can be made of cast iron, steel, and acrylic. In most cases, metal bowls are coated with enamel, which requires careful handling during operation and cleaning.

Cast iron

It is advisable to wash bathtubs made of this alloy once a week. For normal hygiene procedures use laundry soap or gel detergent. Cast iron bowls can be cleaned with weak acids (acetic, citric).

Acrylic

To maintain whiteness, it is recommended to clean plastic bathtubs with special products no more than once every 10-14 days. For such baths, it is advisable to purchase gels and foams designed specifically for acrylic products.

Polymer plastic bowl do not rub with metal brushes, use alcohol or acids. Preventive washing is carried out using washing gel or washing powder.

Steel

Bowls made of stainless steel, like cast iron, are covered with enamel. However, this layer is thinner and therefore more sensitive to the effects of cleaning agents.

For bleaching, it is recommended to use soft equipment (napkins, sponges, rags) and gentle products. It can be:

• weak acids;
• baking soda;
• ammonia;
• hydrogen peroxide.

Enameled

The glossy coating on the metal bowl requires regular washing, but special cleaning is carried out no more than once every 7 days. It is recommended to avoid strong acidic and chlorine-containing compounds, as their use can cause irreversible yellowing of the surface.

What can't be used?

When cleaning the bathtub, you should remember that not all products and tools are universal. Some of them can cause damage to enamel, acrylic or metal surfaces.

To avoid damaging the plumbing when removing yellowness, It is recommended to exclude:

1. Steel wool and brushes. Hard products leave scratches, as a result of which the bathtub will require cosmetic repairs.
2. Strong acids and alkalis. These reagents can ruin acrylic and enamel and thin the walls of a metal bath.
3. Products intended for cleaning toilets. Such gels contain aggressive components that can damage the bathtub coating.

Useful tips

To remove yellowness and further maintain the cleanliness of the font, It is important to remember these useful tips:

1. After each use, rinse the bathtub with warm water, then wipe dry with a soft cloth.
2. When using any plumbing product, it is advisable to wear gloves to protect your skin from irritation.
3. Before removing yellow stains using household chemicals, you need to turn on the forced exhaust in the bathroom.
4. The final stage of any cleansing with a special product is rinsing the bath with water and wiping dry with a napkin.
5. You should not place metal cans and bottles on the sides of the bathtub, as they may leave rust marks.
6. It is necessary to keep the faucet in good condition, since constantly dripping or flowing water leaves a persistent smudge.

All the most important and useful information about cleaning the bathroom is collected in this section of the site.

Video on the topic of the article

The video will show you how to whiten a bathtub using baking soda and citric acid:

Conclusion

Removing yellow stains from a bathtub is an unpleasant but solvable problem. To remove stains and smudges, use homemade recipes or special household chemicals. When using each product, you must follow the instructions, take into account the material of the bath, and remember important warnings and tips.