List of common breakdowns of Philips steam generators and recommendations for repairing a household appliance

Philips steam generators, like any other equipment, can fail.

You can deal with some breakdowns yourself if you correctly determine their cause. Other faults can only be fixed by a specialist.

In this article we will look at the main faults Philips steam generators (no steam, the appliance does not turn on, splashes water, etc.), as well as tips on how to repair a household appliance with your own hands.

How to disassemble and repair it yourself?

If the cause of the breakdown steam generator Philips is not associated with trivial faults such as an abundance of scale or damage to the electrical cord, so you need to look for it inside the device.

Often the device stops working due to a breakdown of the electromagnetic coil. You can check its performance using a multimeter.

Trying to get inside the device is only possible if you have some knowledge in the field of electronics.

Step-by-step instructions for disassembling a Philips steam generator:

1. Disconnect the device from the network.
2. Remove the protective rubber bands from the steam station and unscrew the bolts that are located under it.
3. Remove the top cover. Below it is the upper case, which is held on by 3 screws. They also need to be unscrewed.
4. Removing the housing, you can see the electromagnetic coil, which needs to be replaced. It is held on by one nut.
5. After replacing the part, the device must be reassembled in the reverse order.

Does not supply steam: what is the cause of the malfunction and what to do?

If after turning on the device it does not supply steam, you can try to deal with the problem on your own. Possible reasons leading to the malfunction:

1. The device is clogged with scale. To get rid of it, you need to clean it. Most models produced under the Philips brand are equipped with an automatic function for getting rid of lime deposits. To do this, pour water into the device, turn it on and press the desired button. After a few hours, the liquid is drained, washing the boiler again. Some models require cartridge replacement.
2. The button responsible for supplying steam is not pressed. To deal with the problem, you need to press and hold it until the device starts working.
3. The appliance is not warm enough. As a rule, steam is supplied 2 minutes after turning on the equipment.
4. There is too little water in the boiler. To start steam supply, you just need to top it up to the MAX mark.

Steam will not be supplied when the device is stationary or placed on weight and at an angle with the automatic steam supply mode turned off. For the device to start functioning, it must be moved to the working position.

Doesn't turn on

If your Philips steam generator does not turn on, the reasons may be the following:

1. The power cord is damaged. When there are no visible defects, it is difficult to determine the broken area. Need help from a specialist.
2. No power in the network. To check the serviceability of the outlet, you need to plug in any other device.
3. Power indicator does not work. In this case, the device itself may be working properly. You need to press the steam button to check its functionality.
4. There was a malfunction in the electronics. In this case, the help of a specialist is required.

When troubleshooting, you need to refer to the instructions that came with the device. It lists the main reasons that can lead to incorrect operation of a particular model.

Water is leaking from the device

If water is leaking from your Philips steam generator, the reasons may be:

1. There is a lot of condensation in the steam supply hose. This can happen after the device has been idle for a long time. To solve the problem, you need to point the sole of the iron to the side and hold the steam button until the water stops coming out. You also need to check the hose for kinks and clamps.
2. The appliance has been filled with water containing aromatic additives or other contaminants.. To cope with the problem, the boiler needs to be flushed. Then clean water is poured into it and the device is started again.
3. The steam boost function has been used too often. You can continue to use the appliance, but wait a little while before pressing the high steam button again.
4. After descaling the appliance there is water left in it. This is what flows out of the sole. You just need to wipe it with a cloth.
5. Gate valve broken. It needs to be replaced.
6. The holes are clogged with scale. To get rid of the problem, cleaning is necessary.

Rusty water splashes

If rusty water flows from your Philips steam generator, the reasons may be as follows:

1. Water with impurities was poured into the device. To get rid of the problem, the boiler needs to be flushed.
2. The device has not been used for a long time, but there is some water left in it. To solve the problem, the tank must be thoroughly rinsed.
3. The heating element has failed. It needs to be replaced.

If flushing the boiler does not help solve the problem, you should contact a service center.

Features of choosing spare parts

To select high-quality spare parts for Philips steam generator repair, you need to adhere to the following recommendations:

• make purchases in stores that do not arouse suspicion;
• demand a receipt and warranty card from the seller;
• purchase parts in branded packaging;
• Inspect parts before purchasing for damage.

How to find a qualified craftsman?

To find a qualified technician, it is recommended to contact a Philips service center. If the service warranty period has already expired, you can find a specialist through advertisements on the Internet or through the recommendations of friends.

A professional never charges money for diagnostics. Payment is made upon delivery of the service. If the master puts the device away, you need to ask him for a document stating that he received it in his hands.

Specialists who value their reputation always provide a guarantee for the work performed. All documents must be certified with the seal and signature of the master.

How to fix it yourself?

Repair recommendations Philips steam generators:

• any repair work related to disassembling the device must be carried out with the device disconnected from the electrical network;
• In order for the steam generator to work properly, it must be descaled at least once a month (subject to regular use);
• When checking the functionality of the device, you need to be careful: if a burning smell appears, you must disconnect it from the network and contact a service center;
• complex repairs should be performed by a specialist.

Useful video

Philips steam generator does not supply steam, video repair instructions:

Conclusion

In order for the steam generator to work for a long time and properly, you must strictly follow the instructions for its operation. It will not be possible to prevent all breakdowns, but it is quite possible to reduce the likelihood of their occurrence.