A convenient way to extend the life of your tool: a mop attachment with a squeeze

foto44880-1Spin mops have long ceased to be something special in households.

Easy to use, practical and attractive in appearance, they greatly facilitate household cleaning work.

Special replacement attachments are available for spin mops. We’ll talk about removable products for squeezing mops in the article.

What is a removable block?

Modern squeezing mops consist of a base made of metal, plastic or wood and an attachment. She is a removable element that is directly responsible for washing the surface.

The predecessor of modern wrung-out mops can be considered simple wooden ones, on which a wrung-out rag was thrown on top. The functional purpose of all work surfaces is the same - high-quality wet cleaning.

Replaceable options - convenient and practical. The washing surface can be made of foam rubber, microfiber, polyester or cotton. Outwardly, it may look like a sponge roller, an ordinary rag, or ropes connected together.

Kinds

Replacement blocks are selected depending on the cleaning conditions and type of surface. However, the material and shape may be different.

Sponge

Part in the form of a sponge roller is included in the kit with mop and can be purchased separately. The sponge cleans the floor well and is not difficult to wring out without any special effort.

This nozzle is suitable for cleaning floors and collecting pet hair. As the sponge becomes dirty, it must be rinsed and wrung out using a special mechanism.

foto44880-3

Butterfly

The basis of the butterfly design is also a sponge. But her spin principle is different. Excess water is removed by folding the nozzle and squeezing its two parts. The name “butterfly” itself comes from this method of folding.

When folded, the mop takes up little space. The butterfly absorbs moisture well, washes without leaving unsightly stains. The basic rule of use is to rinse well. The disadvantage of the nozzle is the high probability of breakdowns and a relatively short service life.

foto44880-4

Rope

This attachment consists of ropes gathered together into one bundle. Squeezing is usually done by using a special bucket that contains a part for squeezing.

This model is considered economical and copes well with dirt. But you won't be able to collect pet hair with it.. This option is also not suitable for floors made of parquet or other material that does not tolerate strong moisture.

foto44880-5

Tape

The ribbon attachment is similar to a rope attachment. It is based on strips of fabric. The material can be polyester, cotton or microfiber. Such fabric “panicles” are wrung out by rotation.

foto44880-2

Flounder

Lightweight and quite simple in design, the flounder mop is suitable for washing various surfaces. The nozzle is attached to the base using clips, buttons or pockets, depending on the specific model of the manufacturer.

Externally, it is a removable rectangular rag made of highly moisture-absorbing material. Most often - made of microfiber.

foto44880-6

Recommendations for selection

Manufacturers produce a wide range of mops and attachments.A review of the models will help you choose exactly the one you need.

When purchasing a new replacement part, The following points should be taken into account:

  • size that must match the mop model;
  • price;
  • manufacturing material.
The most practical are microfiber nozzles. They have high performance qualities. Polyester is not the best option; it collects water worse and can leave streaks.

Natural cotton also leaves marks, does not last long, and is inferior in its characteristics to microfiber. A sponge cleaning part is the best option for picking up pet hair.

Flat rectangular

This attachment lasts quite a long time. Microfiber can be used to clean any surface, including parquet and laminate. The flounder model is convenient for cleaning under furniture with legs.

This mop can be used not only for wet, but also for dry cleaning. The attachment is easily removable and tolerates washing well at a temperature of no more than +40? C. The size of the pile on the working surface may vary - from small to large “pimples”.

foto44880-7

Flat triangular

The triangular nozzle, like the rectangular one, is suitable for daily cleaning. Design feature: triangular shape. Thanks to her, it is not difficult for the housewife to wash the floor even in the far corners. Microfiber can be washed and dried.

foto44880-8

Double sided

These attachments are suitable for both wet and dry cleaning. The side with short pile is intended for cleaning, and the side with long pile is intended for polishing the floor surface that has been previously washed.

foto44880-9

Round rope

Long pile in the form of microfiber ropes is suitable for regular cleaning surfaces that may be exposed to moisture. The bristles of the nozzle are washable.

foto44880-10

Spongy

This option is optimal for regular cleaning. It is suitable for collecting dust, small debris, hair and animal fur.


The maneuverability of this design is relatively small, and it is not always possible to rinse the corners well with a sponge nozzle.

foto44880-11

How to remove and change?

When purchasing a new mop, it comes with instructions that indicate all the operating features. Including descriptions of attachments suitable for a particular model.

The replacement process is not complicated and is accessible to any user. No special tools are needed for this.

The nuances of fastening a new working surface are usually indicated on the label for the new nozzle. There is only one main requirement - the nozzle must be designed for a specific mop model. If this rule is followed, you can be sure that the nozzle will fit exactly.

The fastening mechanism may differ between models from different manufacturers. The washing part for the flounder can be attached with buttons or secured to the base using special fabric pockets. In the latter case, to remove the fabric, press the pedal. There are also models with fastening using clips.

You can watch the video on how to replace a sponge attachment in the form of a roller:

Where to buy and how much to pay?

You can purchase the required nozzle in specialized hardware stores and in the home goods departments of supermarkets. The cost depends on the place of purchase, manufacturer, size/shape, material, and is in a wide range. On average from a couple of hundred rubles.

Top 3 popular models

Users do not rate all attachments highly. Among the popular models that most people like are mainly microfiber products.

Vileda SuperMop Antibak

The 10 cm wide rope attachment is made of polyester and cotton.Fastening is threaded. The cost of the product is from 450 rubles.

Customer reviews about the strip mop are almost all positive. High quality product, easy to use. If necessary, the nozzle can be easily replaced with a new one.

foto44880-12

Leifheit Picobello S micro duo

Flat mop made of foam rubber and microfiber designed for a flounder-type mop. Product width – 27 cm. Cost – from 600 rubles.

Reviews about the product are mostly positive. Buyers note the decent appearance and good quality of the item.

foto44880-13

Leifheit on buttons

The button attachment is designed for a flat-shaped flounder base. Material composition: microfiber with added polyester. Width – 0.42 m. Cost – from 1200 rubles.

The cover is securely fixed with buttons and serves well, only slightly losing its light shade during use. Users rate the quality of the product highly.

foto44880-14

Conclusion

Changing the attachments on a squeezing mop is a convenient way to extend the life of the tool. When choosing a mop for washing and the attachments themselves, you need to take into account the type of floor covering, as well as the presence of four-legged pets in the house and the budget planned for the purchase.

Discussions

How to remove odor

Scratches

Yellow spots