Useful tips on where to pour powder into the Atlant washing machine

foto42318-1When washing things in an Atlant machine, you cannot do without detergents. Only those household chemicals that are intended for automatic processing are suitable for use.

But even they are important to fill according to the rules, adhering to the dosage specified by the manufacturer.

We'll tell you in the article where to pour powder, add conditioner, washing gel, bleach and stain remover, and put capsules in the Atlant washing machine.

Where and how to pour the powder product?

Traditionally, Atlant machines have a retractable cuvette in the upper part of the body with compartments for pouring detergent into it. These compartments, separated from each other, have a common base and are separated by partitions. Additionally, each of them has a number:

Compartment designationPurposeNote
IPrewashIt is necessary to pour powder into this compartment if pre-treatment is selected - for very dirty things
IIMain washPowder is poured into this compartment when choosing any type of washing and for processing any laundry.
Flower imageAir conditionerRinse aid (conditioner) is poured into the designated compartment no more than the level specified by the indicator, as a maximum
*

The compartments in the cuvette can be located in different orders, depending on the model. Most often, the middle part is reserved for air conditioning, the far right one is for pre-washing, and the leftmost compartment is for the main part (usually it is larger than the others in size).

The video will show you how to use the Atlant washing machine tray correctly:

What to do if you fell asleep in the wrong place?

If, through carelessness, the detergent was poured into the wrong compartment, the Atlant machine will still wash it into the drum according to the selected mode. But the result of such processing may not be at all as planned.

If the powder is poured into the conditioner compartment, Atlant will wash it into the drum during the rinsing stage. As a result, things will be rinsed in soapy water and after washing there may be white smudges and stains on them.

Conditioner that is poured in the wrong place will be washed into the drum during the washing phase.. According to its characteristics, it is not intended for removing stains. As a result, things may still be dirty after such cleaning.

If, due to absentmindedness, powder or conditioner was poured into the wrong compartment, it is recommended to remove the cuvette and rinse it. After that, insert and fill everything as needed.

Top-loading and front-loading machines: what are the differences?

foto42318-2In Atlant washing machines with vertical and front loading, the powder compartments have different structures. This is due to the design features of the technology.

In models with horizontal loading, the powder is poured into a cuvette, which is located on the front side of the housing. After filling with household chemicals, it slides back.

In top-loading machines, the detergent compartments are located on the lid.The required amount of detergent does not depend on the type of washing machine load.

Can it be placed directly into the drum?

Some housewives do not use a powder receptacle and immediately pour the powder into the Atlas drum. But the apparent effectiveness of such a technique is not justified. At first glance, you might think that this is even better: the detergent in full gets into the drum, the cuvette does not get dirty.

Manufacturers of automatic Atlant machines developed the design of the device in such a way that the detergent is washed off from the powder receptacle with water under high pressure. This helps the powder dissolve more quickly and ensure that it is evenly distributed and begins to work more efficiently than if it were poured into a drum.

Good dissolution in water leads to the fact that washing The product not only begins to act faster and washes better, but also rinses betterwithout leaving streaks on the material.

Powder that gets into the drum in dry form dissolves much more slowly and more difficultly, and can get stuck in the folds of clothes and pockets. Detergent in powder form should only be poured into the powder receptacle.

How to determine the required quantity?

When measuring out the amount of detergent, You should follow the instructions given by the powder manufacturer. It is located right on the packaging.

As a rule, for heavily soiled items and when processing in hard water, the dosage is increased. Standards may vary between brands. On average it is 1-2 tbsp. for loading.

Exceeding the norms for adding detergent can lead to increased foaming, malfunction, and even triggering of the aquastop in models that have a similar option.For Atlant, all these factors are a critical situation that poses a potential threat to technology.

If you have doubts about how much powder to add, it is better not to add it than to add too much.

Features of dosing other detergents

In addition to the main detergent in powder form, other preparations are also used for washing clothes in Atlanta. Among them:

  • gel,
  • bleach,
  • air conditioner,
  • tablets and capsules.

Gel

foto42318-3Gel is a detergent in liquid form. It is used similarly to powder.

Gels are available for different types and colors of linen:

The liquid form of the detergent makes it possible to place it directly into the drum.

Air conditioner

The conditioner softens the laundry, removes static electricity, and gives the washed items a pleasant smell. It is poured into the appropriate compartment before washing.

It is washed out of the tray during the rinsing stage. Like any product, conditioner needs to be measured. Typically, a bottle cap is used for these purposes.

Bleach and stain remover

Bleach is added to the laundry detergent compartment. The required quantity is determined taking into account the manufacturer's recommendations. Adding a stain remover or bleach can increase the washing efficiency and enhance the effect of the powder.

Capsules

Capsules and washing tablets are the only exception to the general rule of pouring detergent into the machine. It is the pads, and only them, that need to be placed directly into the drum.

Procedure:

  1. Remove the pillow from the packaging.
  2. Place in drum.
  3. Place laundry for washing.
  4. Start the wash cycle.
Capsules should absolutely not be placed in a powder receptacle.Several chambers in the washing pad provide both washing and stain removal and softening of the material.

Recommendations

foto42318-4The following expert advice will help you organize your laundry:

  1. More is not always better. Do not exceed the norms for filling detergents.
  2. The use of hand washing products in Atlanta is contraindicated.
  3. Washing pads are a self-sufficient product that does not require any additions in the form of conditioner or other products.

Conclusion

The operation of Atlant washing equipment includes a set of measures, including the correct addition of detergent.

It must be placed only in the quantity specified by the manufacturer in the powder receptacle cuvette., exceptions are capsules and, if necessary, washing gel. Following this protocol will allow you to wash your clothes efficiently without causing damage to the washing machine.

Discussions
  1. Tatiana

    It is not clear why after each wash it is necessary to remove the cuvette and drain the water from the conditioner compartment. Who can tell me what I am doing wrong? ATLANT washing machine

How to remove odor

Scratches

Yellow spots