Without traces, or how to remove a sticker from a refrigerator at home

A new refrigerator is almost always covered with labels containing related information about the household appliance.

These stickers spoil the appearance of the item, but they cannot be peeled off from the surface with a slight movement of the hand.

How to remove a sticker from a refrigerator? To remove it, you need to use special methods. These can be improvised means or special chemicals.

These methods also help to get rid of decorative pictures that were once pasted by the owner himself.

How can I remove the label and remove the glue from it using improvised means?

In every home there are liquids, powders, and products suitable for dissolving the adhesive base of labels.. They are popular among housewives due to their availability, low price, and lack of aggressive substances in them. Each option differs in its labor costs, time and efficiency.

Soap solution

One of the simplest and most harmless remedies. Suitable for work:

• any soap,
• washing powder,
• washing gel for dishes.

The product is applied to the label and left until the top layer is completely wet.

After this, the decorative coating is removed. The remaining glue is soaped again and washed off with a sponge.If the adhesive base cannot be cleaned with soap, use other household solvents.

Soda

Sodium bicarbonate is used for final removal of adhesive traces. To do this, the powder is diluted with a small amount of water to form a paste-like mass.

Then, using a sponge, apply the paste onto the glue stain. Using circular movements, remove stuck particles from the surface. Then wipe the area with a clean cloth.

Alcohol

Any alcohol-containing liquid can dissolve glue. This is the basis for their use. Cleaning begins by removing the top paper or film layer.

Eraser

A stationery eraser is used not only for erasing pencil drawings and inscriptions. It helps to remove strong stickers on the enamel of household appliances.

The cleansing process consists of several manipulations:

1. The label is moistened with a soap solution.
2. Allow the surface to dry completely.
3. Use the soft side of the eraser to scrape off the sticker.
4. The glue particles are wiped with nail polish remover.
5. Repeat processing with an eraser.

How to remove with nail polish remover?

This product is often used to dissolve adhesive residue after the underlying paper or laminated label covering has been removed.

For work, you should choose a liquid that does not contain acetone.. This substance may degrade the appearance of your refrigerator's enamel.

Apply nail polish remover to a cotton pad and moisten the sticker generously. After this, wipe the surface with a sponge, napkin or eraser. If necessary, the processing is duplicated.

Kerosene

This product is considered highly effective. However, when working with it you need to be prepared for a specific smell. Work begins by removing the top decorative layer of the label. Then the remaining traces of glue are moistened with kerosene.

Glass cleaner

The type of liquid for washing windows and mirrors does not matter.

The product is sprayed onto the label and left for 5-7 minutes.so that it has time to absorb into the paper. After this, the sticker, if it is paper, is washed with a foam sponge.

During the cleaning process, you can additionally wet the surface to be treated. After removing the picture, wipe the area with a cloth soaked in water.

How to clean with a melamine sponge?

The product has proven itself as a convenient cleaner for household surfaces.:

• mud,
• fat,
• ink,
• glue.

The action of the melamine sponge is based on the principle of a stationery eraser. First, the surface of the label is moistened with water. The sponge itself is also moistened and lightly wrung out.

After this, rub the sticker with a sponge, applying physical force. As you clean, the volume of the melamine eraser decreases. Despite all the effectiveness of the method, after cleaning you have to collect crumbs and waste from the sponge.

Vegetable oil

Thanks to its soft, fatty base, the product does not violate the integrity of the enamel coating.

Vegetable oil can be replaced with analogues: petroleum jelly or essential oils. Regardless of the choice of oily solvent, the cleaning algorithm remains general.

First, remove the outer decorative layer of the sticker using a suitable method. Then wipe the adhesive stain with oil.Using a sponge or cloth, roll the glue from the edges to the center. After treatment, wipe the surface with a soap solution and then with clean water.

Steam generator

The reservoir of the heating device is filled with water, after which the steam flow is directed onto the glued sticker. Processing time is 5-10 seconds.

Carefully remove the wet label with a blunt spatula. If there are traces of glue left on the surface of the refrigerator, they can be removed with any available means.

However, with this method of cleansing, you must be careful, as hot steam can cause burns.

How to quickly remove with special compounds?

If the available liquids and powders do not inspire confidence for any reason, you should pay attention to ready-made preparations from the category of household or technical chemicals. To remove stickers from the refrigerator, products are suitable whose instructions say “sticker, tape, glue remover.”

Another selection criterion may be ease of use and time spent on processing. The most effective means include:

HG Sticker Remover

Universal solution. Copes with:

• self-adhesive labels,
• traces of tape,
• oil,
• tar.

The reagent contains non-ionic surfactants (no more than 5%). After applying the liquid, the sticker is allowed to get wet, after which it is removed. The product is convenient because it does not require rinsing. A 300 ml bottle has a price tag of 410 rubles.

Consumers give different ratings to HG Sticker Remover. Noted:

• strong unpleasant odor
• economical consumption (the bottle is enough for a large area),
• unsuitable for plastic surfaces.

However, most users agree that the product really helps remove the sticker.

KUDO

The product is intended for cleaning:

• metal,
• ceramics,
• plastic,
• glass from self-adhesive labels, adhesive films and tapes, tape residues.

The cost of a bottle is on average 330 rubles. All users who have tested KUDO 11596419 recommend it for use in practice.

The main thing that is noted in the reviews:

• high efficiency,
• fast action of the composition,
• acceptable price,
• economical consumption.

KANGAROO Scotch Remover

Aerosol from a South Korean manufacturer. The product relieves:

• stickers,
• tape,
• resins,
• tar and other petroleum products.

A 450 ml bottle costs an average of 440 rubles. There is an opinion among consumers that the declared effectiveness in practice is not 100% justified. The sticker can be removed, but this requires a lot of effort. Besides, the aerosol has too strong an odor.

Features of removal depending on the type of sticker

Stickers applied to household appliances differ in the material they are made of. The method of cleansing largely depends on this. The only common methods for removing traces of glue that remain after removing the picture itself are:

1. Paper labels. They are able to absorb water, so they are cleaned after soaking with any liquid (water, soap solution, alcohol).You can scrape off the paper with a sponge, wooden or plastic spatula.
2. Polymer and laminated labels. The top layer is removed manually. The corner of the sticker is pryed up and, by pulling it, the entire sticker is peeled off. You can make this process easier by heating with a hairdryer. The heat melts the adhesive and the label comes off effortlessly.
3. Old stickers. Their removal depends on the quality of the base: paper and polymer require their own methods. Cleaning is complicated by the fact that over time the glue hardens and for soaking it is necessary to increase the exposure time.

Tips on the topic of the article

Any suitable method can be used to remove stuck labels. At the same time, it doesn’t hurt to remember ways to improve work efficiency and safety measures.

The list of main recommendations includes:

1. Unwanted stickers should be removed immediately. The enamel surface around the label changes color over time and after removing the old picture the difference may be noticeable.
2. Do not scrape off the glue with a sharp object, as it can damage the enamel that covers the household appliance.
3. If you are using a chemical for the first time to clean the enamel surface, you should first try it on an inconspicuous area of ​​the refrigerator.
4. After using any cleaning agent, wash the surface of the refrigerator with soap, then with a clean damp cloth and finally wipe dry.

You will find useful tips and tricks for cleaning your refrigerator in this section.

Useful video

This video will show you how to remove sticker marks from your refrigerator:

Conclusion

To remove new and old stickers from the surface of the refrigerator, you can use any suitable household and store-bought products and tools.

When choosing, it is important to focus on the quality of the label, since removing paper and polymer products has its own nuances. It is also worth considering general recommendations regarding the cleansing process.