Chic, shine, beauty, or how to clean the tiles in the bathroom from plaque and dirt

Tile in the bathroom is a hygienic and beautiful design. But during operation, plaque and streaks form on the tiles, and the grout in the joints darkens.

Keeping tiles clean requires the use of available and special tools. In this case, it is necessary to take into account the intensity of contamination and the type of tile itself.

We will tell you in this article how and with what to clean tiles in the bathroom.

Handy tile cleaning products

It is possible to carry out hygienic cleaning of the bathroom with high-quality tile washing even without special preparations. Products that you already have at home will do.

Soda

Soda is a safe substance that is used in cooking and for cleaning various surfaces. Recipes based on this drug are non-toxic and give good results.

Work order:

1. Pour 500 ml of warm water into a container.
2. Add 100 grams of soda.
3. Stir.
4. Using a rag or napkin, clean the stained tiles.
5. Leave to act (for heavy contamination - for half an hour, for light contamination - for a quarter of an hour).
6. Clean vigorously.
7. Rinse off.

To wash glossy tiles, it is more effective to use baking soda instead of baking soda.

Vinegar

The acid contained in table vinegar is an effective means of removing lime.

If the stains are fresh, then using a brush they can be removed immediately. If there are rusty streaks on the tiles, then you can use the same solution with some modifications:

• dip the sponge in the vinegar solution;
• squeeze out;
• dip a sponge in salt;
• rub the stained area;
• wash off.

For old stains, it is necessary to let the mixture sit on the tiles for a few minutes before washing it off.

Ammonia

Ammonia will help deal with mold-infested areas of tiles. This product is used after the main washing of the tiles as a final treatment. It is necessary to use ammonia in diluted form: per liter of water - 2 tbsp. l.

Lemon acid

Citric acid will help remove lime on tiles.

For tiles in disrepair you can use a solution of citric acid (1 tbsp per liter of water). For light stains, even freshly squeezed lemon juice will do the job.

Acid must be used carefully. If it flows into the seams, the solution may react with the grout.

Soap

As a means of regular cleaning, when the tiles are not in a state of disrepair, you can use ordinary laundry soap. The sponge is moistened with water and lathered well until foam forms. The foam composition is applied to the tiles for half an hour, after which it is washed off with water.

Peroxide

Pharmacy hydrogen peroxide has a whitening effect. Rubbing the areas with undiluted peroxide will help remove stains and make yellowed seams white.

When processing porous materials, the procedure must be repeated several times.

Top 3 special compositions for washing

The range of household chemicals includes a wide range of special products for cleaning the bathroom, and tiles in particular. Such preparations allow you to thoroughly clean the surface, eliminating even stubborn stains.

Cillit Bang “Anti-raid”

An acid-containing cleaning product effectively removes:

• rust,
• soap stains,
• lime.

The product is applied to the stained surface by spraying or sponge. After 5 minutes, it is removed and the tile itself is washed with plenty of water.

The average price is 270 rubles.

Unicum spray

The product allows you to remove limescale deposits from tiles and properly process seams. Unicum is antibacterial and removes odors well.

Contains chlorine and surfactants. Treatment with a spray is simple, the drug is well distributed. Manufacturer – Israel.

Price – about 250 rubles per bottle.

Mellerud

Concentrated detergent is available in liquid form. Cleans Mellerud gently and effectively without harming surfaces.

The product is suitable for ceramics and natural stone that does not contain limestone, since the composition contains acids. Effectively removes rust and lime. Manufacturer – Germany.

The average price is about 550 rubles.

How to clean tile grout?

When tiling a bathroom, tile joints are the most demanding areas to maintain. They have a more porous surface compared to tiles, and it is in the seams that mold most often forms and dirt accumulates.

To handle the joints of tile slabs, it is convenient to use brushes with small bristles. For example, old teeth.

Chlorine-containing preparations

Clean up white seams one of the products with chlorine, for example, Domestos or Belizna, may help. This treatment also serves as a means of preventing mold. But it cannot be used on colored grout.

Steam cleaner

If possible, the seams between the tiles, as well as the tile itself, can be treated with a steam cleaner. This method is hygienic and does not require the use of additional cleaning products.

Hydrogen peroxide

To bleach white grout, use the following mixture:

• hydrogen peroxide - ? Art.;
• water – ? Art.;
• liquid soap – 1 tbsp. l.

All ingredients are mixed. This product can be stored. But if a brush has already been dipped into it during cleaning, the solution is used for only one procedure, and the residue is poured out.

Whitening markers

A special whitening marker will help to refresh the grout while simultaneously treating the joints from mold. If the mold damage is serious and deep, then it must be completely removed and replaced with a new one containing components that protect against fungus and mold.

The video will tell you how and with what to clean tile joints:

Features of removing various types of contaminants

Contamination of bathroom tiles is a natural process.A humid environment, the ingress of soapy water and temperature changes lead to the fact that various types of contaminants can be deposited on the tiles.

Household

The use of household chemicals in most cases requires comprehensive cleaning. Preferring simple recipes, It is advisable to take into account the type of contamination:

• water leaks, splash marks and dust can be easily removed with warm water and soda;
• yellowing and mold can be removed with laundry soap, acid solutions, and ammonia;
• Salt and vinegar remove rust.

Construction

In addition to the pollution associated with the use of the bathroom, stains and splashes after construction and renovation work can be a problem.

To remove the remains of building mixtures from tiles, a separate approach will be required, including the use of solvents.

The easiest way to remove sealant is while it is fresh. In this case, you can simply use a damp cloth or soapy sponge. Cured sealant is removed using a scraper and treatment with special solvents.

You can start by using white spirit and other available means. If they are ineffective, you can pick up a special sealant remover at a hardware store.

Paint drips are removed with solvents. It is not advisable to use a blade, as it can leave scratches on the tiles.

To remove cement deposits, you can also use improvised and special means. For example, the drug HG. To wipe off the primer, use alcohol.

What does the type of cladding affect?

For tiling surfaces in the bathroom, tiles with different characteristics can be selected. All its features must be taken into account during the cleaning process..

Matte coating

On a matte surface, traces of water and soap splashes appear after drying in the form of a whitish coating. Due to the specific nature of the tiles, it is advisable to use solutions with good penetrating ability. For example, vinegar solution for wall tiles and soda solution for floor coverings.

Embossed

It is more difficult to keep textured tiles clean than matte and glossy ones. An uneven surface with depressions and protrusions allows dirt to accumulate on such a coating.

To deal with dark spots in recesses, you will need a brush and cleaning products that provide good penetration.

Gloss

Glossy tiles should not be washed with abrasive products. The best choice is liquid and gel non-aggressive preparations, which are applied and distributed with a sponge or rag.

Also suitable for removing dirt, mirror and glass cleaner. This approach will give the tiles a streak-free shine.

To maintain the cleanliness and shine of a smooth surface, a moisture-repellent agent can be applied on top of it.

Floor tiles

Cleaning floor tiles is carried out similarly to wall tiles. The same store-bought products and homemade formulations will do..

The regularity of floor cleaning depends on the intensity of use; it should be carried out regularly. Most often, tiles with a matte surface are chosen as flooring.

11 recommendations

Clean tiles efficiently and without errors The following expert recommendations will help:

1. Do not clean with metal scrapers or brushes, as this may damage the surface.
2. Cleaning the tiles should be done regularly, taking care not to let the condition worsen. Quick cleaning is wiping off splashes of water after taking a shower, maintenance cleaning is at least once a week, general cleaning is at least once a month.
3. It is advisable to test strong household chemicals on an inconspicuous area before first use.
4. A whitish coating on the tiles will form more slowly if you wipe the tiles dry with a napkin after each shower.
5. If repair work is carried out when the tiles have already been laid, they must first be covered with a protective film.
6. Properly organized ventilation in the bathroom will prevent the formation of condensation and mold.
7. For better preservation, it is recommended to treat grout joints with moisture-resistant impregnation.
8. Residues of cleaning product must always be removed from the tiles.
9. To wash hard-to-reach areas (in corners, at joints of complex shapes), it is convenient to use an old toothbrush.
10. A tile with a damaged surface loses its resistance to strong cleaning agents.

All the most important and useful information about cleaning the bathroom is collected in this section of the site.

Video on the topic of the article

Video tips will help you clean bathroom tiles:

Conclusion

It is easiest to clean bathroom tiles when they are not neglected. You can use improvised and special means, acting in accordance with the instructions.