Tips and tricks on how to clean a Samsung washing machine

Cleaning a Samsung washing machine is the key to its long and efficient operation. During operation, parts become contaminated, which leads to equipment failure and failure.

Regular maintenance will help you maintain your machine and avoid the cost of repairing it. We will tell you how and with what to clean a Samsung washing machine in this article.

Why do you need to clean your machine?

Various deposits accumulate on the parts of the washing machine over time. If they are not removed, the parts will fail, which can lead to damage to household appliances.

What to clean:

1. Sealing rubber. It is necessary to remove moisture from which mold and mildew develop. Otherwise, an unpleasant odor will appear, which can transfer to things.
2. The heating element must be descaled. If there is heavy deposit, the device will burn out and the water will not heat up.
3. Powder tray. The container into which laundry detergent is poured becomes dirty. The tray may start to leak.
4. Drain pump filter. Small things and dirt get into it, which affects the quality of water drainage.
5. Inlet hose filter. It accumulates sand and rust, which are contained in the water.

The machine door and body may become coated with plaque. Which also leads to equipment damage and failure.

Regular cleaning will help prevent serious problems. It is recommended to clean every 2 months. When washing woolen items, it is recommended to increase the number of cleanings.

Cleaning the cabinet and door

Most often, the body of the washing machine can simply be wiped with a damp cloth without the use of cleaning agents. If the dirt is old, you will have to use the same liquid products that are used to remove plaque on the sink and bathtub. To do this, you need to apply them to the body, wipe with a sponge, and wipe with a clean rag.

You can use available tools:

• 2 tbsp. l. Dilute soda in a small amount of water to make a paste;
• add 1 tbsp. l. citric acid;
• apply the mixture to the glass;
• leave for 10-20 minutes;
• wash off with a damp cloth;
• wipe.

Buttons and other small parts on the case can be cleaned with the same mixture using an old toothbrush.

Cleaning the powder tray

Samsung washing machines, like many modern models, have a tray that has several compartments for chemicals. To pull it out, you need to press on the blue part and pull it towards you, applying a little force.

If the container is not very dirty, it is enough to rinse it with warm water, cleaning the powder with a toothbrush. Most often, plaque has to be removed using special or improvised means.

There are several cleaning methods:

1. Lemon acid. 2-3 tbsp. l. dilute the powder in a small amount of water to obtain the consistency of sour cream. Rub the tray and leave for 15 minutes. Brush and rinse.
2. Soda and vinegar. Pour baking soda into the tray and pour in a little vinegar.A chemical reaction will begin, after which you need to wait about 10 minutes and clean the container with a brush. Rinse with water.
3. Use of chemicals. To clean the powder container, you can use any product that is used to remove scale and limescale. To achieve the goal, it is necessary to thoroughly treat the surface and leave for the time specified in the instructions for the cleaning product. You should not overexpose the chemicals so as not to damage the cuffs and other elements of the tray.

After the mixture sizzles, lower the tray into it and leave for 30-60 minutes. If necessary, the procedure can be repeated.

In extreme cases, the container is filled with vinegar essence. It is important to prevent liquid from getting on the seals.

Cleaning the filter

Filters also require periodic cleaning:

Zalivny

Over time, the inlet hose filter becomes clogged with impurities contained in the water. If it is heavily soiled, the machine stops washing and displays an error indicating that it is impossible to draw water. The filter must be cleaned once every 5-6 months.

To do this you need:

1. Shut off the water supply to the washing machine.
2. Turn the machine around, allowing access to the rear.
3. Find the hose at the top of the body and unscrew the nut that holds it. This can be done with a suitable size wrench or pliers.
4. Inside the hole is the filter itself in the form of a small mesh.
5. Carefully remove it and rinse under running water, brushing with a toothbrush.
6. Place the filter in its original place.
7. Screw on the hose.
8. Open the water supply.

After this, the machine can be returned to its original position, at the same time wiping the back panel with a damp cloth. If the filter is very dirty, it can be immersed in a container with vinegar for 15-20 minutes. Then rinse with clean water.

Slivnogo

The drain pump often becomes clogged with small parts and debris.. If you start it, the machine will display an error indicating that the water cannot drain. In this case, the washing process may stop at the transition to rinsing stage.

To get things out of the drum, you will have to use the emergency drain. Therefore, you need to monitor the condition of the pump and clean it regularly - at least once every 3 months.

To do this you need:

1. Open the door behind which the filter is located. The hatch is usually located in the lower front part of the housing.
2. Lay a towel on the floor and place a small container into which the water will be drained (for example, a baking tray or shallow bowl that will hold about 500 ml of water).
3. Unscrew the filter cap and pull it out, draining the remaining water.
4. Remove accumulated debris from the open hole. This could be wool, hair, small details from clothing decor, etc.
5. Wipe the hole, tighten the lid and hatch.

If there are lime deposits on the cover or inside where the pump is located, they must be removed. This can be done with cleaning products or a solution of soda and vinegar.

If the machine stops during the washing process and refuses to drain the water, you will have to use the emergency drain mode, after which you can clean the pump.

Draining process:

• remove the emergency hose by carefully pulling it towards you;
• remove the plug - it may be difficult to come out, it is recommended to remove it with a rocking motion;
• lower the hose into a basin or other container;
• wait until the water comes out completely;
• unscrew the filter cover;
• clean it.

Older models do not have a drain hose. Water drains through the filter cover. In this situation, it is recommended to place a thick cloth under the hatch and open the filter cover slightly. Periodically changing the fabric or squeezing it out, drain all the water.

Removing scale from heating elements

To remove scale from heating elements, you need to use inorganic or organic acids. Citric acid and vinegar, which are found in every home, have proven themselves to be the best.

Soda and vinegar

To get rid of small deposits, you can use the means at hand:

1. Pour half a glass of soda into the tray used for the powder.
2. Pour 1 liter of vinegar into the empty drum of the machine.
3. Run the wash cycle on the longest cycle at maximum temperature.
4. Wait until the cycle ends.

Experts advise pausing the machine when the water heats up. This will allow the solution to have a longer effect on the plaque.

Citric acid

Citric acid can be used to clean heating elements regularly. To do this you need:

• pour acid into the powder compartment - the amount depends on the volume of the washing machine, for a 5 kg load it will take 3-4 packs;
• run the wash at maximum temperature.

You can clean it every 2 weeks.Read about how to descale your washing machine with citric acid. Here.

By industrial means

Industrial descalers should be used regularly. They all contain alkalis. Therefore, the choice of product depends on financial capabilities and personal preferences.

Among the most popular are:

1. Magic Power – pour 250 to 500 ml of product into the powder container. Start washing at 60 degrees. The price of the product is from 140 rubles.
2. Antiscale – pour the powder into the tray. Start the mode at maximum temperature. Price - 100 rub.
3. Topper – must be poured into the drum for further dry washing at maximum temperature. Price - from 300 rub.

If necessary, cleaning can be done weekly.

Mechanically

To clean the heating element and assess the degree of contamination, you need to remove the heating element. If you have no experience in disassembling washing machines or the equipment is under warranty, then it is better to entrust the work to a specialist.

If you decide to remove the heating element yourself, You must strictly follow the instructions:

• remove the back wall of the case - to do this you need to unscrew several screws and unclip the panel locks;
• disconnect the “chips” of the heating element and remove it;
• soak the heating element in a solution of vinegar or citric acid; you can treat it with special descaling agents;
• dry the heating element;
• Reassemble the machine in reverse order.

Cleaning with abrasive substances or scraping the heating element is prohibited. If the scale does not come off after a single treatment, it is worth repeating the cleaning procedure.

Preventing blockages

The washing machine needs regular maintenance. To prevent dirt from accumulating in it and limescale deposits, you need to follow some rules:

1. Use detergent or detergent in the quantity required. In order not to make a mistake with the dosage, you must carefully study the instructions on the package. Excess powder will not improve the result, but will settle on the walls of the machine or in the detergent tray.
2. Check pockets and small parts on clothing. Some decorative elements should be removed from items before washing so that they do not clog the drain filter.
3. Do not leave laundry in the drum before or after washing.
4. Ventilate the machine regularly.
5. Use a powder that softens the water.

You will find a lot of useful and important information on how to use Samsung washing machines correctly in this section.

Video on the topic of the article

This video will show you how to quickly and easily clean your washing machine:

Conclusion

Your Samsung washing machine will last longer if you don’t let it get dirty. If things become less clean after washing, have an unpleasant odor, or stains, then you should immediately begin a comprehensive cleaning of the device.