Useful tips on how to wash a holofiber pillow in a washing machine and by hand

foto2448-1 Holofiber is one of the popular synthetic fillers, which is often used for stuffing pillows.

Like any bedding, a holofiber pillow needs regular washing, which must be done according to all the rules.

In this article we will tell you how to wash a pillow correctly from holofiber in the washing machine and by hand.

Content

Preparing for washing
Can it be loaded into an automatic washing machine?
- Step by step process
How to wash by hand?
Proper drying
Filler recovery
Conclusion

Preparing for washing

Holofiber is a synthetic filler that is a non-woven material. It consists of elastic spiral fibers that form a large number of air pockets.

The material has many advantages:

elasticity;
possibility of doing laundry at home;
good heat retention;
safety;
elasticity;
availability;
hypoallergenic;
long service life;
does not absorb moisture and odors.

Recommended number of washes: once a year. With more frequent washing, or carried out in violation of the technology, the pillow will quickly become unusable and require replacement.

In between washes, it is recommended to ventilate the holofiber pillow outdoors in the shade.

Polyester fibers, intertwined with each other, form a springy material, especially suitable for stuffing fluffy elastic pillows.

In order not to damage the structure of the synthetic filler, it should be washed in compliance with the following rules:

Avoid soaking items, especially for a long time.
Only liquid detergent should be selected.
Dry powders are not only difficult to wash out of the material, but they also lead to the formation of unsightly stains on the cover.
Do not use bleaches containing chlorine as they can damage the fibers of the filler.
The washing temperature should not be higher than that indicated on the label on the product. If it is not there, then no more than 30-40?C.
Special attention must be paid to thorough rinsing, regardless of the type of wash.

In cases where the pillow cover is heavily soiled, it is permissible to wash the affected areas (using liquid detergent diluted in water) before washing. If only the cover is dirty and the padding is not damaged, washing only that cover may be sufficient.

The optimal option is often the one with interchangeable nappers to the pillow, allowing you to wash them more often without using the filling material.

Can it be loaded into an automatic washing machine?

It is advisable to determine whether a pillow with synthetic filling can be washed by looking at the tag. If there is none, then the suitability of the pillow for washing is determined experimentally:

A heavy book is placed in the middle of a horizontally positioned item.
After a few minutes the weight is removed.
Based on how quickly the original shape of the item is restored, a conclusion is drawn about the possibility of washing.

If recovery is quick, the pillow can be washed in a washing machine. Otherwise, it is not advisable to do this, since the stuffing is of poor quality or the item has reached its wear and tear and requires replacement.

Machine washing is less preferable than hand washing, since the lush filler, evenly distributed throughout the entire volume of the pillow, clumps into uneven clumps when washed in a machine.

Intensive rinsing and spinning can render the item completely unusable. In this regard, gentle hand washing is recommended, and if necessary, machine washing on a delicate cycle. If the napkin requires intensive washing, the holofiber is removed and the cover is washed separately.

Step by step process

Automatic washing machines make washing easy and quick. You must first make sure that the item can be subjected to such processing.

Procedure:

studying the label on the product to make sure that the filler is holofiber;
the product is placed in the washing machine without pre-soaking;
setting the machine regulator to the “delicate wash” or other (“synthetics”, “bulky items”) mark, depending on the type of machine;
pouring liquid into the washing machine container;
After washing, the item is carefully wrung out by hand and dried in the open air.

In cases where the contamination of the pillow is significant, it the filler can be washed in parts. In this case, each “batch” of holofiber is first placed in a pillowcase or other case with a fastener, and washed separately.

When using an automatic washing machine, it is necessary to set the minimum spin speed or completely exclude it from the wash cycle.

How to wash by hand?

Hand washing requires more effort. But with this option the impact on the padding is controlled, which allows you to wash the product carefully. For hand washing holofiber pillows, only detergent in gel form is also used.

For very large pillows with significant volume, hand washing is also preferable to tamping the item into the washing machine drum.

Work order:

fill a large container, for example, a bath, with warm water;
dilute liquid detergent in water;
immerse the pillow in water;
get it completely wet;
Turning, keep it in the bath for 20-30 minutes, turning often. Do not use intense impact, which can damage the holofiber and provoke the formation of foam. For light stains, the effect of detergent dissolved in water will be sufficient;
gently squeeze;
You should rinse several times, replacing the water. Or rinse under running water. At the final stage, the water should be clean after rinsing and there should be no foam;
after that, squeeze and dry again.

If you don’t have a special washing gel on hand, as a last resort, you can use shampoo.

Proper drying

foto2448-6 After washing, the pillow should be lightly wrung out with a terry towel and placed on the dryer.

In order for the product to dry evenly without forming lumps, it should be beaten and turned during the drying process.

pillow It is not recommended to hang or leave to dry on a surface without bottom ventilation.

In the first case, the stuffing will bunch up in one direction, in the second, drying will be difficult - the holofiber will begin to cake, become damp, and the cover will become covered with unsightly stains.

It is possible to speed up drying. To do this, you can use a regular household hair dryer. In this case, the product being dried must be constantly beaten, allowing air flows to reach the entire volume of the filling.

It is forbidden to dry a holofiber pillow near fire sources or on heating appliances. Also, drying is not carried out in the open sun.

The best way to dry the product is to leave it outdoors in the shade.. It is necessary to change the position of the pillow every couple of hours

Filler recovery

foto2448-7 If the pillow was washed and dried incorrectly, the filling may bunch up unevenly. In order to correct the situation, you need to try to put the packing in order.

The holofiber “balls” should be removed. A deep basin is suitable for this. If the bedside table does not have a zipper, you will have to rip the fabric at the seam to get out the contents.

You can disassemble the filler in one of the following ways:

With your hands.
Acting as a slicker brush, which is used to groom animals.
Combining both previous methods.

All three options are labor-intensive, requiring accuracy and a lot of time.. Despite all the thoroughness of the restoration work, the pillow will not become the same as before.

The maximum that can be achieved is to give the item a look that will allow it to be used for its intended purpose for a short time.

If the filling is seriously damaged, it can be replaced with a new one, leaving the same bedstead. Or you will have to replace the entire pillow.

Conclusion

Using all the above recommendations, you can wash a holofiber pillow at home yourself.

With the right approach, the item will retain its attractive appearance and high performance qualities for a long time. With proper use and proper care, the product can last up to 10 years.