Advice from experienced housewives on how to clean a bathtub white using home remedies

No matter how carefully the bathroom is used, dirt and plaque will appear on its surface over time. As a result, the appearance loses its attractiveness, and the bath itself becomes unhygienic.

The issue can be resolved not only by using special means, but also by simple folk methods.

We’ll tell you in this article how to clean your bathtub white using folk remedies at home.

Top 10 folk recipes

Homemade bath cleaning recipes can be no less effective than store-bought products. When using them, you must follow the procedure and rules of use.

Soda with vinegar

In cases where persistent contamination occurs, vinegar and soda can be used in such a way that a reaction occurs between these substances on the contaminated surface.

Procedure:

1. Wipe the surface of the bath with a rag soaked in water.
2. Sprinkle baking soda into the bath to form a thick layer.
3. Let stand for 10 minutes.
4. Sprinkle with vinegar.
5. Leave for 20 minutes.
6. Wipe the bath with a sponge.
7. Rinse with water.

The method is suitable for cast iron bathtubs with an enamel coating.

Vinegar

You can use table vinegar to clean the bathtub.Its use allows you to remove rusty streaks.

Lemon acid

Treating the bathtub with a solution of citric acid will help remove rust and yellowness. Procedure:

• pour 1 glass of warm water into the prepared container;
• pour 1 sachet of citric acid into the water;
• stir until the powder dissolves;
• moisten a napkin in the solution and wipe the surface;
• leave for 30 minutes;
• wash off.

Salt and wine vinegar

To make an enamel bath white, a solution prepared from half a glass of wine vinegar and 1 tbsp is suitable. kitchen salt.

Work order:

1. The ingredients are mixed in a container.
2. Heat to a temperature of 60? C.
3. Apply to areas that need to be bleached.
4. Leave to act for 20 minutes.
5. Wash it off.

Oxalic acid

Oxalic acid can be used to remove traces of rust from acrylic bathtub surfaces. Procedure for preparation and use:

• pour 1 glass of water into a container;
• add 1 tbsp. l. oxalic acid;
• apply to areas affected by rusty stains;
• leave for an hour;
• drain with water.

Hydrogen peroxide and sodium salt

The recipe is suitable for removing heavy rust from the bottom of a cast iron bathtub. Preparation:

1. Pour 3 liters of water into a bucket.
2. Pour in? glasses of hydrogen peroxide.
3. Add 4 tbsp. l. sodium salt.
4. Stir.

Laundry soap and soda ash

A recipe based on soda ash and soap is suitable for complex processing.Both components must be taken in equal proportions.

Preparation procedure:

• grate the soap;
• mix with soda;
• add a little water to form a paste;
• apply to the surface;
• stand for an hour;
• scrub the bathtub with a sponge;
• wash off.

This composition is neutral in relation to all types of bathtub surfaces.

Washing powder, peroxide and soda

A cleaning mixture made from baking soda, laundry detergent and peroxide can be used for all types of baths. This composition allows you to remove rust and lime.

Procedure:

1. Pour into the prepared container? glass of peroxide.
2. Add 2 tbsp. l. soda and powder.
3. Pour in hot water (1 cup).
4. Wet the sponge in the solution and treat the surface of the bath.
5. Leave for 30 minutes.
6. Rinse off.

Cleaning powder, peroxide, cream of tartar

To prepare the cleaning composition The following ingredients are needed:

1. Cleaning powder (for example, SARMA or Gala) – 0.3 kg.
2. Peroxide – 70 ml.
3. Tartar stones – 5 grams.

Connect all components. As a result, a cleaning paste is formed, which is convenient to apply to the surface of the bathtub. It is left to act for a quarter of an hour, after which it is washed off with water.

Ammonia and peroxide

An anti-yellowing bathtub cleaner can be prepared from two components - hydrogen peroxide and ammonia.

Procedure:

• connect ? a glass of peroxide with 1 glass of ammonia;
• wipe the bathtub;
• leave for a few minutes to act;
• wash off.

The prepared solution will whiten not only the bathtub, but also the tiles.

Features of cleaning taking into account the material of the container

Bathtubs can be made from various materials. The most popular coatings are: acrylic and enamel-coated cast iron.

Enamel

Enameled cast iron bathtubs have a reliable coating with a long service life. Despite the strength enamel is sensitive to abrasives, therefore it is better to avoid intensive exposure to hard brushes.

Ceramics

Maintenance of a ceramic bath has its own characteristics. Do not use hard brushes for cleaning, and the cleaning itself should be regular. The external glaze coating withstands the effects of acids (for example, acetic acid).

Plastic

Plastic is very sensitive to almost any impact and is short-lived. The best option for cleaning it is to use warm soapy water and a sponge.

Tree

A wooden bathtub is environmentally friendly. This addition to the bathroom will give it an unusual, original look.

But it will require enough complex care, which includes:

• high-quality washing after each use, which will prevent the appearance of complex stains;
• You can only use cleaning products that are intended for varnished surfaces;
• Drying between baths.

Acrylic

Acrylic bathtubs do not withstand the effects of caustic acids and concentrated alkaline compounds. Recipes based on alcohol, ammonia, and chlorine are also not suitable for such surfaces. The best option is soft solutions that are applied with a sponge or rag.

Stone

A high-quality stone bath is an expensive product. They are made from artificial or natural material. The surface of such bathtubs is smooth, not subject to corrosion and not prone to the formation of fungus.

Marble

A marble bath is expensive and very demanding in terms of care products. The safest recipe for cleaning such a surface is a soap solution.

If the surface is white, lemon juice and salt will help whiten it.. It is not recommended to use chemical commercial cleaning products.

Marble baths require periodic professional restoration work.

Kvaril

Quaril is a modern polymer material consisting of acrylic and quartz sand. This composition provides good strength, including resistance to mechanical stress.

Features of the operation of quaril baths:

1. Avoid hitting the bathtub with heavy objects.
2. Do not use very hot water.
3. Can be cleaned with any composition, even abrasive ones.

A significant disadvantage of such baths is their very high price.

Cleaning chrome elements

When tidying up the bath itself, you should not forget about the mixer, fasteners and shower hose. These parts also need cleaning.

For cleansing you can use:

• vinegar;
• toothpaste;
• dentifrice;
• soda

10 useful tips

Clean your bath properly The following expert advice will help:

1. All cleaning work should be carried out with rubber gloves.
2. It is not recommended to use acetone and technical acids to remove contaminants, as they can damage the surface of the material.
3. Even in advanced cases, you should not use serious abrasives - metal brushes, sandpaper, etc. This limitation applies to all types of coverage.
4. The bathtub must be washed after each use, otherwise it will lose its attractive appearance and hygiene.
5. When planning repair work, it is advisable to cover the bathtub with film. This will protect the surface from the appearance of construction contamination.
6. If the bathtub is old and has not been thoroughly cleaned for a long time, it may be necessary to clean several times to completely clean the surface.
7. Do not try to chip, cut with a knife or knock off limescale with a hammer, as this may damage the surface.
8. Well-organized ventilation of the bathroom will prevent the appearance of fungus in the room, including at the junction of the bathtub and the tiles on the wall.
9. Tidying up the bathtub should be complemented by washing the curtains.
10. After cleaning the bathtub with any means, its surface must be rinsed with plenty of water.

All the most important and useful information about cleaning the bathroom is collected in this section of the site.

Video on the topic of the article

Further in the video you can see how to clean the bathtub white using folk remedies:

Conclusion

It is quite possible to clean your bathtub white with home remedies. To do this, you will need simple drugs that are not expensive and are already available at home. The choice of a specific recipe should take into account the material from which the bath is made, as well as the degree and nature of contamination.