Instructions for connecting a Whirlpool washing machine

Buying a new Whirlpool washing machine is not enough. For it to work correctly and smoothly, it must be properly connected to the main communications.

If the technology is broken, you will not be able to use the device, and if there are serious errors, the risk of breakdown increases.

We will tell you in this article how to connect a Whirlpool washing machine to electricity, water supply and sewerage, as well as what mistakes to avoid.

Preparation

Before starting the main work on connecting the Whirlpool washing machine, it is necessary to carry out preparatory measures.

So that during the work process you do not have to be distracted by searching for the necessary tools, they are prepared in advance.

You will need:

• stationery knife for convenient opening of the package;
• a set of keys of different sizes;
• level;
• rubber pads on the legs - they help prevent the device from slipping during the spin cycle; the pads are especially important in rooms with slippery floors.

After the packaging is removed, remove the brackets holding the hose and cable. They are mounted on the back wall of the device.

How to remove shipping bolts?

The tub of every Whirlpool washing machine is secured with shipping bolts. The manufacturer does this for the purpose of safe movement of the device.

Thanks to the bolts, it is possible to avoid play of the tank and its impacts on parts and the body. There are 4 of them in total.

Selecting a location

The place for installing household appliances must be prepared in advance. Points to pay attention to:

1. Compliance of the size of the device with the area chosen for installation. It is impossible to determine the dimensions “by eye”. An error of a few centimeters will result in the machine having to be returned.
2. Ease of access. There must be no obstacles to opening the door.
3. Proximity of communications: water supply, sewerage, power supply.
4. Smooth surface. If the device is placed at an angle, it will not be possible to avoid vibrations and loud noise. To level the technique, the legs can be twisted, changing their height. The level will help determine the position. Experts recommend installing the device on concrete and tiled floors. Linoleum will simply sag under the weight of household appliances.

The washing machine can be placed in the kitchen, bathroom, or utility room. The main thing is to monitor the humidity level. If it is elevated, it is necessary to ensure high-quality ventilation.

How to connect?

Let's consider the algorithm for connecting a washing machine to communications:

To electricity

Do not connect the washing machine through an extension cord or tee.

For equipment you need to prepare a separate outlet. This will avoid short circuits and reduce the risk of breakdowns due to network overload and voltage surges.

It is recommended to install special sockets in the bathroom that will be protected from moisture. A prerequisite is the presence of grounding.

It is convenient to use sockets with a hinged lid secured by a spring. When not in use, it will cover the plugs and contacts, preventing them from getting wet.

The socket should not be located very far from the machineso that the cord is not strained when connecting. After completing the wash cycle, the washing machine plug must be removed from the socket. You cannot leave the device plugged in.

To the water supply

The Whirlpool washing machine is connected only to cold water. The internal element, the heating element, is responsible for heating. You can do the wiring yourself, or ask a plumber for help.

An adapter equipped with a tap is installed on the pipe, to which an inlet hose is connected.. It comes with the washing machine. If it is not long enough, you can purchase a hose of a suitable size.

There is no need to use keys to avoid damaging the plastic element. The free end of the hose is connected to a tap installed in the water supply.

To the sewer

There are three ways connecting the Whirlpool washing machine to the drain system:

1. Inserting a drain hole into a sewer pipe.
2. Connection via a siphon installed under the sink.
3. Leading the drain hose into the bathtub or toilet.This method is the most losing. Firstly, the hose hanging in the bathtub does not look very aesthetically pleasing.

   Secondly, you will not be able to use the plumbing while the device is operating. Thirdly, there is always the possibility of forgetting to remove the hose, which will lead to flooding.

If the connection to the sewer pipe was made earlier, you can immediately remove the drain hose. It must be of high quality, equipped with a dense rubber cuff, which will not only securely hold the hose, but also prevent foreign odors from entering the apartment.

Important points to pay attention to when connecting the device to the sewer:

• the hose must be positioned evenly, without creases or kinks;
• it must be placed above the level of the tank to prevent water from flowing back;
• Do not allow furniture or the device itself to put pressure on the hose.

It is necessary to check the reliability and strength of all connections manually.

How to set up and run the equipment?

After the device is connected to communications and correctly installed, you can begin the first start-up.

The procedure is as follows:

1. Connect the machine to the power supply.
2. Turn the water supply valve to the working position.
3. Open the detergent tray and pour washing powder into it. The dosage should be reduced by half compared to standard washing.
4. Set washing parameters: water temperature up to 60 degrees, program – cotton without soaking, spin – 600 rpm. The approximate washing time is 1 hour 37 minutes, the exact values ​​depend on the SMA Whirlpool model.
5. Without loading things, close the hatch until it clicks.
6. Click the “Start” button.
7. Wait for the program to complete.
8. Open the hatch door and wipe the cuff from any remaining water.

The first run is always performed without underwear. It will help wash the internal parts from dust and machine oil residues.

Possible difficulties

Difficulties you may encounter during installation Whirlpool washing machine and how to fix them:

1. The inlet hose is not long enough. If it is not enough, you can purchase an original element of a larger size.
2. Vibrations and jumping of the machine when first started. Most often this happens because the device is not level. It is necessary to adjust the height of its legs.

   If the problem persists, it is recommended to use rubber pads to prevent slipping.

3. Leak detection. Most often it occurs at the joints of hoses. The use of sealant, which is used to coat the sealing ring, helps to cope with the problem.
4. Sewage smell. The reason lies in the lack of tightness of the ring leading to the drain. If the installation work was carried out by a plumber, you must contact the management company.

How much do the services of a master cost?

If it is not possible to independently connect the device to communications, call a specialist. The cost of services varies widely. It starts from 1500 rubles and can reach 5000 rubles.

You can find a specialist on the Internet, in classified ads.A similar service is often offered in hardware stores. You can also contact your friends. It is possible that they have contacts of a specialist who installs washing machines.

Helpful information

Installation Tips Whirlpool washing machine:

1. Removed shipping bolts should not be thrown away. They may be useful during subsequent movements of the device, for example, when moving.
2. When inserting a tap into a water pipe, it is recommended to choose a place with easy access so that, if necessary, it can be quickly turned off.
3. Before the first start, you must make sure that the CMA drum is empty.
4. To avoid difficulties when starting and installing the device, you must read the User's Guide that comes with each machine.

Video on the topic of the article

The video will show you how to install a Whirlpool washing machine:

Conclusion

Connecting a Whirlpool washing machine will not take much time if you prepare wisely. The performance of household appliances in the future depends on how accurately and correctly the process is organized. It is not difficult to cope with the task on your own. The main thing is to act according to the instructions.