Effective techniques and methods for straightening the padding polyester in a jacket after washing

Proper care of jackets and down jackets extends the life of the product and helps maintain its original appearance.

No less important than proper washing is the drying process, or rather distribution of loose fluff or padding polyester.

An incorrectly selected detergent or high temperature can cause the appearance of broken lumps of filler.

How to straighten the padding polyester in a jacket after washing? You can correct the situation and return a winter item’s presentable appearance and warming properties using several methods.

What to do if the fluff in your down jacket is clumped?

Errors made during the process of washing or drying a jacket can cause:

• filler spreading,
• formation of lumps.

How to distribute and beat the filler manually?

With a little effort and patience, you can straighten the padding polyester manually.

In order for the result to meet expectations, it is necessary to follow a certain sequence of actions:

1. The washed jacket is lightly wrung out, excess water is allowed to drain, and hung on hangers.
2. After the item has dried, feel with your hands, simultaneously straightening out the formed lumps of filler. Each cell is gently rubbed between the palms, thereby distributing the padding polyester.

After the process of straightening the filler is completed, the down jacket is thoroughly shaken several times.

We use a washing machine

Repeated spinning of the product will help return the original volume to the filling of the down jacket as quickly as possible, without spending much effort.

Algorithm of actions:

1. The jacket is turned inside out, fastened with a zipper and buttons.
2. A jacket and four tennis ball or laundry ball.
3. We set the spin mode (maximum number of revolutions 800). As the balls spin, they hit the jacket, straightening out its filling.

How to fluff and break up clods using a vacuum cleaner?

A simple but very effective way to return your jacket to its original volume is to use a vacuum cleaner. There are two options for implementing this method.

In the first case, you need to prepare a vacuum bag and a vacuum cleaner with a reverse air supply function.

Algorithm of actions:

1. Place the jacket in a vacuum bag.
2. Using a vacuum cleaner, excess air is sucked out of the bag.
3. The vacuum cleaner switches to reverse air supply (blowing) mode.
4. We fill the vacuum bag with air again.

This procedure must be repeated three or four times. After this, the down jacket is removed from the bag and shaken thoroughly.

The vacuum bag can be replaced with a plastic bag.For those who do not have a vacuum cleaner with a reverse air supply function, an equally effective, but more labor-intensive way to restore the volume of a down jacket will come to the rescue.

Algorithm of actions:

1. The down jacket is turned inside out.
2. The product is laid out on the table or carefully hung on hangers.
3. Using a vacuum cleaner with an attachment for cleaning upholstered furniture, we carefully pass over the jacket, simultaneously stretching and distributing lumps of filler.
4. At the end of the process, shake the jacket thoroughly.

A carpet beater will help smooth out synthetic padding that has become matted and rolled up

The method of breaking up the formed lumps will help to straighten the padding polyester after washing. A carpet beater is used for these purposes.

The beater should be round in shape, without sharp corners.

Algorithm of actions:

1. Zippers and other fasteners are fastened on the jacket and hung on hangers.
2. Methodically, with not very strong blows, they pass over the lumpy lumps of filler.
3. During the knocking process, the trigger needs to be shaken periodically, but frequent and strong knocking of the jacket can ruin the thing.

Steaming method to restore what has been crumpled

Using an iron with a steam function will help you quickly straighten the padding in your jacket.

Algorithm of actions:

1. The washed and dried down jacket must be laid out on an ironing board.
2. Places where the filler has formed clumps are covered with damp gauze and gently ironed using the steam setting.
3. The steps are repeated until the desired result is obtained.

After steaming, the jacket is shaken, hung on hangers, and stored in a closet.

Hairdryer

Using a hairdryer will help you quickly straighten out stray padding in a washed jacket. The air flow from the hair dryer should be cold. Otherwise, there is a high risk of product damage.

Algorithm of actions:

1. The washed jacket is carefully hung on hangers.
2. Wait a while for the water to drain and the item to dry a little.
3. Turn the jacket inside out.
4. Consistently blow each cell with cold air from a hairdryer, simultaneously distributing and straightening the padding polyester.

During operation, the jacket is shaken periodically.

If nothing helps?

If you couldn’t return the down jacket to its former volume at home, Seamstresses from the studio will come to the rescue.

On average, the service for replacing padding polyester in the studio will cost 1000 rubles (excluding materials).

How can I prevent this problem in the future?

You can prevent the problem of padding polyester rolled into clumps in a jacket if you approach the washing process competently, following certain recommendations:

1. Jacket filled with padding polyester turn it inside out and only after that put it in the drum of the washing machine.
2. Tennis balls thrown into the drum along with outerwear will help prevent the filler from clumping into clumps.
3. For washing, set the temperature to 30C.
4. To clean down jackets or jackets with synthetic padding, you cannot use ordinary granular washing powders.Dry particles do not dissolve well and wash out, clogging the padding polyester, thereby disrupting the uniformity of the padding polyester layer. Recommended for washing liquid detergents for delicate fabrics.
5. Wash triggers on padding polyester separately from other things.
6. Outerwear is spun at speeds not exceeding 800 per minute.
7. Do not store washed items in vacuum bags. It is correct to hang a jacket or down jacket over your shoulders, cover it with a cover and hide it in a closet.

Conclusion

In order to avoid the appearance of lumps of padding polyester in the jacket, it is necessary to strictly observe rules for washing jackets and down jackets And drying the product.

If the problem cannot be prevented, Putting the tips described in this article into practice will help restore the product to its original appearance.