Rules for connecting the Indesit washing machine to water and other communications
After purchasing an Indesit washing machine, it becomes necessary to install it correctly and connect it to communications.
This can be done on your own or by contacting a specialist.
In this article we will talk about connecting the Indesit washing machine to water, sewerage, and electricity.
Content
Preparation for the process
To properly connect the washing machine, you need a small set of tools. A set of wrenches and a level will do.
Before actual installation, it is necessary to organize the removal of communications so that the length of the wire and hoses is sufficient. Before starting installation and connection, you must read the instructions for the device.
Selecting a location
It is advisable to decide on a place for the washing machine before purchasing it. An important point is that the dimensions of the washing machine correspond to the free space.
This is especially important when free space is limited or a new machine needs to be built into an existing set.
You should focus on the proximity of sewerage, water supply and electricity. The floor must be level, solid (not sag under the weight of the device), without tilting. In this case, nothing should prevent the machine door from opening freely and the powder receptacle compartment from sliding out.
Based on these requirements, for installation choose:
- bathroom;
- kitchen;
- storage room;
- hallway
In addition to those listed, washing machines can even be installed in places uncharacteristic of their usual location, for example, in a living room. Such options are more typical for hostels and hotels.
The complete set of washing equipment allows you to change its location if necessary.
Bathroom
The location of the washing machine in the bathroom is one of the most popular, since good access to communications is provided. If there is little free space, it is better to give preference to narrow models of devices or top-loading machines.
Kitchen
Built-in models are most often chosen for placement in the kitchen. At the same time, access to running water and electricity is still important, as well as good ventilation and the availability of free space for the dimensions of the washing machine.
Hallway, storage room
This option is chosen in cases where free space and niches are located in the pantry or hallway. Depending on the interior, washing the device can even be placed behind decorative panels. The complexity of installation in this case is related to the distance of communications.
How to connect the Indesit washing machine?
Let's consider the process of connecting a household appliance to communications.
To electricity
To connect to electricity, a separate outlet with a reinforced cable and a separate outlet for the machine must be provided to the washing machine. The use of tees and extensions is not permitted.
Separately, you should worry about organizing grounding. If the washing machine is installed in the bathroom, then the outlet should not be an ordinary one, but a special one - with a lid and protection from moisture.
If there is a problem with voltage in the house, and there are frequent surges, you should take care of purchasing a stabilizer. This will protect the equipment from failure and reduce the likelihood of failures during operation. If there is a stabilizer, the washing machine should be connected to the network only through it.
The electrical supply cord must pass freely - without kinks or squeezing.
To water supply
It is necessary to provide for the water supply to the washing machine in advance.. If it was not there, you will need the help of a plumber.
The washing machine has a hose for filling water. It is included in the kit, but can be purchased separately.
The second end of the hose has no bends. It is connected to the water supply. This type of installation can be done by a plumber. The fastener is organized by tightening the plastic nut by hand.
When organizing a tap into a water pipe for a washing machine It is necessary to install a tap that allows you to shut off the water supply to the device.
Connecting a washing machine to a water pipe - in the video:
To the sewer
Organization of a system for draining waste water from a washing machine can be organized in several ways:
- Direct connection to the sewer pipe. A rubber cuff is used for this.
- Connection via siphon with reliable fixation.
- Drain into a sink, bathtub or toilet. This option is not aesthetically pleasing and can be considered temporary.
An extended hose that is too long is not only unsafe due to possible leaks, it can also quickly become clogged and even cause an unpleasant odor in the washing machine itself.
The drain hose must not run from the appliance along the floor.. It needs to be raised above the tank level. This is necessary for normal operation of the pump and to eliminate the possibility of spontaneous outflow of water from the machine. The exact indicators are indicated by the manufacturer in the technical passport for the machine.
Connecting the washing machine drain to the washbasin siphon - in the video:
Setup and first launch
Proper installation of the washing machine must include leveling it with the floor. To do this, you will need a special tool - a building level. The actual adjustment of the position of the device will be carried out by adjusting the height of the legs.
Procedure:
- place the building level on the top cover of the machine;
- twist the legs of the washing machine to decrease or increase their length;
- it is important to check the stability of the device in the installed position - to do this, you can put your palms on the corners of the machine and try to rock it slightly without using force;
- if the washing machine is not level and sways slightly when pressing on the corners, you need to adjust its position again by rotating the legs;
- If the position is stable, then using a wrench you should fix the position of the legs, otherwise the position of the device may be disturbed during operation as a result of vibration.
During the testing phase, it is important to ensure correct installation and reliability of connections. To ensure the stability of the device, it should be started with maximum spin.
The first start should be without things in order to wash the factory lubricant from the components without fear of staining things.
Typical problems and solutions
When installing an Indesit automatic washing machine Some difficulties may arise that require a separate solution:
-
If the machine is needed in a private house that does not have a centralized water supply, the task becomes more complicated.In this case, it is necessary to organize the water supply using a separate pump or install a container (tank) with water at a height of 1-3 meters from the floor. This is necessary in order to create water pressure.
- If the drain hose is not long enough to tap into the sewer, you may be tempted to extend the hose, but this option is very unreliable.
An alternative way is to make a stationary sewerage supply closer to the location of the washing machine. A temporary solution is to throw the edge of the drain hose into the bathtub or sink.
- If the inlet hose is not long enough or it was simply lost during transportation, you can purchase a hose of the required length separately.
- An uneven floor is a problem left over from an unsuccessful renovation. In this case, you will have to organize a flat, stable platform for the washing machine. When creating it, it is important to monitor its evenness using a building level.
- A slippery floor often occurs when the floor covering is glossy tiles.The problem can be solved by using special attachments on the legs of the machine or a mat that will prevent slipping and prevent the washing machine from “travelling” when washing and spinning around the room.
Call the master
You can call a technician to connect the washing machine. You can find the right contact on the Internet. A technician from a washing machine repair company will carry out the work efficiently and quickly enough.
The cost of the service may vary between companies. If additional work is required along the way, the price will increase. Also, the cost of connection does not include parts that may be needed, for example, a lost inlet hose.
When calling the technician, you must name the model of the device and indicate whether there is a supply of all communications for installation.
Recommendations
When connected The following recommendations may be helpful:
- Immediately after transportation, do not rush to connect the washing machine. This is especially important in winter.
- It is better to take care of the connection to the water supply and sewerage in advance.
- Connecting the washing machine to electricity is a very important point. If you have doubts about the quality of the wiring, you need to call an electrician.
- Before installing and operating the washing machine, you should study the instructions, since different models, even from the same manufacturer, may have their own characteristics.
- If the washing machine is connected after transportation, then you must remember to remove the transport bolts. They are located on the back wall of the device.Instead, special plugs are installed so as not to leave holes on the body.
- For safe operation of the washing machine, it is important to ensure that children and pets do not have access to hoses and electrical cords.
- For insertion into the sewer and for connection to the water supply through a special tee, it is advisable to use only high-quality parts that can last for many years without breakdowns.
Detailed operating instructions for Indesit washing machines are presented in given section.
Video on the topic of the article
How to organize the correct installation of a washing machine, you can watch the video:
Conclusion
You can connect the Indesit washing machine yourself or seek the help of a specialist. If the place is prepared and communications are provided, installation of the device will not be very difficult and will not take much time.
