Important rules and practical tips for connecting Samsung washing machines

A new Samsung washing machine can be connected by a qualified specialist or independently.

In the latter case, you need to know all the features and comply with the requirements for connecting to communications, as well as have the necessary tool for these purposes.

We will tell you how to install, connect and configure a Samsung washing machine in this article.

Choosing a location: what to consider?

Even at the time of purchasing a Samsung automatic washing machine, you need to decide on the place where it will be installed.

Optimal options:

• kitchen;
• bathroom;
• utility rooms, if any.

When choosing a location, you should consider the following points:

1. According to its dimensions (height, width, depth), the machine must fit in the space allocated for it.
2. Proximity of water supply and sewerage systems.
3. Convenient outlet location. The use of extensions and tees is not recommended.
4. The floor covering must be hard and smooth. The best option is a concrete floor.
5. If the floor is smooth and slippery, you may need a shock-absorbing rubber mat.
6. There must be good ventilation in the designated area, since constant high air humidity is an extremely undesirable phenomenon, which can ultimately lead to equipment breakdowns.
7. There should be no proximity to heating equipment or stoves, as this may cause the device to overheat.
8. There should be convenient access to the washing machine and the ability to open the door freely.
9. At any time of the year, the room temperature should not fall below zero.
10. The power cable must not pass under the bottom of the washing machine.
11. There should be no carpet on the floor under the feet of the device, which may prevent leaks from being detected in time.
12. The minimum gap between the case and adjacent objects should be: at least 5 cm on the back wall and at least 25 mm on the sides.
13. Protection from direct sunlight must be provided.

Preparing for installation

When receiving a new washing machine, first of all, you need to remove the packaging and inspect the case for defects, and also check that the device is complete.

For self-installation, taking into account prepared communications, you will need:

• level determination tool;
• wrench for removing transportation bolts;
• plumbing tools for installing water supply and drainage systems;
• fum tape as a seal;
• sealant.

Transportation bolts are designed to secure the device tank during movement. They are located on the back wall. Depending on the model, there may be a different number of them, which can be clarified in the documents for the washing machine.

After removing the transport bolts, you must:

1. Close the resulting holes on the body with plastic plugs, which are provided by the manufacturer and are included in the kit.
2. Save the bolts for possible future transportation.

It is advisable to immediately install all communications and connections in the place where the washing machine will be permanently located. If necessary, place a mat on the floor against shock absorption. Using level determination, the machine is installed.

The legs will help to correct its position, which, scrolling along the thread, can become higher or lower. When the height adjustment is completed, the locknuts must be tightened. This is done with a wrench. This fixation is necessary to prevent loosening during operation due to vibration.

Even before starting work, you need to make sure that the washing machine is positioned correctly. To do this, you need to try to shake it slightly with your hand.

How to connect to electricity?

The washing machine is one of the household appliances with a high level of electricity consumption, so connecting it to the electrical network requires a particularly responsible approach.

The recommended option is a socket that is directly connected to the meter. The washing machine should be connected to the outlet directly, without adapters or extension cords.

The maximum distance from the machine to it is only the length of the cord. As a rule, this is no more than 150 cm. The outlet must be grounded and protected from water.

How to connect to water supply?

The washing machine comes with a hose for connecting to the water supply.It must be connected at one end to the washing machine itself, and the other end to the cold water intake point. The water pressure in the pipe should be in the range from 0.5 atmospheres to 8 atmospheres.

To connect the hose to the washing machine, attach the end with the filter to the body, tightening the nut well.

For this cut the pipe and insert a special metal tee - with an outlet to the washing machine. A valve should also be installed here to shut off the water supply to the machine.

If you have special knowledge and tools, you can do this yourself, or by contacting a plumber. But it is possible to organize a tie-in from the point of water supply to the toilet, in the area of ​​the mixer, etc.

When planning the insertion location, it is recommended to make it in an accessible place that allows you to shut off the water supply after the end of the wash cycle.

Connecting a washing machine to a water pipe - in the video:

Organization of drainage into the sewer system

Washing machine drain can be organized in two ways:

1. Temporary - in the bathtub, sink or toilet.
2. Stationary - into the sewer.

The stationary option involves inserting into the sewer system. Most often it is made into a siphon, which has a special branch for the washing machine.

If the hose is inserted directly into a sewer pipe, then this must be done very carefully so that it does not touch the wastewater.

The hose insertion point must be secure to prevent leaks and wastewater entering the hose. For these purposes, sealant and sealant are used.The bend point of the hose from the floor should be at least 0.5 m away.

Connecting the washing machine drain to the washbasin siphon - in the video:

Setting up control from a smartphone or telephone

Modern washing machines can be controlled from a mobile phone. This is possible for devices that can connect to the Internet.

Procedure:

1. Download the application to your smartphone.
2. Open the application.
3. Select your washing machine as the control device.
4. Go to settings.
5. Click “Play” to start the cycle.

At first launch, authentication occurs. In the future, internal control will be ensured.

For external control, you must register the washing machine on the website of the manufacturer Samsung Smart Appliance.

Advantages of connecting to a phone:

• control of the washing process indicating how much time is left until completion;
• the ability to remotely start and stop work, as well as program adjustments;
• notification of an error code.

Disadvantages of remote control:

• washing machines with the ability to connect to a telephone are more expensive than their analogues;
• The washing machine is connected via a home network, which may affect the quality of signal transmission/reception.

Not all Samsung washing machines allow you to connect to your phone.

First start

When the washing machine is connected to all communications, you need to make sure that the installation was carried out correctly. The first start of the washing machine is carried out without placing laundry in the drum.

A program with a long cycle and water heating is selected on the control panel. The start button is pressed.

When starting the car for the first time, it is necessary to monitor its operation, paying attention to the following points:

• no water leaks;
• heating water;
• filling the tank with water;
• quality of drum rotation;
• drain work;
• machine behavior during spinning.

If leaks, grinding sounds uncharacteristic of normal operation, and other defects are detected, the machine must be stopped.

If the machine itself displays an error code on the display, its decoding should be clarified in the documentation to the device. There may be an incorrect connection or other user error. Read more about error codes Here.

The first test run allows you to analyze the connection quality and operation of the washing machine components, and also makes it possible to eliminate dirt, lubricant residues, and the specific smell of new equipment from the drum.

Possible difficulties and solutions

While connecting the washing machine, the user may encounter unexpected difficulties, the following tips will help you deal with them:

1. If it is not possible to organize a connection to the sewer immediately after purchasing a washing machine, you can temporarily use the option of draining into a bathtub or sink, and then organize a permanent connection.
2. In the absence of a centralized water supply, the washing machine can be supplied with water using a water tank raised by at least 100 cm.In this case, the hose must be attached to the bottom of this tank and ensure that the container always remains filled. This situation may be relevant for dachas. The cardinal solution is to install a water pump.
3. If, even at the stage of unpacking the new machine, housing defects or insufficient equipment were noticed, it is necessary to demand replacement of the defective equipment.
4. If, upon first start-up, defects in the automatic machine were identified, you must contact a service center that supports Samsung equipment under warranty.
5. Installing a built-in washing machine poses a special difficulty. If you have no experience in carrying out such work, it is better to entrust the connection of equipment to professionals.

Call the master

You can not only install the washing machine yourself, but also use the services of a specialist from a company that repairs household appliances, including washing machines. Finding such companies is not difficult on the Internet.

Average prices in the capital:

• standard installation with disconnected communications – from 600 rubles;
• installation of a built-in machine – from 1,300 rubles;
• installation with preparation of plumbing communications – from 1,800 rubles;
• installation with preparation of electrical communications – from 1,800 rubles;
• comprehensive installation with preparation of communications – from 2,000 rubles;
• dismantling an old machine (free-standing) - from 300 rubles;
• dismantling of a built-in machine - from 600 rubles.

It is recommended to seek help in installing a washing machine from companies that have been practicing in the service market for a long time and have a reliable reputation.

Recommendations

To successfully connect a Samsung washing machine, It is recommended to use the following tips:

1. When planning to purchase a washing machine, you need to take care of the future connection to communications in advance. It may be necessary to replace the siphon with a special one that has a drain outlet (fitting), and organize a tie-in into the water pipe for output to the washing machine.
2. If the floor is uneven, it should be leveled if possible before bringing in a new car.
3. The valve that shuts off the water supply to the washing machine must be closed after finishing the wash, and opened only before starting.
4. To insert washing machine hoses into the sewer and water supply, you must use only high-quality parts, as they are designed for many years of use.

You will find all the most important and useful information about Samsung washing machines in this section of the site.

Conclusion

Connecting a washing machine is an important undertaking that will affect the further operation of the household appliance and the ease of use.

To do this, it is necessary to carefully and hermetically organize all connections, as well as securely install the unit itself. You can do this yourself or by calling a household appliance repair specialist.