Recommendations for connecting a Bosch washing machine to communications

foto41081-1Connecting a Bosch washing machine to communications is a responsible undertaking.

The comfort of using the equipment and its service life will largely depend on the correctness of its implementation.

We’ll tell you in this article how to properly connect a Bosch washing machine, what errors are possible during the process and how to prevent them.

Preparation

It is recommended to start preparing for installation by studying the instructions from the manufacturer, which comes with a Bosch washing machine. The device is taken out of the packaging and the completeness of the package is checked.

Tools

The required set of tools is determined by what work will have to be performed and whether all communications are connected. If everything is ready for installation, then you only need to worry about having a set of keys and the building level.

Transport bolts

After the Bosch washing machine has been unpacked and its place in the apartment has been determined, you need to remove the transport bolts. They are installed on the rear wall and are designed to stabilize the position of the tank during transportation. Usually there are 4 of them.

It is prohibited to use a Bosch washing machine with the transport bolts not removed. In place of the removed bolts, plugs are inserted, which come with the device.

After the shipping bolts have been removed, they must be saved along with the documents for the washing machine, since they may still be needed if the machine needs to be transported.

You can clearly see how to remove Bosch transport bolts in the video:

Selecting a location

It is advisable to select a place to install a Bosch washing machine in advance. The following points need to be taken into account:

  • compliance of the dimensions of the washing machine with the available free space;
  • proximity to utilities (electricity, water, sewerage);
  • ease of use of the device.
The optimal places to locate a Bosch washing machine are: a kitchen, a bathroom, possibly a pantry, a hallway or a utility room.

In rare cases, washing machines can even be installed in living rooms, if other options cannot be implemented, for example, in dormitories or hotel-type housing.

In the room selected for installation of the Bosch washing machine there must be good ventilation and a flat floor (optimally concrete or non-slip tiles).

If the room is always humid, this will negatively affect the equipment due to corrosion and poor drying of the drum and tank between washes. Because of this, mold and an unpleasant odor may appear on the cuff and in the tank. Despite the fact that the space for the washing machine should be taken care of in advance, if necessary, the device can be rearranged.

How to connect a Bosch washing machine?

Instructions for connecting a Bosch washing machine to communications:

To electricity

foto41081-2Connecting a Bosch washing machine must be organized through a separate outlet with output to the machine. The use of extension cords and tees is highly discouraged.

When discharging electricity into the bathtub, special sockets should be installed that are protected from moisture. The outlet must also be grounded.

The electrical cord leading from the washing machine must reach the outlet freely and not be pulled tight.

To water supply

The Bosch washing machine must be connected to cold water. You can arrange the pipework yourself or by calling a plumber. He will install an adapter with a tap to connect the inlet hose of the washing machine. This hose is included with the washing machine, but can be purchased separately.

The Bosch inlet hose has two ends that are organized differently. The one with a bend and a plastic nut is mounted on the washing machine. No special tools are required to secure it; the nut can be easily tightened simply by hand. The second end of the hose is connected to the water supply.

It is advisable to organize the tap into the water pipe in an accessible place so that it is convenient to open and close the tap that supplies water to the device.

To the sewer

Connecting a Bosch washing machine can be done by directly tapping into the drain pipe, through a siphon under the sink, or by throwing the free end of the hose into the bathtub or sink. The last option is inferior to the others in aesthetics and convenience, so it can be considered more as temporary.

If a drain insert from a Bosch machine is made directly into a sewer pipe, the hose must be inserted through the cuff. This will allow it to be fixed and prevent unpleasant odors from drains from entering the apartment.

The Bosch drain hose must be located freely, without kinks or being crushed by furniture. It is important to ensure that it is raised above the level of the tank, according to the manufacturer’s recommendations. Such installation will prevent self-draining from the washing machine and prevent unpleasant odors from the sewer from entering the apartment.

If the drain hose in the device is located in the upper part of the body, it means that the necessary lift is inside the washing machine, and there is no need to organize anything additional about this.

You can see what such a system looks like in the video:

Setup and first launch

Setting up a Bosch washing machine begins with leveling it. To carry out the work, a building level should be placed on top of the washing machine body and, using it as a guide, tighten the legs on the machine. It is important to control the stable position of the washing machine.

You can check the correct installation by trying to swing the device by the corners. If the machine wobbles, the legs need to be tightened further.

The first start of Bosch must be controlled without leaving the machine. To get the technique started, you need to act sequentially:

  1. foto41081-3Plug the electrical cord into an outlet.
  2. Open the water supply tap to the washing machine.
  3. Check the position of the drain hose.
  4. Pour detergent into the powder receptacle.
  5. Select a washing program with additional rinsing, heating the water to 40-60°C and a cycle duration of at least an hour. This will allow you to thoroughly rinse the inside of the washing machine from technical oils and dust.
  6. Check that the drum is empty - without laundry and without foreign objects.
  7. Close the hatch door.
  8. Start the wash cycle.

To start the device for the first time, it is advisable to choose a special tool that is intended directly for the first start.

Possible problems and ways to solve them

When installing a new Bosch washing machine or one brought from another apartment, you can often encounter unforeseen situations and unexpected problems. In most cases, solving them is not difficult:

ProblemWays to solve the problem
Lost inlet hoseYou can purchase a new hose of the required length on the Internet or in specialized stores.
The inlet or drain hose is not long enoughThe supplied hose can be replaced with a part of the required length, or the communications can be brought closer to the installation site of the washing machine.
The sewer connection for the drain hose was not arranged in advanceAs a temporary option, it is possible to use a washing machine with the drain hose with the free end thrown into the sink or bathtub
Despite the level setting, the washing machine moves during washingIf the flooring is made of glossy tiles, the legs of the washing machine may slide on it. The solution to the problem is to use a special mat for the washing machine or purchase pads on the legs that will prevent slipping.
Power surges often occur in the apartmentOutput - connecting the washing machine through a voltage stabilizer
There is no cleaning agent available for the first use of the washing machineYou can use washing powder designed for automatic washing machines.
Uneven floorOrganize a reliable platform with a flat surface for the washing machine

Call the master

foto41081-4If you cannot connect a Bosch washing machine yourself, you must use the services of a specialist.

You can find a company on the Internet. It is better to trust companies that have been operating in the market for a long time providing services and have a reliable reputation.

The price list of individual companies may have significant differences, and it is better to clarify such information with the company’s dispatcher. The cost of work depends on the volume and complexity.

If all communications have already been disconnected, then for connection a master in the capital can charge from 1000 rubles. Installing a built-in washing machine will cost more (from 1,500 rubles).

In the case where communications are not installed and preparatory measures are required, the cost of the work increases significantly - up to several thousand. Additional details, if they are needed when performing work, are paid for separately by the customer.

When calling a technician, you should indicate the manufacturer of the washing machine, the model of the device and whether communications are connected.

Recommendations

When installing a Bosch washing machine The following recommendations may be helpful:

  1. If tap water is not of adequate quality, it is advisable to install a filter to purify it at the entrance to the apartment. This will prevent foreign particles from entering the washer.
  2. When tapping into a water supply system to draw water to the machine, it is necessary to provide for the installation of a tap that shuts off the water.
  3. When starting up the washing machine for the first time, you should not put things in the drum, as they may become dirty after processing due to the fact that the new washing machine contains grease and other technical liquids that remain after the production and assembly of the device.

Conclusion

Connecting a Bosch washing machine, setting it up and starting it for the first time is an important undertaking, the correct execution of which will determine the further operation of the device. All stages of work should be carried out carefully, adhering to the manufacturer’s recommendations and generally accepted rules.

Discussions

How to remove odor

Scratches

Yellow spots