How to quickly and effectively clean a mouton fur coat at home?
Mouton, like any other natural fur coat, needs periodic cleaning. Since it is absolutely impossible to wash such a delicate item, it would be more reliable to use dry cleaning services.
But in practice, few people resort to such a step, and prefer to clean the fur at home.
It is only recommended to use the most gentle methods so as not to spoil an expensive product. It’s better to first test the selected product on a small area.
If everything is done correctly, then the fur coat will delight its owner with a chic look for many years. About, how to clean a fur coat, we'll tell you below.
Content
Is it possible to use a washing machine?
Is it possible and how to wash a mouton fur coat? Washing by hand or in a washing machine is the worst thing you can do. regarding the mouton fur coat. In addition, wearing a fur coat is risky even when exposed to rain or sleet.
As a result of prolonged contact with water, the natural fat present on the leather base (hide) is leveled. And this leads to the loss of fur elasticity and visual appeal.
Another important point that makes washing a mouton difficult. When moisture is absorbed, the fur becomes so heavy that it is impossible to even lift it with your hands.
Moreover, an automatic machine will not be able to cope with such a task.. The result is a damaged item and equipment.
Wet cleaning instead of washing
When processing a product wet, it is important to avoid getting the core (the underside of the skin) wet. If this happens, then after drying it becomes rough and deformed. Therefore, use a thoroughly wrung-out napkin (gauze, cotton cloth) or sponge.
For cleaning heavily soiled areas you can use the following means:
- soap solution;
- ethyl or ammonia (ammonia);
- salt;
- table vinegar;
- glycerol;
- lemon juice;
- hydrogen peroxide.
The last resort is considered the most aggressive, so using it on dyed fur is risky.
Soap solution
To prepare a soap solution, you will need water and something foaming (washing powder, shampoo, baby soap, carpet cleaner).
Then a sponge is moistened in the resulting liquid and the fur surface is treated. Remains of foam are cleaned off with a brush dipped in cool water.
If you clean dyed sheepskin, choose a washing powder without a bleaching effect. This does not apply to white fur.
Vinegar and alcohol
A mixture of alcohol and vinegar will help get rid of greasy stains. It is necessary to combine the following ingredients in equal proportions:
- 10% ammonia;
- table vinegar;
- water.
Mix thoroughly and soak a cotton swab in the solution. or disk.They go over the entire surface of the fur coat, paying special attention to the most contaminated areas.
Then wipe the fur with a clean, damp cloth and place the item on hangers to dry.
Hydrogen peroxide
Hydrogen peroxide effectively removes greasy shine, yellowness and greasy stains. The recipe for the cleaner is simple.
You need to take 500 ml of water and add:
- 3 tbsp. l. table salt;
- 5–6 ml of hydrogen peroxide.
This option is especially relevant for fur coats made of white and light sheepskin.
Ammonia
A dark mouton fur coat can be cleaned with ammonia. It is mixed with cold water in a ratio of 1:4.
Then dip a sponge or piece of fabric into the solution and carefully begin to process the fur product.
Even if the fur coat is not very dirty, This recipe is useful for adding freshness and shine..
After the end of the winter season, it is recommended to use this method before putting the fur coat in the closet for summer storage.
Cleaning from dust
Fur items absorb dust well. Therefore, even in the absence of visible dirt, it would be useful to periodically subject the fur coat to light cleaning.
To do this, just shake the mouton well (it’s better to do this outside) or use a vacuum cleaner turned on at minimum power mode.
In ecologically clean regions you can lay the fur coat out on the snow, nap side down, and gently beat it with a beater. After this, shake it so that no snow remains on the fur. Otherwise, when it melts indoors, it will harm the pile.
An alternative to this technique is a wetted and wrung out sheet, which is covered with a fur coat and lightly tapped on top (like a carpet). Hang on hangers to dry.
Dry cleaning
For dry cleaning of a mouton fur coat one of the listed means will do:
- wheat bran;
- talc;
- semolina;
- starch;
- fine sand.
Proceed as follows:
- The fur coat is laid out on a flat surface.
- The selected cleaning product is preheated in a dry, hot frying pan.
- Spread it evenly over the surface.
- Carefully begin to rub it into the fur.
- Leave the product in this condition for some time so that dirt and grease are absorbed.
- Lift the fur coat and shake well several times.
How to clean white fur at home?
Light mouton requires a special approach when caring. Before you begin the cleaning procedure, you should get a special fur brush.
First, inspect the product for the presence of the most greasy places:
- collar,
- cuffs,
- hem,
- pockets.
It is odorless, does not contain harmful impurities and has increased volatility. That's why it quickly disappears without a trace. Sold in any hardware department.
There is no need to dilute pure gasoline with anything. Put protective gloves on your hands, moisten the sponge and begin to rub the greasy and yellowed areas on the fur.
Wait a certain amount of time for the pile to dry completely. This is where the procedure ends.
It is recommended to treat fur coats with gasoline in the fresh air. It is unacceptable to smoke while working!
To give a white mouton coat a fresh look, you can use hydrogen peroxide (3%).It is diluted in equal proportions with water and a damp cloth is passed over the entire pile. At the same time, they do not try to wet it too much.
After this, the fur coat is dried naturally and combed. A mixture of hydrogen peroxide and ammonia returns the fur coat to its former shine. It is enough to add a few drops to a bottle of peroxide.
Another equally productive option for cleaning light sheepskin is combination of soap solution with starch. Cover the stains with starch and spray with soapy water from a spray bottle.
Use your hand to distribute the resulting slurry over the area to be treated. Wait until the applied product dries, and then remove it with a vacuum cleaner or brush.
How to dry it properly?
A mouton fur coat should be dried exclusively in a vertical position on hangers. Be sure to fasten all buttons and existing fasteners. The ambient temperature should be room temperature.
After the final drying of the fur you need to comb it with a standard plastic or wooden hair brush. Wet areas should not be touched so as not to tear out the downs.
How to wash the lining at home?
If everything is very clear with cleaning fur, then all that remains is to figure out how to proceed with the lining.
There are two ways to clean it:
- directly on the product;
- pre-rebuff.
Each option has certain difficulties. In the first case, there is a high risk of damage to the product as a whole, in the second, it will take a lot of time and effort.
Deciding to update the lining fabric without ripping, prepare a soap solution and a soft sponge. Next, you need to dissolve a little soap in warm water. Lightly moisten the sponge in the liquid and begin processing.
Once completed, wipe the fabric again with clean water. Dry with paper napkins. Hair dryers and irons cannot be used.
In the second case The torn lining is washed by first soaking it in soapy water.. After washing and drying, the fabric is ironed and sewn in its original place.
Video on the topic
Check out the expert's opinion on washing natural fur coats:
Conclusion
A sheepskin coat is a luxurious thing that you need to learn how to properly care for. Then it will look like new for many years. Frequent cleaning is not recommended, but after the end of winter they do this without fail.
