Detailed instructions for cleaning the drain filter of an Indesit washing machine

In order to extend the service life of the Indesit washing machine and not experience breakdowns for as long as possible, the equipment requires proper care.

At the same time, preventive measures should not be ignored, including cleaning the drain filter.

Where the Indesit washing machine filter is located, how to remove it and clean it, we will tell you in the article.

When should you clean?

The drain filter should be cleaned periodically and, if necessary, if the washing machine malfunctions during the draining stage. The frequency with which preventive treatment must be carried out is depends on the following factors:

• quality of water supplied to the washing machine;
• intensity of use of the device;
• the possibility of foreign objects entering the drum due to distraction.

This situation may be due to the following circumstances:

• work freezes when the washing machine switches to rinsing;
• refusal to work at the “spin” stage;
• lack of drainage or slowdown;
• displaying a message indicating a problem with draining water.

The main reasons for clogged drain filters are the ingress of small debris, threads, hairs and foreign objects from clothing. Even if you handle the equipment very carefully, you should not avoid cleaning the part.

Where is?

The exact location of the drain filter part in front-loading and top-loading machines is determined by the model of the household appliance.

In the Indesit top-loading washing machine

There is a technical hatch door on the body of the device. The exact location depends on the specific model. The filter is always located at the bottom of the housing. The shape of the lid is a recognizable “washer”, similar to the part on machines with horizontal loading.

From horizontal

In a front-loading Indesit washing machine, the filter is located behind the panel, which is located on the body on the front side at the bottom right. Once the cover panel is removed, the part is very easy to find.

Preparing for the cleaning process

When planning to clean the filter, you should prepare rags and a small container (such as a bowl) to drain any remaining water in the machine. Some amount of it will still spill out, even if the machine is empty.

Procedure:

1. Disconnect the washing machine from the supply lines.
2. If necessary, the washing machine should be pulled out so as to provide access to the unit.
3. Place rags on the floor near the area to be worked on.
4. You can install a bowl underneath to drain the water.

If cleaning the filter is carried out as necessary - in the absence of a drain, then quite a lot of water can spill out. To do this, place a container large enough, and the washing machine is slightly tilted towards the rear wall.

Step-by-step instruction

After the car has been prepared, they begin to remove the filter.

How to remove the part?

You must act in the following sequence:

1. Remove the cover panel.
2. Grasp the tab on the lid.
3. Do not turn it sharply counterclockwise. At this point, water will begin to flow out.
4. Pull the tab towards you.
5. Once the part has been turned, you can remove the filter.

Usually the part can be removed without difficulty. But if the process is difficult, then The jamming may be caused by:

• a foreign object, for example, a bra wire;
• dirt and scale deposited on the threads.

How to unscrew and remove the filter? The following steps will help you unscrew the lid:

• lightly tap the body with a plastic hammer or the wooden handle of a regular hammer;
• using pliers, twist the “stubborn” cover by the protrusion;
• It is possible to get to the filter by partially disassembling the device, through the pump.

Cleaning process

The removed filter element must be rinsed in clean water.. The cavity in which it was placed must be cleaned, removing any debris that has accumulated there.

All surfaces - both the holes and the filter itself - must be thoroughly cleaned. Since the processing area is small and has inconvenient access, small tools should be used for these purposes. An old toothbrush, for example, will do. The most convenient way to remove the slimy mass from the cavity is with a soft cloth.

Washing the removed filter itself carried out in the following sequence:

1. Removing small and larger debris from the surface of elements.
2. The nozzle must be washed.This can be done in a bucket, but better - in running water.
3. Let the parts dry.
4. Make sure there is no dirt.

In advanced cases, when cleaning has not been carried out for a long time, simple washing may not be enough. In order to bring the filter into working condition, it should be soaked in a solution of citric acid. This will remove lime deposits from it and remove the unpleasant odor.

For processing prepare a solution based on 0.5 liters of water - 1-2 tbsp. citric acid. The part is soaked for a couple of hours, after which the cleaning is repeated with a toothbrush. It is not recommended to use very hot water for soaking so that the part does not deform and the seal remains elastic.

Resetting

After cleaning the filter and cavity, it is necessary to reinstall the removed part. To do this, the part is placed in the hole and secured by turning it clockwise. The removed plastic panel is installed on top.

The video will show you how to clean the filter of an Indesit washing machine:

System health check

After the filter has been cleaned, you should check the functionality of the drain system and the reliability of the tightness of the unit.

Procedure:

1. Restore communications connection to the washing machine.
2. Set a short wash program with rinse.
3. Wait until the drain begins to ensure that the unit that was being cleaned is working properly.

Possible problems after

Cleaning the filter is a fairly simple procedure, but sometimes problems with water leakage at the work site may subsequently arise.

This state of affairs indicates that the installation was not carried out efficiently or there is a defect in the part. To restore tightness, the unit will have to be disassembled, and remount.

When re-disassembling the unit, it is necessary to very carefully inspect the work area, since physical wear of the parts is possible. If this assumption is confirmed, it is necessary to replace the filter element. In cases where the gasket is worn out, it is only possible to replace it.

In the event that you cannot independently determine the cause of the leak, it is recommended to call a specialist.

What happens if you don't clean it?

The drain filter is essentially a catcher for small debris. If you never clean it at all, then You can expect the following troubles:

1. Bad drain. The blockage will interfere with the normal flow of waste water.
2. Unpleasant odor from the washing machine drum and from already washed clothes. This is due to stagnation of water and active development of microbes.
3. Pump malfunctions. This situation can occur when a foreign object from the filter gets into the pump. In this case, the pump may become jammed, and the impeller blades may even become deformed and break. As a result, repairs and replacement of parts will be required.

You will find maximum useful information about Indesit washing machines in this section.

Conclusion

Cleaning the drain filter is a simple procedure that can be done independently.To carry out the work efficiently, you should familiarize yourself with the sequence of actions in advance and process the unit carefully.