As easy as shelling pears, or how to change the attachment on a mop with a spin

Wet cleaning must be done regularly. To make the process less of a burden, there are devices that are designed specifically for this purpose.

One of these is a mop with a push-up attachment. However, with frequent use, its cleaning surface becomes unusable.

Read the article about how to change the attachment on a wringer mop without breaking the device, as well as where and how much you can buy it for.

What will you need?

To replace the mop head, you will need:

• crosshead screwdriver;
• pliers;
• bucket with water.

How to replace?

To change the mop head, you need to do the following:

1. Remove the old sponge. To do this, use a screwdriver to unscrew the retaining bolts. Most often there are 4 of them. They are attached to the moving part of the platform.
2. In the process of removing the bolts, you may encounter the fact that the spine will move in one direction, and the screws will have to be unscrewed in the other direction.

   To avoid slipping, you can ask for help. Have a partner hold the spine while doing the work. If there is no second pair of hands, it is clamped with feet or fixed with an improvised vice.

3. Assess the condition of the mop. While it is disassembled, you can tighten the hidden bolts and check the strength of the coupling to the handle.If the elements become loose during operation, they are fixed by screwing in several additional screws.
4. Remove the film from the new attachment, remove tags, stickers and labels.
5. Install it into place. To tighten the screws securely, the sponge can be moved from place to place. There is no need to tighten the screws. They must be inserted into the mounting slots until they stop. This will extend the life of the product.
6. Soften the new foam. This is done in order to use the device comfortably in the future. Fill a bucket with hot water and lower the mop into it for 5 minutes. To achieve optimal effect, the nozzle must be completely immersed in water. If after softening there is no need to immediately use the mop, wring it out and put it away for storage. Under no circumstances should you dry it on a running radiator or near an open fire source.

There are inexpensive squeezing mops on sale, the mechanism for replacing the nozzle is very simple. All you have to do is gently press the key with your foot to fold the base in half. After this, you can easily remove and replace the washing surface.

The video will show you how to replace the replaceable unit on a mop:

How to choose the right replacement sponge?

Selection rules replacement mop head:

1. Specify the brand name of the mop. If the attachment is made by another manufacturer, it may not fit the original product.
2. To eliminate the possibility of error 100%, you can take the old nozzle with you to the store. It is lightweight and does not take up much space in your bag.
3. If the purchase is made online, it is necessary to take measurements and compare them with the product being purchased.
4. The mounting holes of the new and old nozzles must match completely.

Where and for how much can I buy it?

Some mop owners are of the opinion that it is easier to buy a new product as a set than to replace the head.

Actually this is not true. The process itself does not require much time and effort, but at the same time it allows you to significantly save your budget.

The average cost of a sponge attachment is 100-150 rubles. Prices for a mop start from 350 rubles. For a high-quality and durable product you will have to pay at least 800 rubles.

You can purchase a mop attachment at a hardware store. They are also sold in online markets, orders are placed online. Preference should be given to large platforms with a good reputation. This will avoid transferring money to scammers.

Helpful information

Tips for replacement and use mop attachments:

1. Since the mop is constantly in contact with water, the bolts that hold the mop head often become covered with rust. Corrosion can make them difficult to remove. To avoid stripping the threads and breaking the plastic base, you can use a lubricant, for example, VD-40. It is applied to the bolts, after 2-3 minutes they begin to twist them.
2. Rusty bolts should not be used to secure the attachment. It is better to purchase new screws of the appropriate size.
3. You need to tighten the screws clockwise and unscrew them counterclockwise.
4. Mops with thin plastic handles are short-lived.Often they break precisely at the stage of replacing the sponge.
5. To extend the life of the nozzle, it should not be immersed in aggressive compounds (alkaline or acidic solutions). Floors should be washed with water and a professional cleaner.
6. Do not leave the product in a bucket of water for a long time. The mop is washed, the foam is wrung out and stored in a dry place.
7. If, after replacing the head, the mop does not wring out well, the mechanism may be jammed. It is enough to turn the spin handle 2-3 times for the product to work as before.

Conclusion

The process of replacing the mop head will go quickly and smoothly if you follow the instructions. You can complete the task in 10-15 minutes. The main thing is to choose an identical sponge, the mounting holes of which will coincide 100% with the base.