Why does the Indesit washing machine display error F08 and what to do about it?

Indesit washing machines are the choice of many Russians. The equipment of this company is distinguished by its affordable price and high reliability.

However, during operation, the device may fail, which it indicates to its owner in the form of a set of signals.

Read the article about what error F08 on an Indesit washing machine means, how to decipher it and fix it.

What does code F08 mean for Indesit washing machine?

Error F08 makes itself felt in different ways. If the equipment is equipped with an electronic display, the inscription “F08” will light up on it.

No display, error can manifest itself with a different set of signals, namely:

• The “Spin” button is lit and all horizontal buttons are flickering;
• the lock flashes quickly and the “Intensive Wash” or “Bleaching” button flashes slowly;
• “Lock” flashes quickly and “Quick wash” flashes slowly;
• “Lock” flashes quickly and “Rinse” flickers slowly.

The set of signals will differ depending on the model of the washing machine. However, all of the above symbols indicate error F08.

Decoding

Error F08 is dangerous. It requires immediate disconnection of the device from the power supply.. This error in 90% of cases indicates a malfunction of the heating element (tubular electric heater). Sometimes such signals arise due to malfunctions in the control unit or when the contacts connected to the heating element are closed.

Error F08 is critical; experts do not recommend further operation of the equipment, as this is associated with a high risk of fire in the wiring.

Reasons for appearance

Error F08 may occur for the following reasons:

1. The sensor responsible for determining the temperature of the water in the tank has failed.
2. The heating element is broken. Since it is this that in 90% of cases leads to the appearance of this error, the search for its cause should begin with the electric heater.

   You can evaluate its performance using a megger. If the resistance is below 20 MΩ, it will need to be replaced.

3. The control unit has failed.
4. The pressure switch (the device responsible for determining the water level in the drum) has failed.
5. The contacts connecting the heating element to the electronic module have shorted or broken. This reason is the third most common after the breakdown of the heating element and heating element. If they are ok, most likely the F08 error is due to a wiring problem. They need to be removed and inspected for damage or rust.

An error can make itself felt both immediately after connecting the device to the network, and during operation.

How to deal with the problem?

The cause of error F08 does not always lie in serious breakdowns; sometimes there is a slight malfunction in the functioning of the electronics.

So first you need to do the following:

• inspect the power cable for defects;
• evaluate the performance of sockets;
• restart the equipment - to do this, turn off the machine and leave it for 20 minutes, after which it is put back into operation;
• check the water supply - it is possible that the cause of the failure was its emergency shutdown;
• reboot the control board - to do this, you need to simultaneously press and hold two buttons: “ON” and “START/PAUSE”.

Replacing the heating element

To replace the heating element in the Indesit washing machine, perform the following actions:

1. First, unscrew all the screws responsible for securing the back cover.
2. Disconnect the chips from the connectors.
3. Bend the tab and unfasten the wiring from the temperature sensor.
4. Loosen the fastening responsible for fixing the heating element. Tighten the central nut, but not all the way.
5. Press the bolt and remove the heating element. For convenience, you can use a screwdriver.

The new part is attached by performing the steps in reverse order.

How to replace a pressure switch?

If it was discovered that the cause of error F08 is a failure of the pressure sensor, proceed as follows:

• de-energize the device;
• shut off the water supply valve;
• remove the top cover of the machine, which is secured with bolts;
• find the pressure switch, which is located on the side wall of the device;
• the connector and hose are disconnected from it, which is attached to the fitting using a clamp;
• unscrew the fastening bolts and dismantle the part.

Attaching the new pressure switch is carried out in the reverse order.

How to change the wiring?

Moisture trapped under the housing can cause oxidation of the contacts.. It is necessary to check the wires leading from the heat sensor and heating element to the control module.

Control module repair

You can start repairing the control module yourself only if you have the skills to perform this type of work.

First, you need to remove the board from the case, and then systematically check all the soldering joints. Only a specialist can find a non-working element.

When should you call a specialist?

If you have no experience in repairing a washing machine, after an error appears, it is recommended to unplug it and call a technician. The cost of the work depends on which part has failed.

Approximate prices:

1. Replacement of heating elements from 1500 rubles.
2. Replacement of wiring from 1500 rubles.
3. Repair of the control board from 2000 rubles, its replacement from 2500 rubles.
4. Replacement of the pressure switch from 1600 rubles.
5. Replacement of temperature sensor from 1300 rubles.

The cost of work is indicated without taking into account the price of new parts:

• A heating element for an Indesit machine costs 500 rubles,
• control module about 8,000 rubles,
• pressure switch 1500 rubles,
• temperature sensor from 400 rubles.

You should trust the diagnosis and repair of your washing machine only to trusted specialists who have proven themselves in the market for providing such services. Such craftsmen have many positive reviews; they do not charge money for visiting your home and detecting a breakdown.

All work is carried out quickly, and replacement parts are guaranteed.. You can find a washing machine repairman on message boards on the Internet. You can contact either a private specialist or a large service center.

Before you agree to repair your washing machine, you need to check with the technician about the final cost of this procedure. For example, replacing a control module will cost about 10,000 rubles.

Prevention

To eliminate the possibility of error F08, you need to adhere to the following recommendations:

• After washing, you need to leave the washing machine door open - this will avoid moisture accumulation and prevent oxidation of the wiring;
• if the tap water is too hard, it is recommended to add special agents to the washing powder to prevent the formation of scale on the heating element;
• if there are frequent voltage fluctuations in the electrical network, it is recommended to install a voltage stabilizer that ensures an uninterrupted supply of current;
• do not exceed the permissible load - if you wash too much laundry in one cycle, this can lead to breakage of any part;
• monitor the condition of the thermostat - disturbances in its operation lead to breakdown of the heating element, the replacement of which is more expensive.

Helpful information

Tips to help when eliminating error F08:

1. Under no circumstances should you begin to disassemble equipment if it is connected to the network.
2. If you have to change parts yourself, then before removing the old elements you need to record their location on a photo or video camera.
3. If the washing machine is under warranty, then you should not open the case and repair the equipment yourself. It is necessary to contact Indesit branded service centers, which are located in almost all major cities.
4. In rare cases, error F08 can be caused by a motor failure. Therefore, if all possible options have been excluded, you need to pay attention to this basic detail.

Read about deciphering error codes for Indesit washing machines. this section.

Video on the topic of the article

What to do if the Indesit washing machine displays error code F08, the video will tell you:

Conclusion

Error F08 is difficult to fix on your own. Most often, to eliminate it, you have to contact a specialist, especially since its appearance threatens to ignite. If you have no experience in repair work, it is better to entrust the equipment to professionals.