Detailed instructions for connecting a Kandy washing machine to communications
For some, connecting a Kandy washing machine will seem like a complicated job that requires special skills. Actually this is not true.
All you need to make the connection process easy and quick: arm yourself with the right tool, show a little perseverance, and most importantly, study the main stages of the process in advance.
We will tell you more about connecting the Kandy washing machine to communications below.
Content
Preparation
The first stage of the preparatory process is unpacking the washing machine. Removed:
- wooden sheathing,
- cardboard box,
- foam layer,
- brackets holding flexible hoses and electrical cord,
- bars placed between the tank and the washing machine body.
Transport bolts require special attention. They secure the washing machine tank, protecting it from damage during transportation.
The second stage is preparing the tool. To connect the Candy washing machine as quickly as possible, you need to prepare:
- adjustable wrench and screwdrivers;
- pliers;
- sharp knife;
- hacksaw;
- tape measure and building level.
Additionally, you will have to purchase a tee (necessary for connecting to the water supply), sealant, fum tape or plumbing thread.
Selecting a location
A washing machine is a large, heavy household appliance that requires a permanent location. When choosing a location to place the washing machine, A number of important factors are taken into account:
- Proximity to water and sewer pipes.
- Possibility of connection to a grounded outlet.
- Good ventilation.
It is important to place the washing machine in such a place that nothing interferes with free access to the loading hatch and control panel. The household appliance is placed on a flat, hard surface. To ensure natural ventilation of the housing, the washing machine is positioned in such a way that there is 5 cm of free space between the wall and the back and side walls.
Most often, the washing machine is installed in the bathroom or kitchen, less often - in the corridor or utility room (closet).
How to connect the Candy washing machine?
Let's analyze the sequential connection of the Kandy washing machine to communications.
To electricity
The socket to which the Candy washing machine will be connected must exactly correspond to the parameters of permissible energy consumption (the necessary data is indicated in the passport of the household appliance). The grounded socket must be connected to the meter via a separate line, with an output to the machine.
Additionally, a residual current device is installed on the power line (The RCD will operate in the event of a short circuit, protecting the household appliance from malfunctions and the house from fire).
In conditions of high humidity, in the bathroom, special waterproof sockets with a lid are used to connect the washing machine to electricity.
To avoid overloads and fires, it is strictly forbidden to connect the washing machine to the electrical network via an extension cord. It is unacceptable to connect several household appliances to one outlet.
To water supply
Candy washing machine to the central water supply system of the house connects using a special hose (included with the household appliance). One end (straight) is intended for connection to a water pipe. The second end (with an L-shaped turn) is connected to the body of the washing machine.
If the hose from the Kandy washing machine kit does not fit in length, it can be replaced by any long hose with a similar fastening, purchased at a plumbing store. The inlet hose is connected to a metal water pipe using the tapping method, using a crimp coupling.
Algorithm of actions:
The crimp coupling (the part consists of two halves) is fixed to a predetermined place in the water pipe (the coupling is bolted together for strength).- A hole is drilled through a threaded hole in one of the coupling halves, the diameter of which matches the size of the ball valve inlet.
- Screw the end of the filler valve onto the outlet of the ball valve (the threads are pre-lubricated with sealant or wrapped with plumbing tape).
Connecting a water supply pipe to a metal-plastic pipe is much easier:
- a hole is cut in the pipe into which a fitting (tee) is inserted;
- A ball valve is connected to the fitting, to which the end of the inlet hose of the washing machine is connected.
Before starting the process of connecting the washing machine to the water supply, it is necessary to turn off the water supply to the system (turn the inlet valve), and then open the tap to drain the remaining water from the pipe.
To the sewer
Draining waste water from the Candy washing machine into the sewer system can be organized in several ways.
Direct insertion using a rubber collar
Connection to sewerage passes through the tee according to the following algorithm:
- Determine the location of connection to the sewer.
- Cut a piece of sewer pipe and insert a tee (plastic pipe with a branch) in its place.
- Insert the end of the drain pipe into the drain hole on the tee.
Through siphon
This method of connecting to the sewer can only be implemented if the siphon is equipped with a special connection for the drain hose. The end of the corrugated hose is inserted into the drain pipe and tightened with a clamp.
Drain into a bathtub, sink or toilet
This method is very simple: a special curved “hook” attachment is placed on the end of the drain hose, which is thrown over the edge of the bathtub, sink or toilet. This method should not be considered permanent.
The thing is that after each use of the washing machine, the snow-white plumbing fixtures will have to be washed from dirty streaks of waste liquid.
In addition, there is a high risk that the “hook” nozzle will jump off the edge of the bathtub or sink under pressure, and then the entire bathroom will have to be cleaned of dirty stains.
Regardless of the method of connection to the sewer, It is necessary to ensure that the drain hose is not kinked or looped. Experts recommend keeping the bending radius of the corrugation within 50-85 cm (more precise parameters are specified in the washing machine passport).
A special plastic clamp (located on the back panel of the washing machine) will help you fix the desired position of the hose.
Setup and first launch
Before starting the washing machine for the first time, you need to make sure that the body of the household appliance is perfectly level. Minimal misalignment increases the force of vibration, which leads to rapid wear of parts and mechanisms of the internal structure of the washing machine. A building level will help you check how level the housing is installed.
Algorithm of actions:
- The ruler is placed on the lid of the washing machine (alternately in the longitudinal and transverse positions).
- Using a wrench, press out the locknuts on the housing legs.
- By twisting the support heel (clockwise - the leg lengthens, counterclockwise - the leg is shortened) the required position of the washing machine is set.
- Using a wrench, tighten the locknut until it stops, thereby securing the perfectly level position of the housing.
The first start of the washing machine proceeds according to the following algorithm:
- washing powder is poured into the main wash compartment;
- set the washing mode for natural fabrics, the water heating temperature is 60°C;
- turn on the device, close the hatch door;
- Press the “Start/Pause” button.
Based on the results of the first test wash, you can evaluate the quality of the washing machine connection and, if necessary, troubleshoot problems in a timely manner.
The first wash is always done “idle”, i.e. without loading the ram.This is necessary in order to clean the inner walls of the drum from factory grease and unpleasant technical smell.
What difficulties may arise and what to do?
In the process of connecting the Candy washing machine The following unpleasant situations may arise:
Leak at the connection between the inlet hose and the water supply pipe. Replacing the rubber seal and reconnecting the inlet hose will help solve the problem.- Leak at the junction of the inlet hose with the body of the washing machine. To eliminate the leak, it is necessary to forcefully tighten the threaded ring on the inlet hose. Additionally, the joint can be coated with sealant.
- Noise and strong vibration of the washing machine when first started. In such a situation, it is necessary to check whether all transport bolts have been removed from the washing machine body.
If the floor is covered with glossy tiles, you must place the household appliance on a special mat under the legs of the cabinet. This will help prevent the body of the household appliance from moving from its stationary place during the washing process.
Call the master
Don’t have time to figure out how to connect a Candy washing machine to communications? Calling a professional to your home will solve this problem..
You can apply to connect your washing machine by phone or through the service center website (the necessary contacts are not difficult to find through Internet search engines).
The amount of payment for services for connecting a washing machine is determined individually (minimum check - 1300 rubles). The increase in cost may be influenced by: the urgency of completing the order, additional actions for inserting into the sewerage system, water supply system, connecting to the electrical network, the use by the master of parts that the client did not purchase (for example, a ball valve, a tee).
Adviсe
If you don’t have a building level at hand, your smartphone will help you level the washing machine. Just download the “Call Quick Tools” application, select the “Surface Level” option, and then place the smartphone on the lid of the washing machine.
Based on the readings that appear on the display, you can level the washing machine body as quickly and accurately as possible.
Do not rush to throw away the removed transport bolts. If you move, they will help fix the washing machine tank in the desired position, which minimizes the risk of damage during transportation.
Video on the topic of the article
Connecting a Kandy washing machine, video instructions:
Conclusion
Strict adherence to the rules for connecting a Candy washing machine is a guarantee of long-term, problem-free operation of the household appliance.
