Nuances and application of the Wool mode in the washing machine

Woolen items require special care, which is why many people refuse to buy them.

In fact, such restrictions are unnecessary, because almost every modern washing machine has a “Wool” mode.

Read the article about what it is, how to use it correctly, at what temperature it is washed and more.

What kind of washing program is this?

The “Wool” mode belongs to the category of additional programs, so you can find machines that do not have it. Although most modern units are equipped with this function.

The drum gently sways from side to side, imitating hand wash. As a result, the fibers do not roll down, the product does not stretch or shrink.

Some washing machines may not have a “Wool” mode. In this case, select the “Delicate Wash” or “Gentle Wash” program.

What is it needed for?

This mode is suitable for washing items made from any wool. You can find out what material the item is made from using the information on the label.

"Wool" program can be used to wash items with the following symbols:

• Wolle (pure wool);
• New wool, schurwoll, virgin wool, lana vergin (wool mixed with other fibers, but not more than 7%);
• Lambwool;
• Merinowalle;
• Camello, camel, kamel, alpaca (camel hair);
• Kashmir, Cashemire (cashmere);
• Mohair (mohair - wool of Angora goats) and more.

The gentle treatment of fabric also allows you to use this mode to care for items made from other materials that require careful handling. It is used when washing light and medium soiled items. If the stains are complex, it is better to treat them in advance, for example, use a stain remover.

Stages

Program "Wool" includes the following steps:

1. Clean water flows into the tank.
2. After a few minutes, water with a detergent dissolved in it is poured into it.
3. Scroll the items slowly to distribute the detergent evenly.
4. The movement slows down. From time to time the drum turns 1-2 turns. Washing goes as smoothly as possible. Most of the time the products just sit in soapy water.
5. After 20-25 minutes the drain occurs.
6. Several rinse cycles are started.
7. The water is drained, and conditioner or conditioner enters the machine, if it was poured into the compartment.
8. The final stage is the final spin, if it was specified in the settings.

Processing time

The washing time when the “Wool” mode is selected differs depending on the brand and model of the washing machine. Its increase is affected by water temperature and spin speed. The higher these indicators, the longer things will stay in the drum.

Although there are SMAs in which the washing time in the “Wool” mode is 1.5-2 hours. If possible, avoid leaving delicate fabrics in water for such long periods of time. Recommended washing time – 40 minutes.

Water temperature

By default, most washing machines heat the water to 30 degrees. There are models in which this figure is increased to 40 degrees. If necessary, the heating element can be deactivated by treating delicate fabrics in cold water.

Features Features

By activating the “Wool” mode when washing, The following features must be taken into account:

1. Do not fill the drum completely. Things should not occupy more than 2/3 of its volume. Otherwise, the quality of the wash will be reduced.
2. The water temperature should not exceed 40 degrees. Washing in boiling water will cause irreversible damage to the product.
3. It is recommended to use liquid detergents. Gels They are better rinsed from fabric fibers, dissolve faster and wash out pigment less.

   It would be good if the packaging was marked “For washing woolen items.” Such gels contain additives that improve the appearance of the product, for example, prevent lint from caking or have an antistatic effect.

4. You need to make sure that the detergent you choose is designed for use in washing machines.
5. The default spin speed in most SMAs is 800 rpm. It is recommended to reduce it to 400-500 rpm, or turn it off completely.
6. On most SMA models, the modes are labeled with words. Images of a ball or skein of yarn, or a box of wool can be used as symbols.

User manual

The procedure for washing woolen items should be as follows:

• turn things inside out;
• place them in the drum, close the hatch;
• pour the gel into the detergent tray - in most SMAs there is a section for the gel, which is located in the center;
• select the “Wool” mode;
• set the desired spin speed - the more delicate the fabric, the slower it should be; if necessary, the spin can be turned off completely;
• set the water temperature - by default it is 30 degrees, you can also turn off the heating completely and wash in cold water;
• start the wash cycle, wait for it to complete4
• if the spin was turned off, after removing the items, wrap them in a terry towel and lightly squeeze them to remove excess water, after which you can send them to dry.

Drying woolen items

Features of drying woolen items:

1. Before you start drying, you need to read the information on the product label.
2. If drying is allowed, spinning should be done at a speed no higher than 400 rpm. As a rule, this applies to felt and baize.
3. If drying is prohibited, to remove excess moisture after washing, wrap the item in a terry towel and gently press it without twisting it.
4. Dry fabrics on a flat surface. To ensure that the water evaporates faster, things are left in a warm room with good ventilation.
5. From time to time the products need to be turned over.
6. In a vertical position you can dry flannel, cloth and drape coats.

Designations in SMA of different brands

Depending on the brand of the washing machine, the settings for the “Wool” mode will differ:

1. Bosch. Default settings: spin – 800 rpm, duration – 40 minutes, water temperature – 40 degrees. Heating can be reduced to 30 degrees or turned off completely.
2. LG. Default settings: spin – 800 rpm, water heating – up to 40 degrees. If necessary, all listed options can be reduced to zero. The average duration of the program is 1 hour.
3. Samsung. The mode in the SMA data is literally called “Hand washing wool”. Default settings: water temperature – from 30 to 40 degrees, maximum spin speed – 800 rpm. The cycle lasts from 40 to 50 minutes. Maximum drum load is 2 kg.
4. Indesit. Default settings: water heating – 40 degrees, spin speed – 800 rpm, cycle duration – 55 minutes.
5. Candy. Default settings: water heating – 30 degrees, spin speed – 800 rpm. The cycle duration is half an hour.

Video on the topic of the article

Video review of the Wool mode on the washing machine:

Conclusion

Wool items require gentle washing, for which the “Wool” mode is ideal. With its help, you will be able to get rid of dirt and keep things looking attractive for a long time.