Why won't my Whirlpool washing machine turn on and how can I turn it on?
Things are loaded, the machine is plugged in, but nothing happens. This can happen to any brand of home appliance, and Whirlpool is no exception.
You should not immediately call the service center or go to the store with a complaint. It is possible that the machine does not turn on due to a breakdown.
Why the Whirlpool washing machine does not turn on and how to turn it on, read the article.
Content
Causes of malfunctions
If the Whirlpool washing machine is plugged in, but nothing happens, reasons may be as follows:
- The power source is faulty: socket or plug. Sometimes a breakdown is preceded by sparking or melting of the plastic.
- The electricity supply in the house or apartment is turned off, or the traffic jams are knocked out.
- The control module, the “brain” of the washing machine, has failed.
- The interference filter is faulty.
- The power button is broken.
- The hatch locking device has failed.
- The cord is broken.
What to check first?
Immediately after detecting a breakdown, you should not disassemble the case and try to re-solder the control board. It is possible that the cause of the malfunction “lies on the surface.”
To begin with, simple breakdowns are excluded:
Checking electricity in the house.If it is not there, no device will work.- Assessment of the condition of the shield. Most often, when overloaded, old circuit breakers are knocked out or neighbors turn them off by mistake, trying to cut off the power in their own apartment.
- Assessing the performance of the outlet. You can try to replace it only after the residential area has been completely de-energized.
- Diagnostics of cord and power supply and plug. They can be chewed by pets, cut or broken by children while playing. Sometimes the cord deteriorates when pinched, for example, when it accidentally gets under the foot of a washing machine.
If the display turns on, but the machine does not work, an error code is often displayed on it. It facilitates diagnosis, as it immediately indicates a breakdown.
Repair
If the fault cannot be found, it’s time to move on to more complex diagnostics. In most cases, it will not be possible to do without disassembling household appliances. However, this is not difficult to do if you follow the instructions.
Network filter
A surge protector is installed in every washing machine. It prevents household appliances from breaking down if voltage surges occur. If the filter malfunctions, the device will not turn on, which is a kind of protection against burnout.
You can troubleshoot the problem as follows:
- disconnect the device from all communications;
- twist the back panel;
- remove the surge protector, which is located on the side wall;
- replace the faulty part;
- Reassemble the device in reverse order.
On/Off button
You can determine that the power button is faulty by visual inspection.
Signs of damage:
- the button is pressed in;
- she dangles;
- pressing is difficult.
Diagnostics is performed using a multimeter. If a breakdown is detected, the button is replaced. To do this, you will have to twist the top cover, remove the powder receptacle, remove the control panel and replace the faulty element.
Control board
The control module is responsible for all operations that the washing machine performs. If it breaks down, the device either completely stops responding to commands or performs them incorrectly.
The entire electronic controller breaks down rarely. In most cases, resistors or tracks burn out. This can be corrected by resoldering them. In case of a system failure, you will have to perform a flashing.
In general, repairing the control board is difficult from a technical point of view, so if you do not have the necessary skills and knowledge, it is better to entrust it to a specialist.
Wiring
Damaged wires will not be able to transmit signals, so the Whirlpool washing machine will not work. To carry out diagnostics and repairs, you will have to disassemble the device.
After gaining access to the wires, they are inspected for damage. It is also necessary to evaluate the tightness of the contacts. Sometimes they come off due to excessive vibration or when the device is moved from place to place.
UBL
If the hatch locking device fails, the machine will turn on, but will not work. This is due to the fact that washing is simply impossible with the door open.
A malfunction will be indicated by audible signals., as well as the inability to close the door until it clicks.
If the device is equipped with an electronic display, the FDU code will be displayed on it.This is what is characteristic of a UBL malfunction. Replacing the part is not difficult.
Power cable
Mechanical damage to the cord is easy to notice. In the problem area it will be broken or torn. If there are no external defects, it is checked with a multimeter.
It is better to replace a cord that has become unusable. It is dangerous to use it as there is a risk of electric shock. In addition, a cord with poor conductivity can cause damage to the washing machine as a whole. Then the repair will cost a more impressive amount.
Top loading washing machine
Whirlpool top-loading washing machines differ from front-loading appliances in their design. Their drum is located on top, so to get to the wiring or interference filter, it will have to be dismantled.
Removing the tank and the top cover with the control panel is a complex process. It takes a lot of time and also requires physical strength. This must be taken into account before starting work. Otherwise, the repair of washing machines with different types of loading is no different.
Call the master
The help of a specialist will be required for complex repairs if the breakdown cannot be repaired on your own. You can find a specialist using the following resources:
- Explore message boards on the Internet.
- Contact the service center of the household appliance store where you purchased the washing machine. If it is under warranty, and the breakdown was not due to the user’s fault, then the repair will be performed free of charge.
- Buy a city newspaper with advertisements.
- Examine billboards on entrances and in other public places.
- Consult with relatives or friends. It is possible that they will have contacts of a good master.
When contacting a service center, the likelihood of meeting an unscrupulous technician is much lower. However, the cost may be higher than private workers.
Approximate prices:
- repair of the control board – from 2400 rubles;
- replacement of the control board – from 7,000 rubles;
- replacement of wiring – from 1800 rubles;
- replacement of a surge protector – from 1,500 rubles;
- cord replacement – from 1500 rubles.
You will have to purchase new parts yourself. After completing the repair work, you must ask the technician for a receipt and a guarantee for the replaced elements. Lack of papers is a reason for refusal of payment.
Conclusion
If the Whirlpool washing machine does not respond to commands when turned on, the reason is most often obvious: lack of light or a broken socket. Although sometimes the malfunctions are really serious and require complex repairs with the assistance of a specialist.
